HyperGear HD Tempered Glass Screen Protector for Apple iPhone 16 Pro & iPhone 16 Pro Max

Protect the display of your Apple iPhone 16 Pro or iPhone 16 Pro Max with the HyperGear HD Tempered Glass Screen Protector.

Designed to combine strong everyday protection with high optical clarity and responsive touch performance, HyperGear’s HD Tempered Glass uses an ultra-thin four-layer construction with a 9H surface-hardness rating to help protect the original iPhone display against scratches, nicks, bumps, and certain accidental impacts.

The protector also incorporates built-in shatter prevention, an anti-fingerprint surface treatment, crystal-clear transparency, and a smooth glass surface designed to preserve bare-screen-like touchscreen sensitivity.

Each protector comes preloaded in an Alignment Tray, helping simplify positioning and reduce accidental misalignment during installation.

Separate model-specific protectors are available for:

• Apple iPhone 16 Pro
• Apple iPhone 16 Pro Max

These two protectors are different sizes and are not interchangeable.

Available Models

Apple iPhone 16 Pro

Compatible with:

• Apple iPhone 16 Pro
• 6.3-inch display
• A3083
• A3292 – Canadian and selected international regions
• A3293
• A3294
• UPC: 633755161032

Apple iPhone 16 Pro Max

Compatible with:

• Apple iPhone 16 Pro Max
• 6.9-inch display
• A3084
• A3295 – Canadian and selected international regions
• A3296
• A3297
• UPC: 633755160974

Please confirm the exact device under:

Settings > General > About

Canadian Model Reference

For Canadian devices:

• iPhone 16 Pro – A3292
• iPhone 16 Pro Max – A3295

These regional model numbers do not affect screen-protector fitment within the same iPhone model.

Not Interchangeable

The iPhone 16 Pro and iPhone 16 Pro Max use different front-glass dimensions.

The protectors are therefore not interchangeable.

The iPhone 16 Pro uses a 6.3-inch display, while the iPhone 16 Pro Max uses a 6.9-inch display.

Do not attempt to install:

• iPhone 16 Pro protector on iPhone 16 Pro Max
• iPhone 16 Pro Max protector on iPhone 16 Pro

Not Compatible With

These protectors are not compatible with:

• iPhone 16
• iPhone 16 Plus
• iPhone 16e
• iPhone 15 Pro
• iPhone 15 Pro Max
• iPhone 17 series
• Other Apple iPhone models

Similar appearance or Dynamic Island design does not guarantee compatibility.

Differences may include:

• Display size
• Glass dimensions
• Bezel dimensions
• Front-camera position
• Sensor alignment
• Speaker placement
• Case clearance

Always select the exact model.

Product Identification

Product details may include:

• Brand: HyperGear
• Product type: HD Tempered Glass Screen Protector
• Finish: Clear
• Glass construction: Ultra-thin tempered glass
• Surface hardness: 9H
• Protective construction: Four layers
• Transparency: Crystal clear
• Touch design: Bare-screen touch sensitivity
• Shatter protection: Built-in
• Surface treatment: Anti-fingerprint
• Installation system: Preloaded Alignment Tray
• Fitment: Edge-to-edge, case-friendly coverage

Package Contents

The package generally includes:

• One HyperGear HD Tempered Glass Screen Protector
• One preloaded Alignment Tray
• Cleaning wipe where supplied
• Microfiber cloth where supplied
• Dust-removal sticker where supplied
• Installation instructions where supplied

The following are not included:

• iPhone
• Protective case
• Camera-lens protector
• Replacement display
• Repair tools
• Charging cable
• Wall charger
• Professional installation service

Exact cleaning accessories may vary by packaging revision.

Key Features

• Genuine HyperGear screen protector
• Separate versions for iPhone 16 Pro and iPhone 16 Pro Max
• Ultra-thin tempered-glass construction
• 9H hardness rating
• Four protective layers
• Built-in shatter prevention
• Crystal-clear transparency
• Bare-screen touch sensitivity
• Anti-fingerprint treatment
• Smooth glass-like surface
• Edge-to-edge protective coverage
• Precision-cut case-friendly fit
• Preloaded Alignment Tray
• Designed for Dynamic Island compatibility
• Designed to preserve Face ID operation
• Compatible with ProMotion display operation
• Compatible with many properly fitted cases
• Suitable for everyday home, work, school, and travel use

Four-Layer Protective Construction

HyperGear describes this protector as using four layers of protection.

The multilayer construction is designed to balance:

• Impact resistance
• Scratch resistance
• Shatter retention
• Optical clarity
• Adhesive performance
• Touchscreen responsiveness

The exact chemical or material composition of every layer is not publicly detailed in the available HyperGear product information.

Therefore, the four-layer specification should not be interpreted as four separate pieces of glass.

Ultra-Thin Tempered Glass

The protector uses ultra-thin tempered glass designed to preserve comfortable touchscreen use while providing a stronger protective barrier than an unprotected display.

Potential benefits include:

• Smooth glass feel
• Reduced bulk
• Clear display visibility
• Good touch response
• Improved scratch resistance
• Improved impact resistance
• Easier replacement than the original iPhone display

“Ultra-thin” is a comparative product description.

The protector still adds a physical layer above the display.

9H Surface Hardness

HyperGear specifies a 9H surface-hardness rating.

This rating indicates resistance to scratches from many common everyday materials under applicable testing conditions.

It may help resist contact with:

• Keys
• Coins
• Zippers
• Desk surfaces
• Bag contents
• Pocket debris
• Light abrasive contact

A 9H rating does not mean the protector cannot be scratched.

Hard materials such as:

• Sand
• Quartz
• Ceramic particles
• Masonry dust
• Hardened metal fragments
• Rough stone
• Sharp tools

may still scratch or damage the glass.

Scratch Protection

The protector acts as a sacrificial layer above the original iPhone display.

It helps reduce direct contact with:

• Keys
• Coins
• Zippers
• Bags
• Desks
• Counters
• Everyday debris
• Light abrasive surfaces

Normal scratches that develop through use are considered wear rather than a manufacturing defect.

Built-In Shatter Prevention

HyperGear describes the protector as incorporating built-in shatter prevention.

This construction is intended to help keep damaged glass more controlled if the protector cracks.

Potential benefits may include:

• Reduced loose glass fragments
• Improved containment of fractured glass
• Easier controlled removal
• Reduced spreading of damaged pieces

Shatter prevention does not mean the protector cannot crack or break.

A severely damaged protector should be replaced promptly.

Tempered-Glass Breakage

Tempered glass is intentionally designed as a replaceable protective layer.

During a strong impact, the protector itself may:

• Crack
• Chip
• Fracture
• Shatter

This can be part of its sacrificial protective function.

Protector breakage does not automatically mean the product was defective.

However, a broken protector also does not guarantee that the original iPhone display remains undamaged.

Drop and Impact Protection

HyperGear markets the HD Tempered Glass as protection against:

• Drops
• Impacts
• Nicks
• Scratches
• Bumps

Actual protection depends on:

• Drop height
• Surface hardness
• Impact angle
• Existing phone damage
• Case use
• Protector condition
• Whether the phone hits a sharp object

HyperGear does not provide a universally applicable fixed drop-height rating for this specific iPhone 16 Pro / Pro Max glass in the product information verified here.

Therefore, this listing does not claim a specific drop height.

Crystal-Clear Transparency

The protector is designed to preserve the appearance of the underlying Super Retina XDR display.

When correctly installed and kept clean, it should minimize unnecessary interference with:

• Text sharpness
• Colour reproduction
• Screen brightness
• HDR content
• Photos
• Video
• Gaming
• Dynamic Island
• Always-On Display
• ProMotion animations
• Outdoor visibility

The protector does not increase or change the display’s native technical specifications.

HD Clarity

“HD” refers to the protector’s intended optical clarity.

It does not increase:

• Display resolution
• Pixel density
• Maximum brightness
• HDR capability
• Colour depth
• Refresh rate

The protector is designed to preserve the original image rather than improve the panel itself.

Bare-Screen Touch Sensitivity

HyperGear describes the protector as providing bare-screen touch sensitivity.

The ultra-thin glass is designed to preserve normal capacitive touchscreen response.

After installation, test:

• Taps
• Swipes
• Scrolling
• Keyboard input
• Multi-touch gestures
• Pinch-to-zoom
• Long presses
• Dragging
• Gaming input
• Home gestures
• Control Centre
• Notification Centre
• Edge gestures
• Camera Control-related touchscreen interaction where applicable

A properly installed protector should not unnecessarily interfere with normal touch operation.

Touchscreen Limitations

Touch response can be affected by:

• Dust under the protector
• Air gaps
• Incorrect installation
• Existing display damage
• Aftermarket screen geometry
• Software
• Moisture
• Case pressure
• Multiple protective layers

The protector cannot repair an existing touchscreen fault.

ProMotion Compatibility

The iPhone 16 Pro and iPhone 16 Pro Max support Apple ProMotion adaptive refresh-rate technology.

The screen protector is a passive protective layer and does not control refresh rate.

A properly installed protector should preserve normal visual use of:

• Smooth scrolling
• High-refresh animations
• Gaming
• Gesture navigation
• Touch response

Refresh-rate behaviour remains controlled by:

• iOS
• Application
• Device temperature
• Battery state
• Content
• System settings

Dynamic Island Compatibility

Both iPhone 16 Pro models use Apple’s Dynamic Island front-camera and sensor area.

The protector is precision-cut around the compatible display layout.

Correct installation should preserve normal use of:

• Dynamic Island
• Front camera
• Face ID
• Attention-aware functions
• Proximity sensing
• Ambient-light sensing

Misalignment may affect the appearance or operation of the front sensor area.

Face ID Compatibility

The protector is designed to preserve normal Face ID functionality when correctly installed.

Face ID may still be affected by:

• Dust
• Residue
• Moisture
• Misalignment
• Existing TrueDepth damage
• Previous screen repair
• Software problems

A screen protector cannot repair a defective Face ID system.

Anti-Fingerprint Treatment

HyperGear includes an anti-fingerprint surface treatment.

This helps reduce visible:

• Fingerprints
• Skin oils
• Smudges
• Swipe marks

The coating does not eliminate fingerprints completely.

Regular cleaning is still required.

Surface coatings naturally wear over time through:

• Repeated use
• Cleaning
• Friction
• Chemical exposure

Gradual reduction in coating effectiveness is normal wear.

Smooth Finger Glide

The glass surface is designed to provide comfortable finger movement during:

• Typing
• Scrolling
• Gaming
• Web browsing
• Photo editing
• Social media
• Gesture navigation

Surface feel may change gradually with:

• Wear
• Finger oils
• Scratches
• Dust
• Cleaning products

Regular cleaning helps maintain smooth operation.

Edge-to-Edge Coverage

HyperGear describes the protector as providing broad edge-to-edge screen protection.

This means the glass is designed to cover a large portion of the usable display while remaining compatible with most properly fitted cases.

“Edge-to-edge” does not necessarily mean the protector reaches the absolute outermost edge of the phone chassis.

A small perimeter margin may remain for:

• Case clearance
• Rounded edge geometry
• Adhesive stability
• Installation tolerance

Case-Friendly Design

The protector is precision-cut to work with many properly fitted phone cases.

Compatibility with every case cannot be guaranteed.

A case may interfere if it has:

• Very tight front lips
• Built-in screen protection
• Thick inward-facing edges
• Incorrect dimensions
• Warped construction

Case interference may cause:

• Edge lifting
• Air bubbles
• Glass chipping
• Reduced adhesion

Install the protector before fitting the case and confirm adequate clearance.

Alignment Tray

The protector comes preloaded in a model-specific Alignment Tray.

The tray helps:

• Centre the protector
• Align the top and sides
• Reduce handling of the adhesive surface
• Improve installation consistency
• Reduce accidental misalignment

The tray does not eliminate the need for careful cleaning.

Dust left on the display may still become trapped beneath the glass.

Installation Preparation

For best results:

1. Confirm the exact iPhone model.
2. Confirm the correct HyperGear protector version.
3. Remove the phone case.
4. Wash and dry your hands.
5. Clean the display thoroughly.
6. Remove oil and fingerprints.
7. Remove all visible dust.
8. Inspect the display for cracks.
9. Confirm the frame is not bent.
10. Review the supplied HyperGear instructions.

Install in a:

• Clean
• Dry
• Well-lit
• Low-dust environment

Avoid:

• Fans
• Open windows
• Heating vents
• Air-conditioning vents
• Pets
• Dusty workspaces
• Lint-producing fabric

Typical Alignment-Tray Installation

Follow the instructions supplied with the package.

A typical installation may include:

1. Remove the protective case.
2. Clean the screen using the included wipe where supplied.
3. Dry using the microfiber cloth.
4. Use the dust-removal sticker.
5. Inspect the screen carefully.
6. Position the Alignment Tray over the iPhone.
7. Confirm the tray is fully seated.
8. Follow the tray instructions to release or place the protector.
9. Apply gentle pressure to the centre.
10. Allow the adhesive to spread toward the edges.
11. Remove the tray as directed.
12. Push remaining air toward the nearest edge.
13. Inspect alignment.
14. Test touch response.
15. Test Face ID.
16. Reinstall the case.

Do not use excessive force.

Dust and Bubble Notice

Bubbles may be caused by:

• Dust
• Hair
• Lint
• Fingerprints
• Oil
• Moisture
• Existing scratches
• Misalignment
• Incomplete adhesion

Small air-only bubbles may sometimes disappear or be pushed toward an edge.

Bubbles caused by trapped particles generally require lifting or replacing the protector.

Repeatedly lifting and repositioning can:

• Reduce adhesive strength
• Introduce more dust
• Create edge lift
• Increase breakage risk

Edge Lifting

Edge lifting may occur because of:

• Case interference
• Misalignment
• Dust
• Oil
• Frame damage
• Aftermarket replacement screens
• Repeated repositioning
• Adhesive contamination

If lifting begins after fitting a case, remove the case and check for direct pressure against the protector.

Compatibility With Replacement Displays

The HyperGear protector is designed around original iPhone display dimensions.

Aftermarket or refurbished replacement screens may differ slightly in:

• Glass dimensions
• Bezel width
• Surface curvature
• Installed height
• Edge profile

These differences may affect:

• Protector adhesion
• Edge clearance
• Case compatibility
• Bubble formation

Compatibility with every replacement screen cannot be guaranteed.

iPhone 16 Pro Display Reference

Apple identifies the iPhone 16 Pro with:

• 6.3-inch Super Retina XDR display
• Dynamic Island
• ProMotion
• Always-On Display
• Titanium frame

Model numbers include:

• A3083
• A3292
• A3293
• A3294

The Canadian model is A3292.

iPhone 16 Pro Max Display Reference

Apple identifies the iPhone 16 Pro Max with:

• 6.9-inch Super Retina XDR display
• Dynamic Island
• ProMotion
• Always-On Display
• Titanium frame

Model numbers include:

• A3084
• A3295
• A3296
• A3297

The Canadian model is A3295.

Protector Removal

To remove the protector:

1. Remove the case.
2. Turn off the iPhone where practical.
3. Begin at an accessible corner.
4. Lift gently using a fingernail or plastic tool.
5. Separate the glass slowly.
6. Keep cracked fragments controlled.
7. Clean the display afterward.

Avoid:

• Knives
• Razor blades
• Metal screwdrivers
• Sharp picks

These can damage the original screen.

Damaged Protector Safety

Replace the protector if it becomes:

• Cracked
• Chipped
• Severely scratched
• Loose
• Sharply fractured

Damaged tempered glass may develop sharp edges.

Handle carefully during removal.

Cleaning and Maintenance

Clean the installed protector using:

• Soft microfiber cloth
• Screen-safe cleaner
• Lightly dampened lint-free cloth

Avoid:

• Abrasive pads
• Rough paper towels
• Bleach
• Acetone
• Strong solvents
• Sharp tools
• Excessive liquid

Do not spray cleaner directly into:

• Earpiece
• USB-C port
• Buttons
• Display edges

Water and Moisture Notice

The protector is not waterproof.

It does not increase, restore, or guarantee the iPhone’s original water resistance.

It does not seal:

• Display perimeter
• Earpiece
• USB-C port
• Buttons
• Internal components

A screen protector is intended for surface protection only.

Protection Limitations

No tempered-glass protector can guarantee protection against:

• Every scratch
• Every drop
• Severe impact
• Internal OLED damage
• Bent frames
• Crushing
• Liquid ingress
• Camera damage
• Logic-board damage
• Fire
• Theft
• Loss

The protector is a sacrificial accessory and is not device insurance.

Product Condition

This listing is for a new HyperGear HD Tempered Glass Screen Protector.

Inspect the product before installation for:

• Cracks
• Chips
• Adhesive contamination
• Incorrect dimensions
• Damaged Alignment Tray
• Packaging damage

Do not install a visibly defective protector.

Packaging Variation

Packaging may vary according to:

• iPhone model
• Production batch
• Retail channel
• Distributor
• Language
• HyperGear packaging revision

Minor packaging differences do not necessarily affect compatibility.

Always verify the selected device model and UPC.

UPC Reference

iPhone 16 Pro

• Product: HyperGear HD Tempered Glass Screen Protector
• Compatibility: Apple iPhone 16 Pro
• UPC: 633755161032

iPhone 16 Pro Max

• Product: HyperGear HD Tempered Glass Screen Protector
• Compatibility: Apple iPhone 16 Pro Max
• UPC: 633755160974

These UPC mappings are based on the product data supplied for this listing.

Important Notes

• Genuine HyperGear HD Tempered Glass Screen Protector
• Separate iPhone 16 Pro and iPhone 16 Pro Max versions
• iPhone 16 Pro UPC 633755161032
• iPhone 16 Pro Max UPC 633755160974
• 9H surface hardness
• Four protective layers
• Ultra-thin tempered glass
• Crystal-clear transparency
• Bare-screen touch sensitivity
• Built-in shatter prevention
• Anti-fingerprint treatment
• Edge-to-edge case-friendly coverage
• Preloaded Alignment Tray
• Designed for normal Face ID operation
• Designed for Dynamic Island compatibility
• Compatible with ProMotion use
• Phone is not included
• Protective case is not included
• No screen protector can prevent every type of display damage

HyperGear Manufacturer Warranty

This product is covered by HyperGear’s applicable manufacturer warranty against qualifying defects in materials and workmanship. HyperGear warranty periods vary by product from limited one-year through limited lifetime coverage. Please refer to the warranty information printed on the product packaging or HyperGear’s current warranty terms for the exact coverage applicable to this screen protector. Warranty service requires valid proof of purchase and is limited to the original purchaser.

The manufacturer warranty does not cover normal wear and tear, accidental damage, improper care, misuse, abuse, product modification, disassembly, or alteration. It also does not cover damage to the connected iPhone, including display damage, data loss, repair costs, or other consequential damage.

Intellectual Property Disclaimer

HyperGear, Apple, iPhone, iOS, Dynamic Island, Face ID, Super Retina XDR, ProMotion, Always-On Display, and related names, logos, technologies, and trademarks belong to their respective owners.

3C-Easy Markham is not affiliated with, authorized by, sponsored by, or endorsed by HyperGear or Apple Inc.

All brand names and model references are used solely to identify product compatibility and intended use.