MOFT Snap Case MOVAS™ w/ MagSafe Compatible with Apple iPhone 18 Pro & iPhone 18 Pro Max

Add slim protection, a premium tactile finish, and full magnetic accessory compatibility to your iPhone 18 Pro or iPhone 18 Pro Max with the MOFT Snap Case MOVAS™.

Designed as part of MOFT’s magnetic accessory ecosystem, the Snap Case combines MOVAS™ vegan leather, a polycarbonate structural shell, soft microfiber lining, and built-in magnets in a lightweight form that works with MagSafe charging and compatible magnetic accessories.

The MOVAS™ surface is designed to provide a leather-like hand feel without using animal leather, while the integrated magnetic system allows the case to work with compatible MOFT stands, wallets, battery accessories, and Apple MagSafe chargers.

Separate model-specific versions are available for:

• Apple iPhone 18 Pro
• Apple iPhone 18 Pro Max

These two cases are different sizes and are not interchangeable.

Available Models

Apple iPhone 18 Pro

• Compatibility: Apple iPhone 18 Pro
• MOFT Product Family: MD020
• Dimensions: approximately 153.5 × 75.4 × 16.1 mm
• Weight: approximately 28 g
• UPC: 840131331518

Apple iPhone 18 Pro Max

• Compatibility: Apple iPhone 18 Pro Max
• MOFT Product Family: MD020
• Dimensions: approximately 166.9 × 81.4 × 16.1 mm
• Weight: approximately 34 g
• UPC: 840131331648

Please select the exact phone model before ordering.

Not Interchangeable

The iPhone 18 Pro and iPhone 18 Pro Max use different physical dimensions.

The cases are therefore model-specific.

Do not install:

• iPhone 18 Pro case on iPhone 18 Pro Max
• iPhone 18 Pro Max case on iPhone 18 Pro

Always verify the exact device under:

Settings > General > About

Product Identification

• Brand: MOFT
• Product line: Snap Case MOVAS™
• Product family: MD020
• Product type: MagSafe-compatible fitted protective case
• Compatibility: Apple iPhone 18 Pro / iPhone 18 Pro Max
• Main exterior material: MOVAS™ vegan leather
• Structural material: Polycarbonate
• Interior lining: Microfiber
• Magnetic system: Integrated magnets
• Wireless charging: MagSafe compatible
• Accessory compatibility: MOFT Snap ecosystem and suitable MagSafe accessories
• Warranty for 3C-Easy purchases: 3C-Easy Markham 90-Day Limited Accessory Warranty

Materials

MOFT specifies the Snap Case MOVAS™ as using:

• MOVAS™ vegan leather
• Polycarbonate
• Microfiber
• Magnets

Each material serves a different function within the case.

MOVAS™ Vegan Leather

MOVAS™ is MOFT’s proprietary synthetic leather material.

It is designed to provide:

• Soft leather-like texture
• Comfortable hand feel
• Colour retention
• Easy cleaning
• Lightweight construction
• Animal-free material choice

The product should not be represented as genuine animal leather.

Polycarbonate Structure

The internal shell uses polycarbonate to provide:

• Structural support
• Shape retention
• Protection against surface contact
• Secure phone fitment
• Support for the magnetic assembly

Polycarbonate remains capable of scratching or cracking under sufficient force.

Microfiber Interior

The interior incorporates microfiber intended to reduce direct abrasion against the phone.

The lining helps protect the device from:

• Fine scratches
• Direct shell contact
• Small cosmetic marks

Debris trapped between the phone and case can still cause scratching, so periodic cleaning is recommended.

Key Features

• Genuine MOFT Snap Case MOVAS™
• Designed for iPhone 18 Pro or iPhone 18 Pro Max
• Separate model-specific sizes
• MOVAS™ vegan leather exterior
• Polycarbonate structural shell
• Microfiber interior lining
• Integrated magnets
• MagSafe-compatible charging
• Compatible with MOFT Snap accessories
• Lightweight design
• Slim profile
• Soft-touch surface
• Precision fit
• Raised camera-area protection
• Raised display-edge protection
• Easy access to buttons and USB-C
• Compatible with NFC operation
• 3C-Easy Markham 90-Day Limited Accessory Warranty

MagSafe Compatibility

The case includes an integrated magnetic system designed to work with Apple MagSafe accessories.

Compatible accessory types may include:

• MagSafe chargers
• Magnetic charging stands
• MagSafe wallets
• Magnetic phone grips
• Magnetic vehicle mounts
• Magnetic battery packs
• MOFT Snap accessories

Magnetic attachment strength depends on:

• Accessory design
• Magnet strength
• Device orientation
• Accessory weight
• Surface condition

Compatibility with every third-party accessory cannot be guaranteed.

MOFT Snap Ecosystem Compatibility

The Snap Case is designed to integrate with MOFT’s magnetic accessory system.

Compatible MOFT products may include selected:

• Snap-on Stand & Wallet products
• Tripod wallets
• Magnetic battery packs
• Magnetic stands
• Other MagSafe-compatible MOFT accessories

Exact compatibility depends on the individual accessory generation.

Customers should confirm compatibility with the specific MOFT accessory before purchase.

Wireless Charging Compatibility

The case is designed for MagSafe and compatible wireless charging.

MOFT states that its magnetic cases work with products such as:

• Apple MagSafe Charger
• MOFT Snap Battery
• Compatible MagSafe charging accessories

Charging efficiency may vary depending on:

• Charger
• Power adapter
• Magnet layout
• Coil alignment
• Device temperature
• Battery level
• Attached accessories

The case does not increase the iPhone’s maximum supported charging rate.

Magnetic Accessory Alignment

Integrated magnets help position compatible accessories over the phone’s magnetic charging area.

Proper alignment can improve:

• Charging consistency
• Wallet attachment
• Stand attachment
• Magnetic mount positioning

Remove incompatible accessories if charging becomes inconsistent.

Magnetic Wallet Use

A magnetic wallet may attach to the rear of the case.

Holding strength depends on:

• Wallet design
• Magnet strength
• Number of cards
• Phone movement
• Surface condition

A magnetic wallet may detach during:

• Drops
• Sudden movement
• Pocket removal
• Running
• Vehicle vibration

Do not treat magnetic attachment as permanent retention for important cards or identification.

Magnetic Vehicle Mounts

Compatible magnetic vehicle mounts may work directly with the case.

Before driving:

1. Confirm the mount is securely installed.
2. Attach the phone firmly.
3. Test retention.
4. Position the phone so it does not block the driver’s view.
5. Follow applicable distracted-driving laws.

Road vibration and sudden braking can affect magnetic retention.

MOVAS™ Surface Feel

MOFT developed MOVAS™ to provide a premium leather-like feel without animal leather.

The surface is intended to feel:

• Soft
• Smooth
• Slightly textured
• Comfortable in the hand

Surface feel may change gradually through normal use.

Colour Retention

MOFT markets MOVAS™ as a high-colour-retention material.

Actual appearance may still change because of:

• UV exposure
• Skin oils
• Dirt
• Abrasion
• Strong chemicals
• Clothing dyes
• Normal aging

Dark and light colours may show wear differently.

Cleaning MOVAS™

For ordinary cleaning:

• Use a soft damp cloth
• Wipe gently
• Allow the case to dry naturally

Avoid:

• Bleach
• Acetone
• Strong solvents
• Harsh household cleaners
• Abrasive pads
• Prolonged soaking

MOFT has previously advised avoiding strong chemical cleaners on MOVAS™ products.

Alcohol Cleaning

Where alcohol is used, avoid high-concentration or aggressive cleaning solutions.

Repeated chemical exposure can affect:

• Surface finish
• Colour
• Texture

A mild cleaning method is preferable for routine maintenance.

Lightweight Design

MOFT lists the approximate weight as:

iPhone 18 Pro

28 g

iPhone 18 Pro Max

34 g

This makes the case relatively lightweight for a magnetic case with an interior lining.

Actual weight may vary slightly by production tolerance and colour.

Dimensions

iPhone 18 Pro Case

Approximately:

153.5 × 75.4 × 16.1 mm

iPhone 18 Pro Max Case

Approximately:

166.9 × 81.4 × 16.1 mm

These measurements refer to the case exterior rather than the bare phone.

Slim Profile

The Snap Case is designed to maintain a relatively slim silhouette.

Potential benefits include:

• Comfortable one-handed use
• Reduced pocket bulk
• Easier magnetic charging
• Better accessory compatibility
• Lower added weight

Any protective case will still increase the overall dimensions of the device.

Camera Protection

The case incorporates raised structure around the rear-camera area.

This helps reduce direct lens contact when the phone is placed on a clean, flat surface.

Camera damage may still occur if:

• The phone lands directly on the camera
• The camera strikes a raised object
• A sharp object hits the lens
• The impact is severe

A compatible camera-lens protector may provide additional surface protection.

Camera Protector Compatibility

Third-party camera protectors may fit depending on their:

• Thickness
• Width
• Frame shape
• Installation position

Oversized protectors may interfere with the case.

Do not force an incompatible case/protector combination.

Raised Screen Protection

The case perimeter is designed to provide some clearance around the front display.

When the phone is placed face-down on a flat surface, the case edge may reduce direct screen contact.

It cannot prevent all screen damage.

A properly fitted screen protector is recommended for additional protection.

Screen Protector Compatibility

The Snap Case should work with many case-friendly screen protectors.

Compatibility with every screen protector cannot be guaranteed.

Interference may occur if the protector:

• Extends too close to the outer frame
• Has thick edges
• Is misaligned
• Is already lifting

Possible symptoms include:

• Edge lifting
• Air bubbles
• Reduced adhesion

Button Access

The case is designed to preserve normal access to the phone’s physical controls.

After installation, test:

• Side button
• Volume buttons
• Camera-related controls where applicable

Button feel may differ slightly from using the phone without a case.

USB-C Port Access

The case provides access to the iPhone USB-C port.

Supported functions may include:

• Wired charging
• Data transfer
• Computer connection
• Vehicle connectivity
• Compatible USB accessories

Some third-party USB-C plugs with oversized housings may not fit every case opening.

Do not force a connector.

NFC Compatibility

MOFT states that its magnetic Snap Cases are designed not to interfere with normal NFC functionality.

NFC-controlled features remain dependent on:

• iPhone hardware
• iOS
• Application support
• Accessory interference

If an unusual issue occurs, remove attached magnetic accessories and test again.

Drop Protection

MOFT’s current iPhone 18 Pro / Pro Max product page does not publish a specific drop-height rating for this exact Snap Case generation.

Therefore, this listing does not claim:

• 3-ft protection
• 6-ft protection
• 10-ft protection
• MIL-STD certification

unless that specification is printed on the exact retail packaging supplied.

This avoids applying a rating from an older MOFT Snap Case generation to the iPhone 18 version.

Protection Level

The case is intended to provide everyday protection against:

• Surface scratches
• Minor impacts
• Edge contact
• Everyday bumps
• Light drops

It should be regarded as a slim protective case rather than a heavy-duty rugged enclosure.

Protection Limitations

No phone case can guarantee protection against:

• Every drop
• Broken display glass
• Internal OLED damage
• Camera damage
• Rear-glass damage
• Bent frames
• Logic-board damage
• Battery damage
• Crushing
• Liquid ingress
• Fire
• Theft
• Loss

The case is a protective accessory, not device insurance.

Heat During Charging

MagSafe and wireless charging naturally generate heat.

The device may become warmer during:

• MagSafe charging
• Gaming
• Navigation
• Video recording
• Fast charging
• Software updates

The iPhone may automatically reduce charging speed if temperatures become too high.

Remove the case temporarily if:

• A temperature warning appears
• Charging repeatedly pauses
• The case becomes unusually hot
• The phone becomes abnormally hot

Water and Moisture Notice

The Snap Case is not a waterproof enclosure.

It does not seal:

• USB-C port
• Speakers
• Microphones
• Buttons
• Cameras
• Display perimeter

The case does not increase or restore the iPhone’s original water-resistance rating.

After moisture exposure:

1. Remove the case.
2. Dry the phone.
3. Dry the case separately.
4. Inspect all openings.
5. Reinstall only when everything is fully dry.

Installation Instructions

Before installation:

1. Confirm the correct iPhone model.
2. Remove the previous case.
3. Disconnect charging accessories.
4. Clean the phone.
5. Remove grit and dust.
6. Inspect the phone for damage.
7. Inspect any screen or camera protector.
8. Inspect the MOFT case.

To install:

1. Insert one side of the phone into the case.
2. Gently press the remaining corners into place.
3. Confirm the phone is fully seated.
4. Test the buttons.
5. Check USB-C access.
6. Confirm camera clearance.
7. Test MagSafe attachment.
8. Test wireless charging.
9. Confirm screen-protector clearance.

Do not force the case onto a bent or damaged device.

Removal Instructions

To remove:

1. Disconnect accessories.
2. Begin at a flexible corner.
3. Pull the edge gently away from the phone.
4. Release the remaining corners.
5. Lift the phone out carefully.

Avoid using:

• Knives
• Metal pry tools
• Screwdrivers
• Sharp picks

These can damage the case or phone.

Microfiber Interior Care

Dust or grit trapped between the microfiber lining and the iPhone can cause cosmetic marks over time.

Periodically:

1. Remove the case.
2. Wipe the phone.
3. Inspect the interior lining.
4. Remove debris.
5. Reinstall carefully.

Do not install the phone into a case containing sand or hard particles.

Product Condition

This listing is for a new MOFT Snap Case MOVAS™.

Inspect before use for:

• Cracks
• Warping
• Damaged lining
• Damaged magnets
• Incorrect fitment
• Packaging damage

Do not use a case that cannot securely retain the phone.

Packaging Variation

Packaging may vary according to:

• Production batch
• Region
• Retail channel
• Colour
• Packaging redesign
• Branding revision

Always verify the selected model and UPC.

UPC Reference

iPhone 18 Pro

• Product: MOFT Snap Case MOVAS™
• Compatibility: Apple iPhone 18 Pro
• Product family: MD020
• UPC: 840131331518

iPhone 18 Pro Max

• Product: MOFT Snap Case MOVAS™
• Compatibility: Apple iPhone 18 Pro Max
• Product family: MD020
• UPC: 840131331648

The UPC-to-model mapping above follows the product information supplied for this listing. MOFT’s current public product page independently confirms the model family and separate iPhone 18 Pro / Pro Max variants, but these two UPCs were not independently indexed in a sufficiently authoritative public source at the time this listing was prepared.

Important Notes

• Genuine MOFT Snap Case MOVAS™
• Compatible with iPhone 18 Pro or iPhone 18 Pro Max
• Separate model-specific sizes
• MOFT product family MD020
• iPhone 18 Pro UPC 840131331518
• iPhone 18 Pro Max UPC 840131331648
• MOVAS™ vegan leather exterior
• Polycarbonate structure
• Microfiber lining
• Integrated magnets
• MagSafe compatible
• Compatible with suitable MOFT Snap accessories
• Wireless charging compatible
• Slim and lightweight
• Approx. 28 g for iPhone 18 Pro
• Approx. 34 g for iPhone 18 Pro Max
• No specific drop-height rating is claimed unless confirmed on the exact packaging
• Phone is not included
• MagSafe charger is not included
• Magnetic accessories are not included
• No case can prevent every type of phone damage
• Covered by 3C-Easy Markham’s 90-Day Limited Accessory Warranty

3C-Easy Markham 90-Day Limited Accessory Warranty

This product is covered by 3C-Easy Markham’s 90-Day Limited Accessory Warranty from the original purchase date.

The warranty applies to qualifying manufacturing defects in the MOFT case purchased from 3C-Easy Markham.

Potential qualifying defects may include:

• Abnormal material separation
• Defective magnetic assembly
• Manufacturing-related shell failure
• Defective lining
• Incorrectly manufactured fitment
• Other confirmed manufacturing defects

Proof of purchase may be required.

Why the Warranty Is Provided by 3C-Easy Markham

MOFT publishes a separate limited manufacturer warranty for products purchased directly through:

• MOFT’s official website
• Kickstarter
• Indiegogo

MOFT’s published direct warranty terms state that purchases from authorized retailers and other third-party sales channels are not covered by that direct MOFT warranty program.

Because this item is purchased through 3C-Easy Markham rather than directly from MOFT, this listing uses 3C-Easy Markham’s 90-Day Limited Accessory Warranty instead of advertising MOFT’s direct-purchase warranty.

Warranty Exclusions

The 90-Day Limited Accessory Warranty does not cover:

• Normal wear
• Scratches
• Surface scuffs
• Colour changes from ordinary use
• Staining
• Damage caused by drops
• Cracked phone
• Broken display
• Camera damage
• Liquid damage
• Heat damage
• Misuse
• Abuse
• Modification
• Chemical damage
• Damage from incompatible accessories
• Lost or stolen products
• Damage to other devices
• Installation-related device damage

The warranty applies only to the eligible MOFT case.

Device Damage Is Not Covered

The case warranty does not constitute insurance for the iPhone.

It does not cover:

• Display repair
• Rear-glass repair
• Camera repair
• Frame repair
• Logic-board repair
• Data loss
• Device replacement
• Repair labour

Intellectual Property Disclaimer

MOFT, MOVAS™, Snap Case, Apple, iPhone, MagSafe, USB-C, and related product names, logos, technologies, and trademarks belong to their respective owners.

MagSafe is a trademark of Apple Inc.

3C-Easy Markham is not affiliated with, authorized by, sponsored by, or endorsed by MOFT Inc. or Apple Inc., except as an independent retailer where applicable.

All brand and model references are used solely to identify product compatibility and intended use.