Replacement Back Camera Module for Apple iPhone 14 Series
Restore rear-camera photography, video recording, autofocus, stabilization, and related imaging functions on a compatible Apple iPhone 14 series device with this replacement back camera module.
This internal camera assembly replaces a damaged or malfunctioning factory rear-camera module. Depending on the selected model, the assembly may include two or three integrated camera units responsible for standard, ultra-wide, telephoto, macro, low-light, and video functions.
The iPhone 14 and iPhone 14 Plus use a dual-camera system, while the iPhone 14 Pro and iPhone 14 Pro Max use a larger Pro-series triple-camera system.
Important: The back camera modules for the iPhone 14, iPhone 14 Plus, iPhone 14 Pro, and iPhone 14 Pro Max are different and are not interchangeable. Confirm the exact model number and compare the replacement module with the original camera assembly before ordering.
Compatible Models
Choose the replacement option that matches the exact device.
Apple iPhone 14
Compatible model numbers:
- A2649
- A2881
- A2882
- A2883
- A2884
Camera system:
- Main camera
- Ultra-wide camera
Apple iPhone 14 Plus
Compatible model numbers:
- A2632
- A2885
- A2886
- A2887
- A2888
Camera system:
- Main camera
- Ultra-wide camera
Apple iPhone 14 Pro
Compatible model numbers:
- A2650
- A2889
- A2890
- A2891
- A2892
Camera system:
- Main camera
- Ultra-wide camera
- Telephoto camera
Apple iPhone 14 Pro Max
Compatible model numbers:
- A2651
- A2893
- A2894
- A2895
- A2896
Camera system:
- Main camera
- Ultra-wide camera
- Telephoto camera
Please verify the exact model number under Settings > General > About before ordering.
The four camera modules are not interchangeable.
Available Options
Select the exact replacement required:
- Replacement back camera module for iPhone 14
- Replacement back camera module for iPhone 14 Plus
- Replacement back camera module for iPhone 14 Pro
- Replacement back camera module for iPhone 14 Pro Max
Product appearance, flex-cable markings, connector finish, lens construction, frame colour, production codes, and packaging may vary by supplier or production batch.
Key Features
- Replacement rear-camera module
- Designed for the selected Apple iPhone 14 series model
- Integrated camera assembly
- May restore rear-camera image and video functions
- May restore autofocus
- May restore optical stabilization where supported
- May restore ultra-wide photography
- May restore telephoto photography on Pro models
- May restore macro photography on supported Pro models
- May resolve shaking, blurring, focus failure, or black-screen camera faults
- Precision-shaped module for the selected device
- Suitable for professional repair technicians and experienced installers
- Tested or inspected before shipment when applicable
- 30-day limited parts-only warranty
Common Back Camera Failure Symptoms
Replacement may be appropriate when the device:
- Shows a black screen in the Camera app
- Displays a blurred rear-camera image
- Cannot focus correctly
- Continuously hunts for focus
- Produces shaking or vibrating images
- Makes clicking or rattling sounds while the camera is active
- Shows image distortion
- Produces spots, lines, or abnormal colours
- Has one camera mode that no longer works
- Cannot switch between rear-camera lenses
- Crashes or freezes when opening the Camera app
- Produces unusually soft photographs
- Records unstable or unusable video
- Has damaged camera flex cables
- Has cracked or physically damaged internal camera lenses
- Displays a camera-related warning after previous repair
- Has rear-camera failure after impact or liquid exposure
- Produces a black screen only in certain zoom ranges
- Has failed autofocus following a drop
- Has stabilization failure after impact
- Cannot scan QR codes or documents reliably
- Cannot use macro mode correctly on supported Pro models
- Has telephoto failure on the iPhone 14 Pro or 14 Pro Max
These symptoms do not always confirm that the rear-camera module is defective.
Diagnosis Before Replacement
Rear-camera problems may also be caused by:
- Cracked external camera lens glass
- Dirt, oil, or condensation over the external camera cover
- Logic-board damage
- Damaged camera connectors
- Bent or missing connector pins
- Liquid ingress
- Corrosion
- Software problems
- iOS camera errors
- Damaged flash or microphone components
- Damaged LiDAR hardware on Pro models
- Housing deformation
- Previous repair damage
- Magnetic interference
- Incompatible phone cases or accessories
- Defective replacement back glass or camera-lens covers
- Damage to another camera in the integrated module
Before replacing the camera module:
- Clean the external camera lenses.
- Remove the phone case and magnetic accessories.
- Test all available camera modes.
- Test all zoom ranges.
- Test photo and video recording.
- Restart the phone.
- Check for available iOS updates.
- Inspect the camera connectors and logic-board sockets.
- Check for impact, liquid, or corrosion damage.
- Confirm that the external camera-lens glass is clear and correctly installed.
Proper diagnosis is recommended before ordering or installing this component.
Camera-System Differences
iPhone 14 and iPhone 14 Plus
The standard iPhone 14 models use a dual-camera arrangement consisting of:
- Main camera
- Ultra-wide camera
These models do not include the separate telephoto camera or LiDAR scanner found on the Pro models.
A replacement module may restore functions including:
- Standard photography
- Ultra-wide photography
- Portrait mode
- Night mode
- Video recording
- Cinematic mode
- Autofocus
- Image stabilization
- QR-code scanning
- Document scanning
iPhone 14 Pro and iPhone 14 Pro Max
The Pro models use a larger triple-camera system consisting of:
- Main camera
- Ultra-wide camera
- Telephoto camera
The device also includes a separate LiDAR scanner located in the rear-camera area.
A replacement camera module may restore functions including:
- Standard photography
- Ultra-wide photography
- Telephoto photography
- Macro photography
- Portrait mode
- Night mode
- ProRAW photography
- ProRes video
- Cinematic mode
- Autofocus
- Image stabilization
- QR-code scanning
- Document scanning
The replacement camera module does not normally include the separate LiDAR scanner, flash, rear microphone, camera-lens cover, or external camera glass unless expressly stated.
Autofocus Notice
The rear-camera system uses internal focusing mechanisms to produce clear images at different distances.
Autofocus problems may include:
- Constant focus hunting
- Failure to focus at close range
- Failure to focus at distance
- Blurred photographs
- Clicking or vibrating sounds
- Focus changing without user input
- One camera lens focusing correctly while another fails
Autofocus performance may also be affected by:
- Dirty external lens glass
- Cracked camera-lens glass
- Magnetic accessories
- Severe housing damage
- Software issues
- Low-light conditions
- Incorrect camera-module seating
- Logic-board faults
A camera replacement will not resolve autofocus problems caused by an obstructed or damaged external camera cover.
Optical Stabilization Notice
The rear-camera assembly may include optical or sensor-shift stabilization mechanisms depending on the selected model and camera lens.
Symptoms of stabilization failure may include:
- Shaking camera preview
- Vibrating image
- Clicking or buzzing sounds
- Blurred photographs
- Unstable video
- Image movement while the phone is stationary
Stabilization mechanisms are sensitive to:
- Severe impact
- Repeated vibration
- Magnetic interference
- Improper handling
- Excessive pressure
- Shipping damage
- Incorrect installation
Avoid exposing the replacement module to unnecessary impact, vibration, magnetic tools, or pressure.
Ultra-Wide Camera Notice
All listed iPhone 14 series models include an ultra-wide camera.
A failed ultra-wide camera may cause:
- Black screen at the ultra-wide zoom setting
- Blurry ultra-wide images
- Distorted image
- Failure to switch between lenses
- Camera-app freezing
- Poor low-light performance
- Macro mode failure on supported Pro models
The ultra-wide camera is integrated into the rear-camera module and is not normally replaced separately.
Telephoto Camera Notice
The iPhone 14 Pro and iPhone 14 Pro Max include an integrated telephoto camera.
The iPhone 14 and iPhone 14 Plus do not include a separate telephoto camera.
Telephoto-camera problems may include:
- Black screen at telephoto zoom
- Failure to switch to the telephoto lens
- Blurry zoom photographs
- Focus failure
- Image shaking
- Camera-app freezing
- Automatic switching back to another lens
Lighting, subject distance, and iOS processing may cause the phone to use digital cropping or another camera instead of the telephoto lens in some conditions. This behaviour does not necessarily indicate a defect.
Macro Photography Notice
Macro photography is supported through the ultra-wide camera system on the iPhone 14 Pro and iPhone 14 Pro Max.
Macro problems may include:
- Failure to focus at close range
- Black screen during macro use
- Blurred close-up photographs
- Unstable lens switching
- Failure of automatic macro switching
The iPhone 14 and iPhone 14 Plus do not provide the same dedicated macro-camera behaviour as the Pro models.
Macro performance can also depend on:
- Lighting
- Subject distance
- Camera settings
- iOS
- External lens cleanliness
- Protective camera covers
- Replacement-camera calibration
Portrait and Depth-Effect Notice
Portrait mode relies on camera data, image processing, subject distance, lighting, and software.
On Pro models, LiDAR may assist certain depth-related and low-light functions, but the LiDAR scanner is generally separate from the camera module.
A rear-camera replacement may not resolve Portrait mode or depth problems caused by:
- LiDAR failure
- Logic-board faults
- Software issues
- Low-light conditions
- Incorrect subject distance
- Camera calibration problems
- Obstruction from a lens protector
- Damage to another rear component
LiDAR Notice for Pro Models
The iPhone 14 Pro and iPhone 14 Pro Max include a LiDAR scanner in the rear-camera area.
The replacement back camera module does not normally include the LiDAR scanner unless expressly stated.
Replacing the camera module will not repair:
- A defective LiDAR scanner
- LiDAR connector damage
- Logic-board LiDAR faults
- Augmented-reality problems caused by another component
- Depth-measuring faults unrelated to the camera module
After installation on a Pro model, test:
- Portrait mode
- Measure app
- Low-light focus
- Augmented-reality applications
- Camera switching
- Macro and telephoto functions
Flash and Rear Microphone Notice
The rear flash and rear microphone are separate from the back camera module on many device configurations.
A replacement camera module will not necessarily repair:
- Flash failure
- Flash synchronization problems
- Rear microphone failure
- Distorted video audio
- LiDAR failure
- Damaged external lens glass
Confirm which component is defective before ordering.
Replacement Component Quality Notes
Unless expressly identified as genuine, original, refurbished original, or pulled original, this product should be treated as a replacement camera module.
Replacement modules may differ from the factory-installed camera in:
- Printed markings
- Flex-cable colour
- Connector finish
- Lens coating
- Internal calibration
- Image processing behaviour
- Focus response
- Stabilization performance
- Low-light performance
- Colour reproduction
- Production code
- Packaging
Minor visual differences do not necessarily indicate incompatibility, but the module shape, connector layout, and intended model must match the original component.
Image Quality Notice
A replacement camera is intended to restore usable photography and video functions.
However, differences from the original factory camera may include:
- Colour temperature
- White balance
- Sharpness
- Contrast
- HDR processing
- Low-light performance
- Focus speed
- Stabilization behaviour
- Lens switching
- Exposure
- Noise reduction
- Video quality
- Portrait processing
- Macro performance
- Telephoto performance
Exact factory-original image quality cannot be guaranteed unless the component is expressly identified and verified as a genuine Apple camera module and the repair is completed using the applicable Apple calibration process.
Apple Camera Notification and Parts History
Apple may record a camera replacement in Settings > General > About > Parts and Service History.
Depending on the part, iOS version, installation procedure, and calibration status, the device may display:
- Genuine
- Used
- Unknown
- Finish Repair
- Unable to Verify
- Another camera-related message
A message may appear when:
- The camera is aftermarket
- The camera was previously installed in another device
- The part cannot be verified
- Calibration has not been completed
- The installation is incomplete
- The camera is not communicating correctly
- The device or part does not support the required repair process
A camera-related notification does not necessarily mean that the camera cannot take photographs, but certain functions or performance may be affected.
Repair Assistant and Calibration Notice
Apple’s Repair Assistant may be required or recommended to complete calibration after installation of a supported camera part.
Repair Assistant installs calibration data and completes supported repair procedures.
Availability and results depend on:
- Device model
- iOS version
- Camera type
- Whether the part is genuine, used, or aftermarket
- Part eligibility
- Internet connection
- Apple system availability
- Repair history
- Device condition
An aftermarket camera may not qualify for Apple calibration or may not be recognized as a genuine part.
Repair Assistant, Apple calibration, programming, and software configuration are not included with this component.
Used or Previously Installed Camera Notice
A genuine camera removed from another compatible iPhone may be recognized as a used part where supported.
Depending on the device and iOS version:
- The camera may appear as Used
- Repair Assistant may be required
- Calibration may be available
- Some functions may remain limited
- The part may appear in Parts and Service History
- The camera may not be accepted if incompatible or damaged
Compatibility does not guarantee successful Apple calibration.
Installation Difficulty
Back camera replacement is an advanced internal repair.
The procedure generally requires:
- Opening the display assembly
- Disconnecting the battery
- Removing camera brackets
- Disconnecting delicate camera flex cables
- Handling multiple screws of different lengths
- Protecting the exposed camera lenses
- Avoiding damage to the logic-board sockets
- Maintaining correct grounding and bracket placement
- Replacing the display seal before final assembly
Professional installation is strongly recommended.
Installation Notes
Before installation:
- Confirm the exact iPhone model.
- Compare the replacement module with the original camera.
- Confirm the number and position of the camera lenses.
- Inspect all flex cables and connectors.
- Check the replacement lenses for dust, scratches, or damage.
- Test the original phone functions where possible.
- Power off the device.
- Disconnect the battery before connecting or disconnecting the camera.
- Inspect the logic-board camera sockets.
- Check the housing and external lens glass for damage.
During installation:
- Use controlled heat and appropriate opening tools.
- Avoid damaging the display flex cables.
- Keep all screws organized by exact location.
- Remove the camera bracket carefully.
- Disconnect camera connectors using suitable non-metal tools.
- Do not touch the camera lenses with bare fingers.
- Do not bend, twist, or puncture the flex cables.
- Keep dust away from the lenses and sensor openings.
- Align each connector carefully.
- Do not force connectors into place.
- Reinstall all brackets and screws in their original locations.
- Confirm that the camera module sits flat in the housing.
- Test the camera before resealing the device.
Incorrect screw placement or excessive force may damage the camera module, flex cables, logic-board sockets, or other internal components.
Testing Requirements
Test the replacement camera fully before final assembly.
Verify:
- Camera app opens normally
- Main camera image
- Ultra-wide camera image
- Telephoto camera image on Pro models
- Front-to-rear camera switching
- All available zoom settings
- Autofocus
- Close-range focus
- Distance focus
- Optical stabilization
- Photo capture
- Video recording
- Portrait mode
- Night mode
- Cinematic mode
- Macro mode on supported Pro models
- Flash synchronization
- QR-code scanning
- Document scanning
- Image stabilization
- No abnormal clicking, shaking, or buzzing
- No black screens
- No camera-app freezing
- No visible dust or spots in captured images
On Pro models, also test:
- Telephoto photography
- Macro photography
- ProRAW where applicable
- ProRes video where applicable
- LiDAR-assisted features
- Measure app
- Augmented-reality functions
Do not seal the phone until all camera functions have been tested.
Dust and Contamination Notice
Camera modules are sensitive to dust, fingerprints, oil, and moisture.
Contamination may cause:
- Blurry images
- Spots in photographs
- Glare
- Haze
- Poor low-light performance
- Flash reflections
- Focus problems
- Reduced contrast
Keep all camera lenses, the inside of the camera-lens cover, and the surrounding housing clean during installation.
Do not use aggressive cleaners directly on the camera module.
External Camera-Lens Glass Notice
The back camera module is located beneath the external camera-lens glass.
This listing does not include the external lens glass unless expressly stated.
A damaged external camera cover may cause:
- Blurred images
- Glare
- Light streaks
- Focus problems
- Dust ingress
- Moisture ingress
- Poor night photography
- Flash reflection
Replace or clean damaged external camera-lens glass before concluding that the internal camera module is defective.
Magnetic Interference Notice
Camera stabilization and autofocus mechanisms may be affected by strong magnets or magnetic accessories positioned near the rear-camera system.
Possible sources include:
- Magnetic cases
- Vehicle mounts
- Magnetic rings
- Large speakers
- Industrial magnets
- Improperly positioned accessories
Remove magnetic accessories when diagnosing shaking, focusing, or stabilization problems.
Liquid and Corrosion Notice
Rear-camera modules may be damaged by:
- Liquid ingress
- Condensation
- Corrosion
- Cleaning chemicals
- Moisture trapped beneath cracked lens glass
- Previous liquid exposure
If liquid or corrosion is present, inspect the complete device.
Replacing only the camera module may not provide a lasting repair when corrosion has spread to:
- Logic-board connectors
- Camera sockets
- Flash components
- LiDAR components
- Rear microphone
- Other internal circuits
Liquid-damaged devices may develop additional faults after repair.
Water-Resistance Notice
Opening the iPhone compromises the original factory seal.
A replacement display adhesive gasket may help reduce exposure to dust and incidental moisture, but original factory water resistance cannot be restored or guaranteed after repair.
Avoid exposing the repaired device to:
- Water
- Rain
- Steam
- High humidity
- Condensation
- Swimming pools
- Showers
- Liquid spills
Liquid damage is not covered by the component warranty.
No Tools or Adhesive Included
This listing includes the selected replacement back camera module only unless expressly stated otherwise.
The following are not included:
- Phone
- External camera-lens glass
- Camera-lens protector
- LiDAR scanner
- Rear flash
- Rear microphone
- Camera bracket
- Screws
- Repair tools
- Display adhesive
- Replacement water-resistant seal
- Programming equipment
- Calibration service
- Installation service
- Diagnostic service
Any small parts visible in product photographs should be confirmed against the selected option before ordering.
30-Day Limited Parts-Only Warranty
This replacement camera module includes a 30-day limited parts-only warranty against confirmed manufacturing defects, subject to the applicable 3C-Easy Markham Component Warranty.
The warranty does not cover:
- Installation labour
- Removal labour
- Diagnostic fees
- Calibration fees
- Programming fees
- Shipping costs
- Damage to the phone
- Data loss
- Incorrect model selection
- Incorrect installation
- Torn, folded, punctured, stretched, or damaged flex cables
- Damaged connectors
- Bent or missing connector pins
- Scratched or contaminated camera lenses
- Dust introduced during installation
- Damage caused by impact or pressure
- Damage caused by magnetic interference
- Damage caused by excessive heat
- Damage caused by forceful installation
- Liquid, moisture, or corrosion damage
- Damage caused by a cracked external camera cover
- Logic-board or camera-circuit faults
- LiDAR faults
- Flash or microphone faults
- Software or calibration limitations
- Apple camera notifications
- Parts and Service History entries
- Repair Assistant incompatibility
- Differences from factory image quality
- Minor colour, exposure, or focus variation
- Damage caused during removal or testing
- Components showing evidence of improper installation
- Removed, altered, or damaged warranty markings
The camera must be connected and fully tested before final installation.
Warranty coverage applies only to the replacement component and does not include labour, calibration, programming, device damage, or related repair costs.
Important Notes
- Replacement back camera module for Apple iPhone 14 series
- Separate options for iPhone 14, 14 Plus, 14 Pro, and 14 Pro Max
- The four camera modules are not interchangeable
- iPhone 14 and 14 Plus use dual-camera modules
- iPhone 14 Pro and 14 Pro Max use triple-camera modules
- LiDAR scanner is not normally included
- External camera-lens glass is not included
- Confirm the exact model number before ordering
- May restore image, video, autofocus, and stabilization functions
- May restore ultra-wide, telephoto, or macro functions where supported
- Will not repair logic-board, LiDAR, flash, microphone, or software faults
- Apple camera notifications or Parts and Service History entries may appear
- Repair Assistant or calibration may be required or recommended
- Aftermarket parts may not qualify for Apple calibration
- Advanced internal disassembly is required
- Professional installation is strongly recommended
- Test all camera modes before final assembly
- No tools or adhesive included
- Water resistance cannot be guaranteed after repair
- Product appearance and markings may vary by production batch
Intellectual Property Disclaimer
Apple, iPhone, iOS, Camera, Cinematic mode, ProRAW, ProRes, LiDAR, Repair Assistant, and related names, logos, and trademarks belong to Apple Inc.
3C-Easy Markham is not affiliated with, authorized by, sponsored by, or endorsed by Apple Inc.
All product names and model references are used solely to identify product compatibility.
files/Replacement-Back-Camera-Module-for-Apple-iPhone-14_-14-Plus_-14-Pro-and-14-Pro-Max-3C-Easy-Markham-127420141.png
files/Replacement-Back-Camera-Module-for-Apple-iPhone-14_-14-Plus_-14-Pro-and-14-Pro-Max-3C-Easy-Markham-127420244.png
files/Replacement-Back-Camera-Module-for-Apple-iPhone-14_-14-Plus_-14-Pro-and-14-Pro-Max-3C-Easy-Markham-127420393.png
files/Replacement-Back-Camera-Module-for-Apple-iPhone-14_-14-Plus_-14-Pro-and-14-Pro-Max-3C-Easy-Markham-127420413.png
