UAG‘s Mouve Case w/MagSafe Compatible with Samsung Z Flip 8

UAG Mouve Case with MagSafe Compatibility for Samsung Galaxy Z Flip8 – Ash

Protect your Samsung Galaxy Z Flip8 while maintaining its slim folding design with the UAG Mouve Case with MagSafe Compatibility.

Engineered specifically for Samsung’s foldable Galaxy Z Flip8, the Mouve combines a rigid polycarbonate backplate with a flexible, impact-resistant TPU surround. Its precision-fit two-piece construction protects both halves of the phone while leaving the hinge open for unrestricted folding and unfolding.

An embedded magnetic module supports compatible MagSafe-style accessories, Qi wireless chargers, magnetic mounts, wallets, grips, and stands. Air-Soft corners help cushion common impacts, while raised protection around the screen and camera lenses reduces direct contact with flat surfaces.

The case meets MIL-STD-810G 516.6 military drop-test standards, providing dependable everyday protection without the bulk of a traditional heavy-duty foldable case.

Compatible Device: Samsung Galaxy Z Flip8
Series: UAG Mouve
Colour: Ash
Manufacturer SKU: 214561113131
UPC: 840283931611

Compatible Models

Designed specifically for:

• Samsung Galaxy Z Flip8

Always confirm the exact device model before purchase or installation. The model information can normally be found under:

Settings → About Phone → Model Name / Model Number

This case is designed around the Galaxy Z Flip8’s specific:

• Exterior dimensions
• Folding mechanism
• Cover display
• Camera arrangement
• Side-button placement
• Speaker and microphone locations
• USB-C charging port
• Wireless-charging coil position

It should not be assumed to fit:

• Samsung Galaxy Z Flip7
• Samsung Galaxy Z Flip7 FE
• Samsung Galaxy Z Flip6
• Samsung Galaxy Z Flip5
• Samsung Galaxy Z Fold8
• Samsung Galaxy Z Fold8 Ultra
• Other Samsung Galaxy phones

Foldable phones with similar appearances may still have different dimensions, camera positions, hinge clearances, and button layouts.

Package Contents

• 1 × UAG Mouve two-piece protective case
• Adhesive components pre-installed or included for secure attachment
• Colour: Ash

Samsung Galaxy Z Flip8, screen protectors, chargers, magnetic accessories, and other pictured items are not included.

Key Features

Precision Two-Piece Foldable Design

The Mouve uses a two-piece construction designed specifically for the upper and lower sections of the Samsung Galaxy Z Flip8.

Each section snaps around the corresponding half of the phone, allowing the device to open and close normally while maintaining protective coverage around the exterior frame.

The two-piece structure provides:

• Model-specific fit
• Full folding functionality
• Protection for both phone halves
• Access to the cover display
• Access to the side controls
• Access to the USB-C charging port
• Minimal interference with the phone’s folding motion

The upper and lower case sections are separate and should be installed in the correct orientation.

Open-Hinge Design

The case uses an open-hinge design, leaving the phone’s folding hinge exposed rather than covering it with an additional moving protective section.

This design helps preserve:

• Smooth folding and unfolding
• A slimmer overall profile
• Easier pocket storage
• Reduced hinge-area bulk
• Unrestricted use of the folding mechanism

The open-hinge design does not protect the hinge from every scratch, impact, or direct drop. Customers requiring full hinge coverage should choose a case specifically designed with an integrated hinge protector.

UAG identifies the open-hinge construction as part of the case’s precision-engineered two-piece design.

Adhesive-Assisted Secure Fit

The case includes adhesive to help bond the case sections securely to the phone.

Adhesive support is particularly important on a foldable phone because the upper and lower sections cannot wrap completely around the device in the same way as a traditional one-piece case.

The adhesive helps reduce:

• Case movement
• Sliding during folding
• Accidental separation
• Uneven alignment
• Loose-fitting case sections

For best adhesion:

• Clean and dry the phone before installation.
• Avoid touching the adhesive surface.
• Align each section before pressing it into place.
• Apply firm, even pressure after installation.
• Allow the adhesive time to establish a secure bond.
• Avoid repeated removal and reinstallation.

Adhesive performance may weaken after repeated removal, contamination, exposure to skin oils, heat, dust, or moisture.

Built-In Magnetic Module

The Mouve includes a magnetic module embedded within the polycarbonate structure.

This allows the case to attach to many compatible:

• MagSafe-style chargers
• Qi wireless chargers with magnetic alignment
• Magnetic vehicle mounts
• Magnetic wallets
• Magnetic grips
• Magnetic stands
• Magnetic battery packs
• Other compatible magnetic accessories

Because the magnetic component is built into the case, a separate adhesive magnetic ring is not normally required.

UAG states that the embedded module supports MagSafe, Qi wireless charging, magnetic accessories, and compatible payment functions.

MagSafe-Accessory Compatibility

MagSafe is an Apple-developed magnetic accessory system. This UAG case uses a compatible magnetic arrangement so supported MagSafe-style accessories can attach to the Samsung Galaxy Z Flip8.

Magnetic compatibility does not mean that the phone becomes an Apple MagSafe device. Accessory performance depends on:

• Accessory design
• Magnetic strength
• Alignment
• Wireless-charging standard
• Charger output
• Phone software
• Device temperature
• Accessory weight
• Installation position

Some accessories may attach magnetically but not provide their maximum charging speed or full intended functionality.

Qi Wireless-Charging Compatibility

The case is designed to work with compatible Qi wireless chargers.

Wireless charging requires:

• A Samsung Galaxy Z Flip8 that supports wireless charging
• A compatible Qi charger
• A suitable power adapter
• Correct phone and charger alignment
• A properly installed case
• Supported charging conditions

The magnetic module helps with compatible accessory alignment, but it does not independently generate charging power.

Actual wireless-charging performance may vary according to the charger, phone temperature, battery level, power source, software, and connected accessories.

Magnetic Payment Support

UAG lists the case as supporting payment functionality.

Contactless payment depends on:

• The Samsung phone’s NFC hardware
• Samsung Wallet or another supported payment application
• The payment terminal
• Bank and card compatibility
• Phone settings
• Local service availability

A thick accessory, magnetic wallet, metal plate, or other item attached to the rear of the case may need to be removed if it interferes with NFC communication.

MIL-STD-810G 516.6 Drop-Test Compliance

The Mouve meets MIL-STD-810G 516.6 military drop-test standards.

This testing standard evaluates a case’s ability to help protect a compatible device during repeated controlled drops under specified laboratory conditions. UAG identifies the Mouve as providing increased shock protection under this standard.

Military-standard compliance does not make the phone indestructible and does not guarantee protection from every accident.

Damage may still occur depending on:

• Drop height
• Impact angle
• Surface hardness
• Whether the hinge is struck
• Whether the phone is open or folded
• Existing phone damage
• Repeated impacts
• Installation quality
• Case condition
• Environmental temperature

Foldable phones contain moving components and flexible display layers that may remain vulnerable even when the exterior is protected.

Impact-Resistant Soft Core

The TPU surround creates a flexible, impact-resistant layer around the compatible areas of the phone.

This soft core helps:

• Absorb minor shock
• Cushion common bumps
• Protect exposed exterior edges
• Reduce direct frame contact
• Improve everyday grip

UAG identifies the Mouve as having an impact-resistant soft core.

Air-Soft Corner Protection

The corners incorporate UAG’s Air-Soft cushioning design.

Phone corners frequently absorb concentrated impact energy during a drop. The Air-Soft structure helps create additional cushioning around these vulnerable areas.

This feature is intended to reduce the amount of impact transferred directly to the device, although it cannot prevent all frame, display, hinge, camera, or internal damage.

Polycarbonate Backplate

The case uses a lightweight polycarbonate backplate.

Polycarbonate provides:

• Structural rigidity
• Resistance to everyday impacts
• Protection against surface contact
• Support for the embedded magnetic module
• Reduced flex across the rear of the case

The Ash finish provides a clean, understated appearance while maintaining the lightweight character of the Mouve series.

Polycarbonate is durable but may still develop scratches, scuffs, discolouration, or cosmetic wear with regular use.

TPU Surround Frame

The flexible TPU frame wraps around the exterior edges of the compatible phone sections.

TPU provides:

• Shock absorption
• Flexibility during installation
• Edge protection
• Improved handling
• Resistance to minor bumps
• Secure fit around the phone

TPU may gradually show wear, stretching, staining, or material ageing after prolonged exposure to heat, ultraviolet light, skin oils, chemicals, or repeated removal.

Tactile Side Grip

The sides feature a textured grip surface designed to reduce slipping during normal use.

The grip texture may help when:

• Opening or closing the phone
• Holding the phone one-handed
• Taking photographs
• Using the cover display
• Removing the phone from a pocket
• Handling the device with dry hands

UAG describes the side texture as providing secure, no-slip handling.

No grip surface can prevent every accidental drop, particularly when the case is wet, oily, dusty, or contaminated.

Raised Screen Surround

The case includes a raised perimeter around the compatible screen areas.

When the phone is placed on a smooth, flat surface, this elevated edge helps reduce direct contact between the display and the surface underneath.

Protection remains limited when:

• The phone lands on an uneven object
• The impact strikes the screen directly
• The screen is already damaged
• The case is incorrectly installed
• The phone is dropped while open
• A sharp object contacts the display

A compatible screen protector is recommended for additional surface protection.

Raised Camera Bezel

A raised bezel surrounds the rear camera area to help reduce direct contact with desks, tables, counters, and other flat surfaces.

This can help protect the camera lens covers from:

• Surface scratches
• Minor abrasion
• Dust on flat surfaces
• Routine placement wear

The camera area may still be damaged by pointed objects, direct impacts, sand, metal fragments, or uneven surfaces.

Featherlight Construction

The Mouve is designed to provide impact protection while minimizing unnecessary weight and bulk.

Its lightweight PC and TPU construction helps preserve:

• Comfortable handheld use
• Pocket-friendly portability
• Normal folding operation
• Easy access to the cover display
• The compact nature of the Galaxy Z Flip8

UAG describes the case as featherlight while retaining durable impact resistance.

Clean Matte Ash Finish

The Ash colour provides a neutral, modern appearance with a clean matte finish.

The finish may help reduce the visibility of some fingerprints and minor marks compared with a fully glossy surface.

However, matte materials may still show:

• Skin oils
• Dust
• Makeup
• Fabric dye
• Scuffs
• Surface wear
• Cleaning residue

Appearance may vary slightly depending on lighting, display settings, production batch, and surrounding colours.

Cover-Screen Accessibility

The case is designed to maintain access to the Samsung Galaxy Z Flip8 cover display.

The cover screen can be used for supported functions such as:

• Notifications
• Calls
• Messages
• Camera previews
• Music controls
• Widgets
• Quick settings
• Other supported applications

The case does not include a built-in cover-screen protector unless specifically stated on the retail package.

A separate compatible cover-screen protector may be installed when it does not interfere with case fit.

Foldable Display Notice

The Samsung Galaxy Z Flip8 uses a flexible internal display.

This case does not include a protector for the inner folding screen and does not prevent:

• Crease development
• Pressure damage
• Punctures
• Internal OLED failure
• Damage from closing the phone around debris
• Fingernail marks
• Damage caused by removing the factory-installed film
• Damage caused by incompatible screen protectors

Do not install a rigid tempered-glass protector over the internal folding display.

Follow Samsung’s instructions regarding the factory-installed inner screen protector.

Hinge-Protection Limitation

The case uses an open-hinge design and therefore does not fully cover the exposed hinge.

The hinge may remain vulnerable to:

• Direct impacts
• Surface scratching
• Sand and dust
• Metal fragments
• Debris
• Cosmetic wear
• Damage during open-position drops

This design prioritizes a slim profile and unrestricted folding movement over full hinge enclosure.

Screen-Protector Compatibility

The case may be compatible with properly sized, case-friendly protectors for the exterior cover screen.

Compatibility can vary with:

• Edge-to-edge glass
• Extra-thick protectors
• Privacy protectors
• Off-centre installations
• Protectors extending too close to the case edge
• Adhesive thickness

An incompatible screen protector may lift when the case is installed.

Do not install unauthorized rigid glass on the inner foldable display.

Camera-Lens Protector Compatibility

Separate camera-lens protectors may fit when they remain within the case’s raised camera opening.

Compatibility is not guaranteed with:

• Oversized lens protectors
• One-piece camera-island covers
• Thick metal lens rings
• Decorative protectors
• Off-centre installations

An incompatible protector may prevent the case from sitting evenly or may create pressure around the camera assembly.

Magnetic Accessory Guidance

Magnetic Chargers

For best results:

1. Centre the charger over the case’s magnetic ring.
2. Confirm that charging begins.
3. Use a suitable power adapter and cable.
4. Remove thick wallets or accessories before charging.
5. Stop charging if excessive heat develops.

Magnetic Wallets

A magnetic wallet may attach to the case, but:

• Attachment strength varies.
• Excessive cards may weaken the connection.
• Wireless charging usually requires wallet removal.
• Magnetic-stripe cards may be affected by prolonged magnet exposure.
• NFC and payment performance may vary.

Magnetic Vehicle Mounts

Before driving:

1. Attach the phone while the vehicle is stationary.
2. Confirm that the mount holds the folded phone securely.
3. Position the mount outside airbag deployment zones.
4. Ensure that it does not obstruct the driver’s view.
5. Avoid adjusting the phone while driving.

Rough roads, sudden movement, extreme heat, or a weak magnetic mount may cause detachment.

Magnetic Battery Packs

Compatible magnetic battery packs may attach to the case, but fit can vary because of the Galaxy Z Flip8’s folding shape and camera position.

Confirm that the battery pack:

• Sits flat
• Does not interfere with the hinge
• Does not cover the camera
• Aligns correctly with the charging coil
• Does not cause excessive heat

Installation Preparation

Before installation:

1. Confirm that the device is a Samsung Galaxy Z Flip8.
2. Remove any previous case.
3. Disconnect charging cables and accessories.
4. Clean the phone’s exterior.
5. Remove dust, oil, and moisture.
6. Confirm the correct orientation of both case sections.
7. Review the included installation instructions.
8. Avoid touching exposed adhesive unnecessarily.

Do not install the case over a wet, dirty, damaged, or swollen phone.

Installation Instructions

1. Keep the Galaxy Z Flip8 partially folded or positioned according to UAG’s supplied instructions.
2. Identify the upper and lower case sections.
3. Remove any protective liner from the adhesive areas.
4. Align the upper section around the cover display and camera area.
5. Press it gently and evenly into place.
6. Align the lower section with the USB-C port and phone frame.
7. Press the lower section securely into place.
8. Apply even pressure over the adhesive areas.
9. Open and close the phone slowly.
10. Confirm that neither case section shifts.
11. Check that the buttons, microphones, speakers, cameras, and charging port remain accessible.
12. Test wireless charging and magnetic accessories separately.

Do not force the case onto the phone when the pieces are misaligned.

Removal Instructions

Adhesive-assisted foldable cases should be removed carefully.

1. Disconnect all chargers and magnetic accessories.
2. Turn off the phone.
3. Work over a clean, padded surface.
4. Slowly release one case section from an exterior edge.
5. Avoid inserting metal tools between the phone and case.
6. Do not pull sharply near the hinge or display.
7. Remove the second section carefully.
8. Clean away any remaining adhesive residue using a device-safe method.

Repeated removal may reduce adhesive strength. Replacement adhesive may be required before reinstalling the case.

Cleaning and Care

To clean the case:

1. Remove the case carefully from the phone.
2. Wipe away loose dust and debris.
3. Use a soft, slightly damp microfiber cloth.
4. Apply a small amount of mild soap when necessary.
5. Avoid saturating the adhesive areas.
6. Dry the case completely before installation.

Do not use:

• Bleach
• Acetone
• Paint thinner
• Strong solvents
• Abrasive powders
• Scouring pads
• Metal brushes
• Dishwashers
• Washing machines
• Hair dryers
• Open flames
• Excessive heat

Strong chemicals may weaken the case, damage its finish, affect the magnets, or reduce adhesive performance.

Preventing Trapped Debris

Dust, sand, and fine particles can collect between the phone and case.

Inspect and clean the case periodically, especially after exposure to:

• Beaches
• Workshops
• Construction environments
• Outdoor activities
• Dusty pockets or bags
• Food spills
• Metal particles

Debris trapped beneath the case may scratch the phone’s exterior.

Device Heat and Wireless Charging

Some warmth during wireless charging, gaming, navigation, software updates, video recording, or demanding applications is normal.

Wireless charging can generate more heat than wired charging.

Remove the charger and discontinue use when:

• The phone becomes unusually hot
• Charging repeatedly stops and restarts
• The case begins to deform
• The phone displays temperature warnings
• A burning smell develops
• The battery appears swollen
• The phone housing begins to separate

A swollen or damaged battery requires professional inspection. Do not use the case to force a separating phone back together.

Important Protection Limitations

• Meets MIL-STD-810G 516.6 drop-test standards, but device survival is not guaranteed.
• Does not fully protect the exposed hinge.
• Does not include an inner-display protector.
• Does not prevent every scratch, crack, dent, or impact.
• Does not protect against severe bending or crushing.
• Is not waterproof.
• Is not a sealed dustproof enclosure.
• Does not restore the phone’s original water-resistance rating.
• Does not repair existing phone damage.
• Does not protect data stored on the phone.
• Magnetic compatibility does not guarantee compatibility with every accessory.
• Wireless-charging speed depends on the complete charging setup.
• Adhesive may weaken after repeated removal.
• Magnetic accessories and charger are not included.

A protective case reduces certain risks but cannot eliminate them.

Product Quality Notes

This is a genuine UAG Mouve Series case, not an unbranded or generic magnetic cover.

UAG specifies the following features for this Galaxy Z Flip8 model:

• Lightweight polycarbonate backplate
• Shock-absorbing TPU surround
• Air-Soft corner cushioning
• Tactile side grip
• Raised screen protection
• Raised camera bezel
• Open-hinge construction
• Two-piece precision fit
• Adhesive-assisted installation
• Built-in magnetic module
• MagSafe-style accessory compatibility
• Qi wireless-charging compatibility
• MIL-STD-810G 516.6 drop-test compliance

Packaging, finish texture, adhesive presentation, printed graphics, and minor construction details may vary by production batch without affecting the case’s intended compatibility.

Warranty

This product is covered by the applicable UAG limited manufacturer warranty, subject to UAG’s current warranty period, authorized-reseller requirements, proof-of-purchase requirements, regional policies, exclusions, and claim procedures.

UAG’s warranty generally covers qualifying defects in materials or workmanship under normal use. Warranty requirements may include proof of purchase, photographs of the product, and identification of the affected model.

Warranty coverage does not normally apply to:

• Damage to the Samsung phone
• Normal wear and ageing
• Cosmetic scratches or scuffs
• Accidental drops or impacts
• Improper installation
• Adhesive contamination or weakening
• Repeated removal and reinstallation
• Modification of the case
• Misuse or abuse
• Heat or liquid damage
• Damage caused by incompatible accessories
• Loss or theft
• Products purchased through unauthorized sellers

The warranty applies to the UAG case and does not insure or replace the connected smartphone, charger, wallet, mount, or other accessory.

Please retain the original receipt and packaging.

Intellectual Property Disclaimer

UAG, Urban Armor Gear, Mouve, Air-Soft, Samsung, Galaxy, MagSafe, Qi, Samsung Wallet, and all related names, logos, designs, and trademarks are the property of their respective owners.

2718240 Ontario Inc. O/A 3C-Easy Markham is an independent retailer and is not affiliated with, sponsored by, authorized by, or endorsed by Samsung Electronics, Apple Inc., Urban Armor Gear, or the Wireless Power Consortium unless expressly stated.

Samsung Galaxy, MagSafe, and Qi references are used solely to identify device and accessory compatibility.

Product Specifications

• Brand: UAG / Urban Armor Gear
• Product series: Mouve
• Product type: Two-piece magnetic protective case
• Compatible device: Samsung Galaxy Z Flip8
• Manufacturer SKU: 214561113131
• Colour: Ash
• Construction: Polycarbonate backplate with TPU surround
• Built-in magnetic module: Yes
• MagSafe-style accessory compatible: Yes
• Qi wireless-charging compatible: Yes
• Magnetic payment support: Yes
• Open-hinge design: Yes
• Full hinge coverage: No
• Air-Soft corner cushioning: Yes
• Impact-resistant soft core: Yes
• Tactile side grip: Yes
• Raised screen surround: Yes
• Raised camera bezel: Yes
• Adhesive-assisted installation: Yes
• Military drop-test standard: MIL-STD-810G 516.6
• Built-in inner-screen protector: No
• Built-in cover-screen protector: No
• Built-in stand: No
• Waterproof: No
• Condition: New retail product
• UPC: 840283931611