Blu Element Tempered Glass Screen Protector for Samsung Galaxy S26 FE
Protect the display of your Samsung Galaxy S26 FE with the Blu Element Tempered Glass Screen Protector, designed to provide strong everyday scratch and impact protection while maintaining clear display quality and responsive touchscreen performance.
Blu Element uses premium optical-grade tempered glass with a 9H surface-hardness rating, combined with an anti-scratch surface, fingerprint- and smudge-resistant treatment, and premium silicone adhesive designed for smooth, bubble-free application.
Blu Element rates this protector at 2X stronger screen protection compared with an unprotected display.
The protector is designed around the Samsung Galaxy S26 FE’s 6.7-inch Dynamic AMOLED 2X display while preserving normal touch interaction and high-refresh-rate operation.
UPC: 732442249524
Blu Element Model: BESPS25FE
Distributor SKU: 118-2967
Compatible Models
This Blu Element protector is officially listed as compatible with:
- Samsung Galaxy S26 FE
- Samsung Galaxy S25 FE
- Samsung Galaxy A57 5G
This listing is primarily marketed for the Samsung Galaxy S26 FE.
Because Blu Element uses the same protector across these compatible devices, product packaging may reference one or more of the earlier compatible models.
Samsung Galaxy S26 FE Compatibility
Compatible with the Samsung Galaxy S26 FE, including the Canadian model family:
Samsung specifies the Galaxy S26 FE with:
- 6.7-inch display
- Dynamic AMOLED 2X technology
- 1080 × 2340 FHD+ resolution
- Up to 120Hz refresh rate
The screen protector is designed to preserve normal use of these display features.
Not Compatible With
This protector should not be used with:
- Samsung Galaxy S26
- Samsung Galaxy S26+
- Samsung Galaxy S26 Ultra
- Samsung Galaxy S25
- Samsung Galaxy S25+
- Samsung Galaxy S25 Ultra
- Samsung Galaxy A56 5G
- Samsung Galaxy Z Fold series
- Samsung Galaxy Z Flip series
- Other Samsung models
Always confirm the exact device before installation.
Product Identification
- Brand: Blu Element
- Product type: Tempered Glass Screen Protector
- Model: BESPS25FE
- Distributor SKU: 118-2967
- UPC: 732442249524
- Primary compatibility: Samsung Galaxy S26 FE
- Additional compatibility: Galaxy S25 FE / Galaxy A57 5G
- Material: Premium optical-grade tempered glass
- Surface hardness: 9H
- Protection claim: 2X stronger than an unprotected screen
- Touch response: Responsive-touch design
- Surface treatment: Fingerprint and smudge resistant
- Adhesive: Premium silicone adhesive
- Packaging: Recyclable
- Warranty: Blu Element Limited Lifetime Warranty
Key Features
- Genuine Blu Element screen protector
- Compatible with Samsung Galaxy S26 FE
- Also fits Galaxy S25 FE and Galaxy A57 5G
- 9H surface hardness
- 2X stronger screen protection compared with an unprotected display
- Premium optical-grade glass
- Ultra High Definition clarity
- Responsive touchscreen performance
- Fingerprint- and smudge-resistant surface
- Anti-scratch treatment
- Premium silicone adhesive
- Designed for bubble-free application
- Designed for clean removal without unwanted adhesive residue
- Case-friendly protective coverage
- Compatible with normal 120Hz display operation
- Recyclable packaging
- Blu Element Limited Lifetime Warranty
2X Stronger Screen Protection
Blu Element describes this tempered glass as providing 2X stronger screen protection compared with an unprotected screen.
The additional glass layer helps protect against common everyday hazards such as:
- Scratches
- Scuffs
- Pocket debris
- Keys
- Coins
- Light impacts
- Accidental surface contact
The protector functions as a sacrificial layer above the original Samsung display.
The 2X claim does not mean:
- The phone cannot break
- Every drop is survivable
- The display becomes indestructible
- The protector cannot crack
- Device damage is guaranteed to be prevented
Real-world protection depends on the impact.
9H Surface Hardness
Blu Element specifies a 9H surface-hardness rating.
The hardened surface helps resist many ordinary sources of scratching.
This may include contact with:
- Keys
- Coins
- Zippers
- Desk surfaces
- Bag contents
- General pocket debris
A 9H rating does not mean scratch-proof.
Very hard or abrasive materials may still cause marks, including:
- Sand
- Quartz particles
- Ceramic material
- Masonry dust
- Construction debris
- Sharp tools
Premium Optical-Grade Glass
Blu Element uses premium optical-grade glass designed to preserve the quality of the underlying Samsung display.
The protector is intended to maintain:
- Screen clarity
- Text sharpness
- Colour reproduction
- Image detail
- Video quality
- Gaming visuals
- General outdoor readability
Blu Element describes the glass as providing Ultra High Definition viewing quality.
This refers to optical transparency and does not increase the phone’s actual display resolution.
Galaxy S26 FE 120Hz Display Compatibility
The Samsung Galaxy S26 FE supports a refresh rate of up to 120Hz.
The protector is a passive physical layer and does not alter the phone’s electronic refresh rate.
When properly installed, normal functions such as:
- Smooth scrolling
- Gaming
- Animations
- Gesture navigation
- Touch response
should continue to operate normally.
Refresh behaviour remains controlled by the phone, Android software, and individual applications.
Responsive Touch
Blu Element specifically lists responsive touch as a product feature.
The thin glass construction is designed to preserve normal touchscreen interaction.
After installation, test:
- Tapping
- Swiping
- Scrolling
- Typing
- Pinch-to-zoom
- Long presses
- Multi-touch gestures
- Gaming controls
- Edge gestures
Touch behaviour can still be affected by:
- Incorrect installation
- Dust beneath the protector
- Air gaps
- Display damage
- Replacement-screen quality
- Software problems
- Case interference
Fingerprint Sensor Considerations
The Samsung Galaxy S26 FE includes a fingerprint sensor.
A screen protector adds a physical layer over the display, so fingerprint recognition may occasionally require adjustment after installation.
For best results:
- Install the protector carefully.
- Make sure there are no bubbles or dust around the fingerprint-sensing area.
- Clean the protector surface.
- Re-register fingerprints if recognition becomes less consistent.
- Follow Samsung’s fingerprint setup instructions carefully.
Fingerprint performance may also depend on:
- Finger condition
- Moisture
- Dry skin
- Surface cleanliness
- Software
- Existing display damage
- Replacement-screen quality
No screen protector can guarantee identical biometric performance in every condition.
Fingerprint and Smudge Resistance
Blu Element applies a surface treatment intended to reduce visible:
- Fingerprints
- Skin oils
- Smudges
- Swipe marks
The coating helps make the protector easier to keep clean.
It does not make the surface completely fingerprint-proof.
Regular cleaning is still recommended.
Anti-Scratch Surface
The protector’s surface is designed to reduce everyday marks and scratches.
This helps keep the original Samsung display isolated from direct contact.
The protector itself may develop cosmetic wear over time.
Normal wear should be expected on any sacrificial screen-protection layer.
Premium Silicone Adhesive
Blu Element uses premium silicone adhesive designed to provide even attachment across the screen.
The adhesive is intended to support:
- Smooth installation
- Consistent optical clarity
- Secure attachment
- Reduced bubble formation
- Clean removal
Blu Element states that the protector can be removed without leaving unwanted residue under normal conditions.
Bubble-Free Installation
Blu Element describes the adhesive system as designed for bubble-free application.
Successful installation still depends on proper preparation.
Bubbles may occur because of:
- Dust
- Hair
- Lint
- Fingerprints
- Oil
- Moisture
- Incorrect alignment
- Existing screen damage
Air-only bubbles may sometimes disappear or be moved toward an edge.
Bubbles caused by trapped debris normally require removal or repositioning.
Installation Preparation
Before installation:
- Confirm the phone is a compatible model.
- Remove the protective case.
- Wash and dry your hands.
- Place the phone on a clean surface.
- Clean the display thoroughly.
- Remove fingerprints and oils.
- Remove every visible dust particle.
- Inspect the screen for cracks or damage.
- Confirm the frame is not bent.
- Follow the included Blu Element installation instructions.
Install in a clean, low-dust environment.
Typical Installation Procedure
Follow the instructions provided with the product.
A typical installation involves:
- Remove the phone case.
- Clean the screen.
- Dry with a microfiber cloth.
- Remove remaining dust.
- Peel away the protector backing.
- Avoid touching the adhesive.
- Align the protector carefully.
- Lower it onto the display.
- Allow the silicone adhesive to spread.
- Push remaining air toward the nearest edge.
- Inspect alignment.
- Test touchscreen operation.
- Test fingerprint recognition.
- Reinstall the case.
Installation Kit
Blu Element identifies this product as easy to install and may include installation or cleaning accessories depending on the packaging revision.
Possible included materials may include:
- Cleaning wipe
- Microfiber cloth
- Dust-removal sticker
- Installation instructions
Exact package contents should be confirmed from the retail package supplied.
Case-Friendly Design
The protector is designed to work with many properly fitted protective cases.
A small perimeter clearance may remain around the glass.
This can help prevent a case from pressing against the protector.
Compatibility cannot be guaranteed with every case.
Very tight cases may cause:
- Edge lifting
- Air bubbles
- Adhesive separation
- Chipping
Compatibility With Replacement Screens
The protector is primarily designed around the dimensions of the original Samsung display.
Aftermarket or refurbished screens may vary slightly in:
- Bezel width
- Glass dimensions
- Surface curvature
- Installed height
- Surface coating
These differences may affect:
- Adhesion
- Edge clearance
- Fingerprint performance
- Bubble formation
- Case compatibility
Compatibility with every replacement display cannot be guaranteed.
Tempered Glass Breakage
Tempered glass is designed to be a replaceable protective layer.
During a sufficiently strong impact, it may:
- Crack
- Chip
- Fracture
- Shatter
This does not necessarily indicate a manufacturing defect.
A broken protector should be replaced promptly.
Protector breakage also does not guarantee that the original Samsung display remains undamaged.
Protector Removal
To remove:
- Remove the protective case.
- Begin at an accessible corner.
- Lift gently using a fingernail or suitable plastic tool.
- Slowly separate the adhesive.
- Keep cracked glass controlled.
- Clean the display afterward.
Avoid:
- Razor blades
- Knives
- Metal screwdrivers
- Sharp picks
These may scratch or damage the original display.
Cleaning and Maintenance
Clean the protector using:
- Soft microfiber cloth
- Screen-safe cleaner
- Lightly dampened lint-free cloth
Avoid:
- Abrasive pads
- Strong solvents
- Bleach
- Acetone
- Rough paper towels
- Sharp objects
- Excessive liquid
Regular cleaning helps maintain optical clarity and fingerprint performance.
Water and Moisture Notice
This screen protector does not waterproof the Samsung Galaxy S26 FE.
It does not seal:
- Display perimeter
- USB-C port
- Speakers
- Microphones
- Buttons
- Internal components
It also does not restore water resistance lost through previous repair or physical damage.
Recyclable Packaging
Blu Element identifies the packaging as recyclable.
Recycling acceptance depends on local municipal requirements.
Separate different packaging materials where required.
Product Condition
This listing is for a new Blu Element Tempered Glass Screen Protector.
Inspect before installation for:
- Cracks
- Chips
- Adhesive contamination
- Incorrect dimensions
- Packaging damage
Do not install a visibly damaged protector.
Packaging Variation
Because this protector is compatible across several Samsung devices, packaging may identify:
- Galaxy S26 FE
- Galaxy S25 FE
- Galaxy A57 5G
- Multiple compatible models together
This does not necessarily mean the incorrect protector was supplied.
Confirm:
- Model: BESPS25FE
- Distributor SKU: 118-2967
- UPC: 732442249524
Important Notes
- Genuine Blu Element tempered-glass protector
- Compatible with Galaxy S26 FE
- Also compatible with Galaxy S25 FE and Galaxy A57 5G
- UPC 732442249524
- Blu Element model BESPS25FE
- Distributor SKU 118-2967
- Premium optical-grade tempered glass
- 9H surface hardness
- 2X stronger protection compared with an unprotected screen
- Responsive touch
- Fingerprint- and smudge-resistant surface
- Premium silicone adhesive
- Designed for bubble-free installation
- Designed for clean removal
- Compatible with normal 120Hz display operation
- Fingerprint re-registration may improve recognition after installation
- Recyclable packaging
- Phone and protective case are not included
- No screen protector can prevent every form of display damage
- Blu Element Limited Lifetime Warranty
Blu Element Limited Lifetime Warranty
Blu Element states that its cases and screen protectors are covered by a Limited Lifetime Warranty.
This warranty is provided by Blu Element and is separate from 3C-Easy Markham’s standard accessory warranty.
Warranty coverage applies to the eligible Blu Element product itself and remains subject to the manufacturer’s current terms and claim requirements.
Customers should retain:
- Original proof of purchase
- Product information
- UPC 732442249524
- Device compatibility information
Blu Element determines final warranty eligibility.
Warranty Limitations
Manufacturer warranty coverage does not constitute insurance for the Samsung phone.
It does not automatically cover:
- Broken Samsung display
- Internal AMOLED damage
- Device repair costs
- Data loss
- Frame damage
- Camera damage
- Logic-board damage
- Liquid damage to the phone
- Device replacement
- Installation labour
- Removal labour
Normal wear, installation-related problems, accidental impact damage, misuse, or other exclusions may also be subject to Blu Element’s current warranty terms.
Intellectual Property Disclaimer
Blu Element, Samsung, Galaxy, Galaxy S, Galaxy S26 FE, Galaxy S25 FE, Galaxy A57 5G, Dynamic AMOLED, and related product names, logos, technologies, and trademarks belong to their respective owners.
3C-Easy Markham is not affiliated with, authorized by, sponsored by, or endorsed by Blu Element or Samsung Electronics.
All brand and model references are used solely to identify product compatibility and intended use.
files/118-2967-BluElement-BESPS25FE-1.avif
files/118-2967-BluElement-BESPS25FE-2.avif
files/118-2967-BluElement-BESPS25FE-6.avif
files/118-2967-BluElement-BESPS25FE-5.avif
files/118-2967-BluElement-BESPS25FE-4.avif
