Replacement Housing for Apple iPhone 13 Mini, 13, 13 Pro, and 13 Pro Max

Replacement Housing with Miscellaneous Parts Pre-Installed for Apple iPhone 13 Series

Restore the exterior structure, rear-glass appearance, and internal component mounting points of a compatible Apple iPhone 13-series device with this replacement housing assembly featuring selected miscellaneous parts pre-installed.

This listing includes replacement housing options for:

• Apple iPhone 13 Mini
• Apple iPhone 13
• Apple iPhone 13 Pro
• Apple iPhone 13 Pro Max

A replacement housing may be suitable when the original rear glass, metal frame, camera surround, button openings, internal mounting points, or structural body has been severely damaged.

Selected miscellaneous parts are pre-installed to reduce the number of cosmetic pieces, brackets, and small components that must be transferred individually. However, this is not a complete phone assembly. Most major functional components must still be transferred from the original device.

Each iPhone 13-series model uses a different housing size, camera opening, internal layout, antenna configuration, component mounting design, and rear-glass finish. Select the exact device model, colour, and regional configuration before ordering.

Compatible Models

Apple iPhone 13 Mini

• A2481
• A2626
• A2628
• A2629
• A2630

Apple iPhone 13

• A2482
• A2631
• A2633
• A2634
• A2635

Apple iPhone 13 Pro

• A2483
• A2636
• A2638
• A2639
• A2640

Apple iPhone 13 Pro Max

• A2484
• A2641
• A2643
• A2644
• A2645

Please confirm the complete model number before ordering.

The model number can normally be checked under:

Settings > General > About > Model Number

Tap the displayed part number where necessary to reveal the A-number.

When the phone cannot be turned on, confirm the model through the original packaging, purchase documentation, device dimensions, camera layout, or internal component arrangement.

Regional models may differ in cellular antenna configurations, mmWave hardware, SIM arrangements, frame openings, internal brackets, flex cables, and mounting points.

Available Options

• Replacement housing for Apple iPhone 13 Mini
• Replacement housing for Apple iPhone 13
• Replacement housing for Apple iPhone 13 Pro
• Replacement housing for Apple iPhone 13 Pro Max

Colour availability varies by model and production batch.

Possible iPhone 13 Mini and iPhone 13 Colours

• Midnight
• Starlight
• Blue
• Pink
• Green
• Red
• Other compatible finishes where available

Possible iPhone 13 Pro and iPhone 13 Pro Max Colours

• Graphite
• Silver
• Gold
• Sierra Blue
• Alpine Green
• Other compatible finishes where available

Select the exact model and colour before ordering.

Frame shade, rear-glass colour, camera-ring finish, antenna-line colour, button colour, and surface texture may differ slightly from the original device or product photographs.

Miscellaneous Parts Pre-Installed

The housing includes selected miscellaneous components pre-installed to simplify the transfer process.

Depending on the model, colour, supplier, regional configuration, and production batch, pre-installed parts may include some of the following:

• Physical side button
• Volume buttons
• Ring/Silent switch hardware
• Side-button brackets
• Volume-button brackets
• Ring/Silent switch brackets
• Camera lens covers
• Camera lens rings
• Camera support brackets
• SIM-tray components
• Speaker or microphone meshes
• Internal grounding contacts
• Antenna contact pieces
• Small metal brackets
• Flex-cable retaining pieces
• Foam pads
• Dust meshes
• Protective films
• Adhesive elements
• Other minor structural or cosmetic components

The exact included parts may vary.

Do not assume that every component shown in product photographs is included or pre-installed. Compare the received replacement housing carefully with the original device before beginning installation.

Major functional components are not included unless specifically stated.

Components Normally Requiring Transfer

Most internal components must be transferred from the original iPhone.

These may include:

• Logic board
• Battery
• Display assembly
• Face ID and front-sensor components
• Front-facing camera
• Rear-camera assemblies
• LiDAR scanner on iPhone 13 Pro and 13 Pro Max
• Charging-port assembly
• Loudspeaker
• Earpiece speaker
• Taptic Engine
• Wireless-charging coil
• MagSafe magnet assembly where not included
• NFC-related components
• Side-button flex cable
• Volume and Ring/Silent switch flex cable
• Cellular antennas
• Wi-Fi and Bluetooth antennas
• mmWave antenna hardware on applicable models
• SIM-card hardware
• Microphones
• Thermal pads
• Logic-board shields
• Brackets
• Screws
• Gaskets
• Adhesive
• Other model-specific components

The exact transfer requirements depend on which miscellaneous parts arrive pre-installed in the selected housing.

Key Features

• Replacement rear housing and middle-frame assembly
• Available for Apple iPhone 13 Mini, 13, 13 Pro, and 13 Pro Max
• Selected miscellaneous parts pre-installed
• Designed to replace damaged rear glass and structural frame components
• Model-specific internal geometry and camera openings
• Available in compatible model colours where stocked
• May reduce the number of cosmetic parts and small brackets requiring transfer
• Suitable for devices with severely cracked or missing rear glass
• Suitable for dented, bent, or cosmetically damaged housings
• Designed to restore internal component mounting positions
• Designed to restore the general exterior appearance of the device
• Extensive internal-component transfer required
• Professional installation strongly recommended

Common Housing-Damage Symptoms

Housing replacement may be appropriate when the iPhone has:

• Cracked or shattered rear glass
• Missing sections of rear glass
• Sharp or exposed glass edges
• Severe cosmetic rear-panel damage
• A bent or twisted metal frame
• Dented corners
• Damaged camera lens rings
• Broken camera lens covers
• Misaligned camera openings
• Damaged button openings
• Loose or missing physical buttons
• A damaged SIM-tray opening
• Broken internal mounting points
• Damaged screw posts
• Poor display fitment caused by frame distortion
• Gaps around the display
• Damage preventing the back components from seating correctly
• Corrosion or residue affecting the original housing
• Damage caused by impact, crushing, pressure, or previous repair attempts
• Structural damage that cannot be corrected through rear-glass replacement alone

Housing replacement will not correct problems caused by:

• Logic-board damage
• Cellular or baseband faults
• Face ID failure
• Camera failure
• Battery failure
• Charging-port failure
• Display failure
• Liquid corrosion affecting transferred components
• Damaged antennas
• Software or iOS problems
• Another defective internal component

Proper diagnosis is recommended before transferring the original components into the replacement housing.

Housing Quality Notes

This is a replacement housing assembly and may use a combination of aftermarket and refurbished components.

Depending on the selected option and production batch, differences from the original Apple housing may be present in:

• Rear-glass colour
• Frame colour
• Surface texture
• Gloss or matte finish
• Camera-ring finish
• Apple logo appearance or availability
• Regulatory markings
• Engraving
• Antenna-line colour
• Button colour
• Button feel
• Internal machining
• Screw-post alignment
• Bracket design
• Adhesive placement
• Mesh appearance
• MagSafe magnet strength or positioning
• Weight
• Material thickness
• Overall cosmetic consistency

Minor cosmetic or construction variations that do not materially prevent normal installation may be consistent with the replacement nature of the product.

This housing is not equivalent to a brand-new Apple service housing unless specifically identified as such.

Logo, Marking, and Cosmetic Notice

Product photographs may be representative.

Depending on supplier availability and applicable marketplace requirements, the housing may differ in:

• Logo presence
• Logo position
• Regulatory text
• Model markings
• Serial-number markings
• Finish shade
• Camera-ring colour
• Internal printed codes
• Packaging

A replacement housing will not retain the original device serial number or other device-specific factory identification markings.

Device identity, storage capacity, activation status, carrier status, IMEI information, and serial information remain associated with the transferred logic board rather than the housing.

Camera Lens and Camera-Ring Notice

The replacement housing may include pre-installed camera lens covers or decorative camera rings.

These parts are not the camera modules themselves.

Before installation, inspect each camera lens cover for:

• Cracks
• Scratches
• Dust
• Adhesive residue
• Misalignment
• Uneven seating
• Internal protective films
• Surface contamination

The rear-camera modules must remain clean during transfer.

Dust, fingerprints, adhesive, or debris inside the camera openings may cause:

• Blurred images
• Light flare
• Haze
• Visible spots
• Autofocus problems
• Poor low-light performance
• Camera stabilization noise
• Image distortion

Test every rear camera, the front camera, flash, autofocus, stabilization, and video recording before final sealing.

LiDAR Notice for Pro Models

The iPhone 13 Pro and iPhone 13 Pro Max include LiDAR-related hardware that is separate from the replacement housing.

Housing replacement does not repair or replace:

• LiDAR scanner
• Rear-camera modules
• Sensor-shift stabilization hardware
• Flash assembly
• Logic-board camera circuitry

The original LiDAR and related camera components must be transferred carefully where applicable.

Improper transfer, contamination, misalignment, pressure, or connector damage may affect:

• Portrait photography
• Autofocus
• Augmented-reality functions
• Low-light focusing
• Camera calibration
• Other depth-related features

Sensor-Shift Camera Notice

Certain iPhone 13-series models use advanced camera stabilization hardware that can be sensitive to impact, contamination, pressure, or incorrect mounting.

During transfer:

• Do not press directly on the camera modules.
• Avoid magnetic tools near sensitive components where practical.
• Keep the camera modules free from dust and adhesive.
• Reinstall all brackets and cushioning materials correctly.
• Use the correct screws in their original positions.
• Confirm that no housing component presses against the cameras.

After installation, test:

• Camera focus
• Image stabilization
• Video stabilization
• Camera switching
• Portrait mode
• Low-light operation
• Optical zoom on supported Pro models

MagSafe and Wireless-Charging Notice

The iPhone 13 series supports MagSafe and wireless charging.

Depending on the selected housing, the MagSafe magnet ring, alignment magnet, wireless-charging coil, NFC components, or related brackets may not be included.

These parts may require transfer from the original device.

After installation, test:

• Wired charging
• Wireless charging
• MagSafe charger alignment
• Magnetic accessory attachment
• NFC functionality
• Apple Pay where applicable
• Charging temperature
• Charging stability

MagSafe or wireless-charging performance may be affected by:

• Missing magnets
• Incorrect magnet placement
• Damaged wireless-charging coil
• Damaged NFC components
• Excessive adhesive
• Internal misalignment
• Incompatible housing construction
• Logic-board faults
• Installation damage

Antenna and Regional Compatibility Notice

Different regional iPhone 13-series versions may use different antenna hardware and housing openings.

Certain United States models may include mmWave antenna hardware and a corresponding side-frame antenna window not used by other regional versions.

Before installation, compare:

• Complete A-number
• mmWave antenna opening
• Cellular antenna brackets
• Internal grounding contacts
• SIM-tray position
• Side-button layout
• Screw posts
• Flex-cable routing
• Camera openings
• Speaker and microphone openings
• Wireless-charging clearances
• Logic-board mounting points

Installing an incorrect regional housing may cause:

• Missing antenna mounting points
• Poor cellular reception
• Failed 5G or mmWave operation
• Poor Wi-Fi or Bluetooth performance
• Incorrect fitment
• Damaged antenna flex cables
• Button misalignment
• Missing internal contacts
• Difficulty transferring components

Matching only the model name and exterior colour is not sufficient.

SIM and eSIM Compatibility Notice

Regional iPhone 13-series models may use different physical SIM and eSIM configurations.

Before ordering, confirm:

• Whether the original device has a physical SIM tray
• The position and shape of the SIM opening
• The SIM-eject mechanism
• The internal SIM hardware
• Regional antenna configuration
• Complete A-number

A housing with the wrong SIM or regional configuration may not accept the original SIM hardware or may lack the correct openings and mounting points.

Face ID and Front-Sensor Notice

Face ID components are separate from the replacement housing.

Housing replacement does not repair or replace:

• Dot projector
• Flood illuminator
• Infrared camera
• Front-facing camera
• Ambient-light sensor
• Proximity sensor
• Logic-board Face ID circuitry

Many Face ID components are paired to the original logic board.

Improper disassembly, component transfer, connector damage, flex-cable damage, contamination, or pressure may cause permanent loss of Face ID.

After installation, test:

• Face ID
• Front-facing camera
• Proximity sensing during calls
• Automatic brightness
• Tap to Wake
• Raise to Wake
• Earpiece-speaker operation
• Screen wake and sleep

Button and Flex-Cable Notice

Physical buttons or supporting brackets may be pre-installed, but the electronic button flex cables may still require transfer.

After installation, test:

• Side button
• Volume-up button
• Volume-down button
• Ring/Silent switch
• Screenshot shortcut
• Emergency SOS functions
• Apple Pay side-button activation
• Power-on and shutdown operation

Button problems may result from:

• Incorrect bracket placement
• Misaligned button flex cables
• Missing pads or spacers
• Bent housing sections
• Incorrect screws
• Damaged flex cables
• Excessive adhesive
• Incompatible pre-installed components

Battery and Safety Notice

The original battery normally requires removal and transfer during housing replacement.

Lithium-ion batteries must be handled carefully.

Do not reuse a battery showing:

• Swelling
• Deformation
• Puncture damage
• Leakage
• Torn wrapping
• Exposed internal material
• Unusual odour
• Excessive heat
• Damaged flex cables
• Corroded contacts

Do not puncture, fold, crush, twist, or sharply bend the battery.

A damaged lithium-ion battery may cause:

• Fire
• Smoke
• Toxic vapour
• Chemical leakage
• Burns
• Short circuits
• Excessive heat
• Damage to the phone or surrounding property

Replace a swollen, punctured, bent, or otherwise damaged battery rather than transferring it into the replacement housing.

Display Fitment Notice

Inspect the replacement housing carefully before installing the display.

Confirm that:

• The frame is straight.
• All corners are correctly shaped.
• No screw posts are raised.
• No debris is present.
• Camera brackets sit correctly.
• Button hardware is properly positioned.
• The battery and transferred components sit flat.
• Display clips and mounting areas are unobstructed.
• No internal component places pressure against the screen.

Incorrect component placement or housing distortion may cause:

• Internal OLED damage
• Black spots
• Display lines
• Touch failure
• Raised screen edges
• Uneven gaps
• Screen separation
• Flex-cable stress
• Cracked glass

Do not force the display into place.

Internal-Component Transfer Notice

Housing replacement is significantly more involved than a standard screen or battery replacement.

The repair requires near-complete disassembly of the original iPhone.

During transfer:

• Keep screws organized by exact position and length.
• Photograph component placement before removal.
• Preserve original brackets, shields, foam pads, and grounding contacts.
• Avoid mixing screws of different lengths.
• Disconnect the battery before removing or connecting other components.
• Avoid touching camera lenses and sensor surfaces.
• Keep adhesive away from microphones and speaker openings.
• Confirm that antenna contacts are not bent.
• Ensure all flex cables follow their original routing.
• Do not trap flex cables beneath the logic board, battery, or other components.
• Confirm that thermal pads and shields are reinstalled correctly.
• Replace damaged adhesive, seals, gaskets, and cushioning materials.

Incorrect screw placement may damage the logic board, display, battery, or other internal components.

Installation Notes

Professional installation is strongly recommended.

Housing replacement requires extensive disassembly, specialized tools, controlled heat, careful battery handling, and transfer of delicate paired components.

Improper handling may damage:

• Logic board
• Battery
• Display assembly
• Face ID components
• Front-facing camera
• Rear-camera modules
• LiDAR hardware
• Charging-port assembly
• Wireless-charging coil
• MagSafe components
• NFC hardware
• Antennas
• Speakers
• Microphones
• Taptic Engine
• Side-button flex cable
• Volume and Ring/Silent switch flex cable
• Internal connectors
• Replacement housing

Before final installation:

• Confirm the exact iPhone model and A-number.
• Confirm regional and SIM housing compatibility.
• Confirm the selected housing colour.
• Compare the replacement housing with the original device.
• Identify which miscellaneous parts are pre-installed.
• Identify which original components require transfer.
• Inspect the housing for dents, bends, scratches, or machining defects.
• Inspect all camera lens covers and rings.
• Confirm that all required mounting posts and openings are present.
• Power off the phone.
• Disconnect the battery before removing other components.
• Keep screws organized by exact position and length.
• Transfer the logic board carefully.
• Transfer the charging-port assembly without sharply bending its flex cable.
• Transfer antennas and grounding contacts accurately.
• Transfer the wireless-charging coil and MagSafe components where required.
• Transfer cameras without contaminating lenses or sensors.
• Transfer Face ID and front-sensor components carefully.
• Inspect the battery before reuse.
• Replace damaged adhesive, seals, gaskets, and foam pads.
• Confirm that all internal components sit flat.
• Check for trapped or pinched flex cables.
• Confirm that no screws, glass fragments, or debris remain beneath the battery or display.
• Connect and test the phone before final sealing.
• Test display image and touchscreen response.
• Test Face ID.
• Test the front and rear cameras.
• Test LiDAR functions on supported Pro models.
• Test autofocus and camera stabilization.
• Test the flash.
• Test proximity sensing and automatic brightness.
• Test the side, volume, and Ring/Silent controls.
• Test the earpiece speaker and loudspeaker.
• Test all microphones.
• Test vibration and Taptic Engine operation.
• Test wired charging and data transfer.
• Test wireless charging.
• Test MagSafe alignment.
• Test NFC and Apple Pay where applicable.
• Test Wi-Fi, Bluetooth, GPS, cellular reception, and 5G where available.
• Test the physical SIM and eSIM where applicable.
• Check for overheating or abnormal battery drain.
• Confirm that the display sits evenly in the housing.
• Do not permanently seal the phone until all functions have been tested.

Water-Resistance Notice

Replacing the housing requires extensive disassembly and compromises the original factory seals.

Replacement adhesive and seals may help reduce exposure to dust and incidental moisture, but the original water-resistance rating cannot be restored or guaranteed after repair.

A repaired iPhone should not be relied upon for:

• Swimming
• Showering
• Underwater photography
• Exposure to steam
• Heavy rain
• High-humidity environments
• Other intentional liquid exposure

Sealing performance may be reduced by:

• Replacement-housing tolerances
• Display condition
• Adhesive quality
• Missing gaskets or seals
• Improper cleaning
• Uneven pressure
• Component misalignment
• Previous repairs
• Corrosion
• Frame distortion

Avoid exposing the repaired device to water, steam, high humidity, or other liquids.

Package Contents

• 1 × Replacement housing for the selected Apple iPhone 13-series model
• Selected miscellaneous parts pre-installed

The following are not included unless specifically stated:

• Logic board
• Battery
• Display
• Face ID components
• Front or rear cameras
• LiDAR scanner
• Charging-port assembly
• Wireless-charging coil
• MagSafe components
• NFC hardware
• Speakers
• Taptic Engine
• Major functional flex cables
• Tools
• Installation adhesive
• Display seal
• Clamps
• Installation service

Exact included miscellaneous components may vary by model, colour, regional version, supplier, and production batch.

Warranty

This component includes a 30-day limited parts-only warranty against confirmed manufacturing defects, subject to the applicable 3C-Easy Markham Component Warranty.

The warranty does not cover:

• Cracked, chipped, scratched, or shattered rear glass
• Dents, bends, twisting, or frame deformation
• Cosmetic damage occurring after delivery
• Damage caused during internal-component transfer
• Damaged screw posts caused by over-tightening
• Stripped threads
• Damage caused by incorrect screws
• Broken camera lens covers after installation
• Dust or contamination inside the camera openings
• Colour or finish differences consistent with replacement components
• Minor shade variation
• Differences in logos, markings, engraving, or regulatory text
• Button problems caused by transferred flex cables or installation
• Camera, LiDAR, Face ID, charging, antenna, or sensor faults
• Poor reception caused by incorrect regional housing selection or antenna transfer
• Physical SIM or eSIM incompatibility
• Wireless-charging, MagSafe, or NFC problems caused by transferred components
• Damage caused by a swollen, punctured, or incorrectly transferred battery
• Torn, folded, punctured, stretched, or damaged flex cables
• Bent connector pins or damaged logic-board sockets
• Incorrect model, region, colour, SIM configuration, or revision selection
• Installation in an incompatible device
• Improper installation
• Physical, impact, pressure, or twisting damage
• Liquid, moisture, or corrosion damage
• Damage caused by excessive heat
• Adhesive or sealing failure
• Water-resistance limitations
• Software, iOS, activation, calibration, pairing, or compatibility issues
• Damage to the logic board, display, battery, cameras, or other components during installation
• Labour, diagnostics, programming, installation, removal, shipping, or related repair costs

Inspect the housing carefully before transferring internal components.

Housing assemblies showing installation marks, transferred adhesive, stripped threads, damaged screw posts, bent sections, scratches, or other installation-related damage may not qualify for warranty coverage.

Important Notes

• Replacement housing for Apple iPhone 13 Mini, 13, 13 Pro, and 13 Pro Max.
• Select the exact device model before ordering.
• Select the correct housing colour before ordering.
• Confirm the complete A-number.
• Regional, SIM, antenna, and mmWave housing configurations may differ.
• Selected miscellaneous parts are pre-installed.
• Exact included components may vary between production batches.
• Major functional components are not included.
• Near-complete disassembly of the original phone is required.
• Most internal components must be transferred from the original device.
• The logic board controls the IMEI, serial number, storage capacity, activation status, and carrier identity.
• Replacement housings do not retain the original device-specific serial markings.
• Finish shade, logo, engraving, antenna-line colour, button appearance, and internal machining may differ from the original housing.
• Verify whether MagSafe magnets and wireless-charging components are included before installation.
• Inspect the camera lens covers before transferring the camera modules.
• Keep camera lenses and sensors free from dust, adhesive, and fingerprints.
• Inspect the battery for swelling or physical damage before transfer.
• Do not reuse a damaged lithium-ion battery.
• Test the display, Face ID, cameras, LiDAR, stabilization, buttons, charging, MagSafe, NFC, audio, vibration, sensors, antennas, and connectivity before final sealing.
• No tools or installation adhesive are included unless specifically stated.
• Original water resistance cannot be restored or guaranteed after repair.
• Professional installation is strongly recommended.
• Product appearance, finish, markings, included components, internal layout, and packaging may vary between production batches.

Apple, iPhone, iOS, Face ID, MagSafe, Apple Pay, LiDAR, and related trademarks belong to Apple Inc. and are used only to identify product compatibility. 3C-Easy Markham is not affiliated with or endorsed by Apple Inc.