One Faulty Charger, Two Dead iPhones: How We Restored an iPhone 15 Pro and iPhone 16 Pro

One Faulty Charger, Two Dead iPhones: How We Restored an iPhone 15 Pro and iPhone 16 Pro

Real repair case study | 3C-Easy Markham

When a Charger Becomes More Than a Charging Problem

We rely on our chargers every day, often without giving them a second thought. But when charging equipment fails electrically, the consequences can extend far beyond a damaged charging port.

Recently, 3C-Easy Markham handled an unusual case involving two iPhones belonging to the same owners: an iPhone 15 Pro and an iPhone 16 Pro.

Both phones had stopped powering on after being connected to the same reportedly faulty charger. More concerning than the devices themselves was the important personal data stored inside them.

The owners urgently needed their information back.

A third device, a Samsung Galaxy S24 Ultra, had reportedly been affected by the same charger. Unfortunately, due to time constraints, it was not left with us for examination or repair.

With two completely non-responsive iPhones on our workbench, our objective was clear: identify the electrical failures, restore functionality, and preserve the owners' access to their data wherever possible.

Case One: iPhone 16 Pro — Three Damaged Integrated Circuits

The iPhone 16 Pro would no longer power on.

Rather than assuming the battery or charging port was responsible, we investigated the logic board for component-level electrical faults.

Our diagnosis identified three damaged integrated circuits:

  • 2E4B — USB Power Delivery (USB-PD) charging control IC

  • SN2012027/A23 — USB-C charging controller

  • 338S01119 — Power Management Integrated Circuit (PMIC)

These components perform different but related functions within the phone's charging and power-management systems.

The USB-PD circuitry helps manage charging-related power delivery. The USB-C controller handles essential aspects of the USB-C connection and charging operation, while the PMIC regulates power distribution within the device.

Damage affecting multiple components in these systems can produce symptoms much more serious than a phone simply refusing to charge.

After identifying and replacing all three faulty integrated circuits, we successfully restored the iPhone 16 Pro to normal operation.

Case Two: iPhone 15 Pro — Two More Failed Chips

The iPhone 15 Pro presented a similar problem: it was completely unable to power on following the reported charging incident.

Our component-level diagnosis revealed two damaged integrated circuits:

  • 2E4B — USB-PD charging control IC

  • 338S00946 — Charging-related power management IC

Interestingly, the 2E4B was also among the failed components in the iPhone 16 Pro.

Although the two devices use different internal power-management architectures, both suffered damage involving their charging and power-delivery circuitry.

After the two defective components were replaced, the iPhone 15 Pro also returned to normal operation.

Both iPhones were successfully repaired without replacing their complete logic boards.

Why Motherboard Repair Matters When Data Is at Risk

For many customers, a phone's replacement value is secondary to the information stored inside it.

Photos, conversations, documents, authentication credentials, and other personal information may be difficult or impossible to replace if no usable backup exists.

This is why a completely dead smartphone requires careful diagnosis before deciding on a repair strategy.

In cases involving important data, replacing the entire logic board is not necessarily an acceptable solution. A replacement board does not contain the personal data stored on the original device.

Component-level motherboard repair offers a different approach.

By identifying and replacing specific failed components while retaining the original data-bearing hardware, it may be possible to restore the device sufficiently for the owner to access and back up their information.

That was particularly important in these two cases.

Fortunately, neither iPhone required a complete logic-board replacement, and both returned to normal operation following the repairs.

How Could One Charger Affect Multiple Phones?

Charging equipment is responsible for delivering electrical power to a connected device within its supported operating parameters.

Modern smartphones incorporate sophisticated charging-management circuitry, but those systems are not invulnerable to electrical faults.

Depending on the nature of a failure, abnormal electrical conditions can potentially damage charging controllers, power-management components, or other circuitry.

In this incident, two iPhones shared the same reported charger exposure and experienced failures in related electrical systems. A third smartphone was also reportedly affected.

These circumstances strongly suggest a common charging-related incident.

However, the charger itself was not independently characterized through electrical testing as part of this case study. Therefore, we cannot establish the precise failure mechanism or determine exactly which electrical condition caused the damage.

It is also important to understand that a charger being capable of high-wattage output does not, by itself, make it dangerous. Properly designed USB-C charging systems negotiate supported power levels between the charger and connected device.

The quality, electrical protection, and condition of the charging equipment matter far more than the advertised wattage alone.

Going Beyond the Repair

Once both iPhones were restored, we wanted to reduce the risk of the owners experiencing another charging-related incident.

As an additional precaution, 3C-Easy Markham provided two sets of Anker charging equipment to the owners.

This was not a required component of the motherboard repairs. It was a practical precaution intended to help the customers resume charging their devices using replacement equipment from an established accessory manufacturer.

We also recommend immediately discontinuing the use of any charger or cable suspected of causing electrical damage.

What You Should Do If Your Phone Stops Working After Charging

If a phone suddenly becomes unresponsive after connection to a particular charger:

  1. Stop using the suspected charger immediately. Do not test it on another valuable device.

  2. Avoid repeatedly attempting to charge the affected phone, particularly if there are signs of overheating, unusual smells, or physical damage.

  3. Inform the repair technician about the charging incident. This information can help guide electrical diagnosis.

  4. Mention whether the data is important before authorizing repairs. Data preservation may require a different repair approach from ordinary device replacement.

  5. Back up important information as soon as access is restored. A successful repair should not be treated as a substitute for a reliable backup.

Not every non-powering phone can be repaired, and successful data recovery cannot be guaranteed. The outcome depends on which components have failed and whether critical data-bearing circuitry remains functional.

Our Approach at 3C-Easy Markham

These two repairs illustrate why we believe careful diagnosis matters.

A phone that will not turn on is not automatically beyond repair, and a failed logic board does not always require complete replacement.

In these cases, five damaged integrated circuits across two devices were identified and replaced, allowing both iPhones to return to normal operation.

For the owners, the most important result was the restoration of their phones—and, with them, access to the information they urgently needed.

At 3C-Easy Markham, we believe repair decisions should be based on technical findings, realistic expectations, and the customer's actual priorities.

Sometimes, the most valuable part of a smartphone isn't the device itself. It's what's inside.


3C-Easy Markham — Phone & Tablet Repair

Pacific Mall, Unit B06
4300 Steeles Avenue East, Markham, Ontario

Phone: 647-340-0706
Website: https://3ceasymarkham.ca

Disclaimer: This article describes specific repair cases. Component-level motherboard repairs are subject to diagnostic findings, and successful repair or data recovery is not guaranteed. The charger-related cause described here is based on the reported incident and observed device failures, rather than independent electrical characterization of the charger.

Leave a comment