Replacement Screen for Motorola G-Play 2024 (XT-2413)

Refurbished Original Replacement Screen for Motorola Moto G Play 2024

Restore image and touchscreen functionality on a compatible Motorola Moto G Play 2024 with this refurbished original replacement screen assembly supplied without frame.

The Motorola Moto G Play 2024 uses a 6.5-inch HD+ LCD display with a resolution of 1600 × 720 pixels, a 20:9 aspect ratio, and a refresh rate of up to 90 Hz. Motorola also specifies 2.5D Corning Gorilla Glass 3 and high-brightness operation up to 500 nits for the original display.

This replacement uses an original Motorola LCD panel that has been professionally restored, normally through replacement of damaged outer glass and other necessary optical, touch, or bonding materials.

A refurbished original screen is intended for customers and repair professionals seeking panel dimensions, display quality, viewing angles, touch response, refresh-rate performance, and fitment closer to the original factory screen than many low-cost aftermarket alternatives.

This screen is supplied without a middle frame. The replacement panel must be aligned and bonded into the original phone frame using suitable screen adhesive. The original frame must therefore remain straight, clean, and structurally suitable for reuse.

Compatible Models

Motorola Moto G Play 2024

• XT2413-2
• XT2413V
• Other compatible XT2413 regional or carrier variants only where the display dimensions, connector, flex-cable layout, front-camera opening, and housing design match

Motorola officially identifies XT2413-2 and XT2413V as Moto G Play 2024 variants.

Please confirm the complete model number before ordering.

Depending on the installed Android version, the model number may be found under:

Settings > About Phone > Model or Model Number

It may also appear on:

• Original packaging
• Purchase documentation
• Regulatory labels
• Carrier account information
• Device information screens
• Internal service labels

Do not select this component based only on the Moto G Play 2024 name. Regional and carrier variants may differ in:

• Cellular antenna configuration
• SIM arrangement
• Internal brackets
• Connector revisions
• Supporting components
• Flex-cable routing
• Frame details
• Carrier-specific hardware

Available Option

Refurbished Original LCD Screen Without Frame

This option includes:

• Refurbished original Motorola LCD panel
• Integrated capacitive touchscreen
• Display flex cable
• Screen assembly without middle frame

The original device frame must be reused.

No replacement frame, adhesive, tools, clamps, or installation materials are included unless specifically stated.

Key Features

• Refurbished original replacement screen
• Designed for compatible Motorola Moto G Play 2024 XT2413 models
• Original Motorola LCD panel
• Integrated capacitive touchscreen
• 6.5-inch display format
• HD+ 1600 × 720 resolution
• 20:9 aspect ratio
• Designed to support refresh rates up to 90 Hz
• Designed to restore image and touchscreen functionality
• May resolve cracked glass, failed touch, damaged LCD, image lines, distortion, or black-screen faults
• Original-style panel dimensions and viewing characteristics
• More original-like performance than many low-cost aftermarket screens
• Supplied without middle frame
• Requires bonding into the original phone frame
• Professional installation strongly recommended

Common Screen-Failure Symptoms

Replacement may be appropriate when the phone:

• Has cracked or shattered front glass
• Displays no image
• Shows vertical or horizontal lines
• Has black spots or damaged LCD areas
• Shows white patches or pressure marks
• Produces flickering or intermittent images
• Shows image distortion
• Has reduced or uneven brightness
• Shows discolouration
• Displays an image but does not respond to touch
• Has areas of missing or inaccurate touch response
• Registers unintended or ghost touches
• Produces sounds or vibrations while the display remains black
• Has internal LCD damage without a visible external crack
• Has separated display layers
• Has damaged glass around the display edges
• Has damage around the front-camera opening
• Shows abnormal scrolling or refresh-rate behaviour
• Fails after impact, pressure, bending, twisting, or liquid exposure

These symptoms may also be caused by:

• Logic-board damage
• Display-connector damage
• Liquid ingress or corrosion
• Battery failure
• Charging or power-management faults
• Damaged internal flex cables
• Front-camera or sensor problems
• Software or Android faults
• Incorrect installation
• Another defective component

Proper diagnosis is recommended before replacing the screen.

Refurbished Original LCD Quality Notes

This product uses an original Motorola LCD display panel that has undergone professional refurbishment.

The refurbishment process may include:

• Removal of damaged outer glass
• Installation of replacement cover glass
• Replacement of optical adhesive
• Cleaning and reconditioning of the original LCD panel
• Replacement or restoration of touch-related layers where required
• Inspection of display flex cables and connectors
• Testing of image and touchscreen functionality
• Testing of brightness and refresh-rate behaviour
• Inspection of glass alignment
• Inspection of the front-camera opening
• Inspection of edge finish

Because the LCD panel has previously been installed or used, refurbished screens may show minor differences in:

• Cosmetic condition
• Maximum brightness
• Colour temperature
• White balance
• Backlight uniformity
• Low-brightness performance
• Existing pressure marks
• Oleophobic coating
• Cover-glass finish
• Edge appearance
• Adhesive appearance
• Component markings
• Touch sensitivity
• Refresh-rate consistency
• Long-term performance

Minor cosmetic or performance variations that do not materially prevent normal operation may be consistent with the refurbished nature of the product.

A refurbished original screen is not equivalent to:

• A brand-new Motorola service display
• A new original factory display
• An unused original screen assembly

LCD Display Characteristics

The Moto G Play 2024 uses an LCD rather than an OLED display. The original panel is specified at 6.5 inches, HD+ resolution, and up to 90 Hz.

LCD panels rely on a backlight positioned behind the image-producing layers.

Potential characteristics include:

• Consistent full-screen illumination
• Practical colour reproduction
• Wide viewing angles
• No OLED burn-in
• Cost-effective display replacement
• Suitable brightness for everyday use
• Smooth display operation up to 90 Hz when supported

LCD panels are sensitive to:

• Impact
• Pressure
• Bending
• Twisting
• Internal debris
• Excessive heat
• Uneven frame surfaces
• Incorrect adhesive application
• Battery swelling
• Incorrectly positioned components

Internal LCD damage may occur even when the outer glass remains intact.

Backlight and Display-Uniformity Notice

Because this device uses an LCD panel, image visibility depends on the integrated backlight system.

After installation, test:

• Low brightness
• Medium brightness
• Maximum brightness
• Automatic brightness
• White backgrounds
• Grey backgrounds
• Dark backgrounds
• Solid-colour test screens
• Screen wake and sleep
• Outdoor visibility

Possible LCD-related conditions include:

• Uneven backlighting
• Bright or dark patches
• White pressure spots
• Light leakage around the edges
• Colour tint
• Flickering
• Reduced maximum brightness

These symptoms may also be caused by:

• Logic-board display circuitry
• Connector damage
• Incorrect installation
• Excessive adhesive pressure
• Frame distortion
• Software settings
• Battery condition
• Another defective component

Refresh-Rate Notice

The original Moto G Play 2024 display is designed to support refresh rates up to 90 Hz.

Actual refresh-rate behaviour may depend on:

• Display settings
• Battery Saver
• Displayed content
• Device temperature
• Battery condition
• Software version
• Firmware configuration
• Replacement-screen revision
• Logic-board condition

After installation, test:

• Standard screen operation
• Scrolling smoothness
• Touch responsiveness
• Motion clarity
• Display settings
• Low- and high-brightness operation
• Video playback
• Screen wake and sleep
• Battery consumption during normal use

A refresh-rate problem does not automatically confirm that the replacement screen is defective.

Touchscreen Notice

The replacement screen includes an integrated capacitive touchscreen layer.

After installation, test:

• Standard taps
• Swipe gestures
• Long presses
• Pinch-to-zoom
• Edge and corner response
• Keyboard input
• Gesture navigation
• Notification-panel access
• App navigation
• Multi-touch input
• Touch operation while charging

Touch problems may also be caused by:

• Damaged display connectors
• Bent connector pins
• Logic-board faults
• Incorrect panel alignment
• Excessive adhesive pressure
• Housing distortion
• Poor-quality charging accessories
• Software problems
• Another defective component

Front-Camera and Sensor Notice

The Moto G Play 2024 screen includes an opening for the front-facing camera.

The front camera and related sensors are separate components and are not included with the replacement screen.

Screen replacement does not repair or replace:

• Front-facing camera
• Proximity sensor
• Ambient-light sensor
• Earpiece speaker
• Logic-board sensor circuits

During installation:

• Keep the front-camera opening free from dust and adhesive.
• Confirm that the camera opening is aligned correctly.
• Avoid covering sensor windows.
• Reinstall all brackets, meshes, and cushioning materials correctly.
• Keep fingerprints away from camera and sensor surfaces.
• Confirm the replacement glass does not place pressure on the camera assembly.

After installation, test:

• Front-facing camera
• Face unlock where enabled
• Proximity sensing during calls
• Automatic brightness
• Screen wake and sleep
• Earpiece-speaker operation

Side Fingerprint-Sensor Notice

The Moto G Play 2024 uses a side-mounted fingerprint reader, separate from the replacement screen assembly.

Screen replacement does not repair:

• Fingerprint-sensor hardware
• Power-button fingerprint components
• Fingerprint-sensor flex cables
• Logic-board biometric circuitry
• Software-related fingerprint faults

After installation, test:

• Power-button operation
• Screen wake and lock
• Fingerprint recognition
• Fingerprint enrolment
• Multiple recognition attempts
• Power-menu access

Fingerprint problems may be caused by:

• Damaged sensor hardware
• Torn flex cables
• Incorrect button or sensor alignment
• Missing brackets
• Connector damage
• Internal pressure
• Software configuration
• Logic-board faults
• Unrelated device damage

Without-Frame Installation Notice

This screen is supplied without a replacement middle frame.

The original device frame must be:

• Structurally straight
• Free from dents and bends
• Free from old adhesive
• Free from glass fragments
• Free from corrosion
• Clean around the bonding surface
• Suitable for accurate screen alignment

A bent, dented, twisted, or damaged frame may prevent the replacement screen from seating correctly.

Installing a replacement screen into a damaged frame may cause:

• Raised screen edges
• Uneven gaps
• Touch problems
• Internal LCD pressure
• White spots
• Display lines
• Screen separation
• Flex-cable stress
• Cracked glass
• Premature failure

Do not force the screen into a bent or damaged frame.

Adhesive and Bonding Notice

A screen supplied without frame must be bonded into the original housing using suitable model-specific screen adhesive.

Proper installation requires:

• Complete removal of old adhesive
• Removal of broken glass and debris
• Cleaning of the frame bonding surface
• Dry fitting before adhesive application
• Correct alignment of the screen
• Correct alignment of the front-camera opening
• Correct flex-cable routing
• Even pressure during curing
• Full testing before permanent bonding

Poor adhesive installation may result in:

• Raised edges
• Uneven gaps
• Dust entry
• Moisture entry
• Screen movement
• Touch problems
• Flex-cable stress
• Premature separation
• Adhesive entering the camera or sensor area

No adhesive, clamps, tools, or installation materials are included unless specifically stated.

Frame Inspection Notice

Before installation, inspect the original frame for:

• Bent corners
• Distorted side rails
• Raised plastic or metal edges
• Old glass fragments
• Adhesive residue
• Corrosion
• Missing brackets
• Damaged screw posts
• Misaligned components
• Debris beneath the panel
• Pressure points around the battery
• Pressure points near the display perimeter

Even minor frame deformation may place damaging pressure against the LCD after installation.

The replacement screen should not be permanently bonded until the frame has been confirmed straight and suitable for reuse.

Battery and Internal-Pressure Notice

Inspect the battery before installing the replacement screen.

Do not continue installation when the battery shows:

• Swelling
• Deformation
• Puncture damage
• Leakage
• Torn wrapping
• Unusual odour
• Excessive heat
• Pressure against the screen

A swollen or damaged battery may cause:

• LCD pressure spots
• Backlight damage
• Cracked glass
• Screen lifting
• Touch failure
• Screen separation
• Short circuits
• Excessive heat
• Fire or chemical hazards
• Logic-board damage

Replace a swollen or physically damaged battery before installing the screen.

Regional and Carrier Compatibility Notice

Moto G Play 2024 XT2413 carrier and regional variants may use different:

• Cellular antenna layouts
• SIM configurations
• Internal brackets
• Connector revisions
• Flex cables
• Supporting components
• Frame details
• Carrier-specific hardware

Before installation, compare:

• Complete XT2413 model number
• Display dimensions
• Flex-cable shape
• Connector position
• Printed part numbers
• Front-camera opening
• Sensor openings
• Frame shape
• Internal clearances

Installing an incompatible display may cause:

• No image
• Failed touch
• Intermittent operation
• Poor fitment
• Connector damage
• Flex-cable damage
• Internal pressure
• Logic-board damage

Model Compatibility Notice

This replacement screen is intended only for the Motorola Moto G Play 2024 within the compatible XT2413 model family.

It is not intended for:

• Moto G Play 2021
• Moto G Play 2023
• Moto G Play 2026
• Moto G Power 5G 2024
• Moto G 5G 2024
• Moto G Pure
• Moto G Stylus
• Other Motorola or Moto G models

Similar external appearance or screen size does not confirm compatibility.

Before ordering, confirm:

• The phone is a Moto G Play 2024.
• The model number begins with XT2413.
• The flex-cable and connector layout match.
• The display dimensions match.
• The front-camera opening is correctly positioned.
• The original frame is suitable for reuse.

Installation Notes

Professional installation is strongly recommended.

Replacing a screen without frame requires controlled heat, precision tools, careful panel removal, frame preparation, adhesive application, and accurate alignment.

Improper handling may damage:

• Refurbished LCD panel
• Backlight layers
• Touchscreen
• Display flex cable
• Logic board
• Battery
• Front camera
• Sensors
• Fingerprint or power-button components
• Charging-port components
• Speakers
• Microphones
• Internal connectors
• Original frame

Before final installation:

• Confirm the complete XT2413 model number.
• Compare the replacement screen with the original display.
• Inspect the replacement glass, LCD, flex cable, and connector.
• Inspect the original frame for bends, dents, corrosion, or debris.
• Confirm that the front-camera opening aligns correctly.
• Inspect the battery for swelling.
• Power off the phone.
• Use controlled heat when removing the damaged display.
• Avoid inserting tools excessively deep.
• Disconnect the battery before connecting or disconnecting the screen.
• Remove all broken glass and old adhesive.
• Clean the frame bonding surface thoroughly.
• Avoid sharply bending, folding, puncturing, or stretching the display flex cable.
• Do not force the connector into place.
• Route the flex cable without pinching or twisting it.
• Dry fit the screen before applying adhesive.
• Test the display before permanent bonding.
• Test black, white, grey, red, green, and blue backgrounds.
• Test brightness at low and high levels.
• Check for backlight bleed and pressure spots.
• Test automatic brightness.
• Test scrolling and 90 Hz operation where available.
• Test touch response across the complete screen.
• Test all edges and corners.
• Test multi-touch gestures.
• Test the front and rear cameras.
• Check the front-camera area for obstruction, dust, or image haze.
• Test proximity sensing.
• Test the earpiece speaker and loudspeaker.
• Test all microphones.
• Test vibration.
• Test the side fingerprint sensor.
• Test the power and volume buttons.
• Test charging and USB connectivity.
• Test Wi-Fi, Bluetooth, cellular reception, and GPS.
• Check for overheating or abnormal battery drain.
• Confirm that the screen sits evenly in the frame.
• Apply suitable adhesive only after all functions have been tested.
• Use even pressure while the adhesive cures.
• Do not permanently seal the phone until compatibility and functionality are confirmed.

Bent connector pins, damaged sockets, torn flex cables, excessive heat, pressure, poor adhesive application, or incorrect alignment may permanently damage the screen or phone.

Water-Resistance Notice

Motorola describes the Moto G Play 2024 as having a water-repellent design, not as a waterproof device.

Opening the phone compromises its original adhesive and protective assembly.

Replacement adhesive may help reduce exposure to dust and incidental moisture, but the original water-repellent performance cannot be restored or guaranteed after repair.

A repaired device should not be relied upon for:

• Swimming
• Showering
• Underwater photography
• Submersion
• Exposure to steam
• Heavy rain
• High-humidity environments
• Other intentional liquid exposure

Sealing performance may be reduced by:

• Frame damage
• Adhesive quality
• Improper cleaning
• Uneven pressure
• Screen variation
• Component misalignment
• Previous repairs
• Corrosion
• Production tolerances

Avoid exposing the repaired device to water, steam, high humidity, or other liquids.

Package Contents

• 1 × Refurbished original replacement screen assembly for Motorola Moto G Play 2024

The following are not included unless specifically stated:

• Middle frame
• Battery
• Front-facing camera
• Earpiece speaker
• Sensors
• Fingerprint sensor
• Display adhesive
• Tools
• Clamps
• Installation materials
• Installation service

Warranty

This component includes a 30-day limited parts-only warranty against confirmed manufacturing or refurbishment defects, subject to the applicable 3C-Easy Markham Component Warranty.

The warranty does not cover:

• Cracked, chipped, scratched, or shattered glass
• Internal LCD damage
• White spots, dark patches, lines, or backlight damage caused by impact or pressure
• Touch failure caused by installation damage
• Damage caused by a bent or damaged frame
• Damage caused by a swollen battery
• Damage caused by excessive adhesive or uneven bonding pressure
• Existing pressure marks consistent with a refurbished panel
• Minor brightness, colour, backlight, or uniformity variation
• Minor cosmetic variation consistent with a refurbished component
• Reduced brightness compared with a new original display
• Refresh-rate differences caused by software, settings, battery condition, or unrelated hardware
• Damage or contamination around the front-camera opening
• Fingerprint problems caused by the original sensor, flex cable, software, or unrelated hardware
• Torn, folded, punctured, stretched, or damaged flex cables
• Bent connector pins or damaged logic-board sockets
• Incorrect model, carrier version, or revision selection
• Installation in an incompatible device
• Improper installation
• Physical, impact, pressure, bending, or twisting damage
• Liquid, moisture, or corrosion damage
• Damage caused by excessive heat
• Adhesive or sealing failure
• Water-repellent or sealing limitations
• Display faults caused by the logic board
• Software, Android, calibration, or compatibility limitations
• Damage to the battery, frame, camera, or other components during installation
• Labour, diagnostics, installation, removal, shipping, or related repair costs

The screen must be connected and fully tested before permanent installation.

Remove protective films only after confirming correct image, touch, brightness, backlight uniformity, refresh-rate operation, compatibility, camera-opening alignment, and fitment.

Screens showing installation marks, adhesive residue, flex-cable damage, internal pressure damage, or other physical damage may not qualify for warranty coverage.

Important Notes

• Refurbished original replacement screen for Motorola Moto G Play 2024.
• Intended for compatible XT2413 model variants.
• Officially identified North American variants include XT2413-2 and XT2413V.
• Supplied without middle frame.
• Confirm the complete model number before ordering.
• Confirm the flex-cable and connector layout before installation.
• Confirm the front-camera opening matches the original screen.
• This screen is not intended for the Moto G Play 2023 or another Moto G model.
• Uses an original Motorola LCD panel with refurbished outer glass and related materials.
• The original display is 6.5 inches with HD+ resolution and refresh rates up to 90 Hz.
• This is not a brand-new Motorola service display.
• Minor cosmetic, brightness, colour, backlight, refresh-rate, or uniformity variation may be present.
• The original frame must be straight, clean, and suitable for reuse.
• Screen adhesive is not included unless specifically stated.
• No tools or installation materials are included.
• Inspect the battery for swelling before installation.
• Test image, touch, brightness, backlight uniformity, refresh rate, cameras, sensors, fingerprint recognition, charging, audio, vibration, and connectivity before permanent bonding.
• Original water-repellent performance cannot be restored or guaranteed after repair.
• Professional installation is strongly recommended.
• Product appearance, markings, glass finish, flex layout, refurbishment quality, and packaging may vary between production batches.

Motorola, Moto G, Android, Corning, Gorilla Glass, and related trademarks belong to their respective owners and are used only to identify product compatibility. 3C-Easy Markham is not affiliated with or endorsed by Motorola Mobility LLC.