Replacement Charging Port Daughter Board Compatible with Samsung Galaxy S23 FE 5G

Replacement USB-C Charging Port Daughter Board for Samsung Galaxy S23 FE 5G

Restore wired charging, USB data connectivity, and applicable lower-board functions on a compatible Samsung Galaxy S23 FE 5G with this replacement charging-port daughter board.

This internal component contains the USB Type-C charging connector mounted to a model-specific lower daughter board. Depending on the selected regional version and production revision, the board may also contain or interface with:

• Primary lower microphone
• Main-board interconnect socket
• Coaxial antenna sockets
• Antenna spring contacts
• USB data circuitry
• Charging-support circuitry
• Grounding contacts
• Other lower-board components

Separate versions are available for:

• US and Canadian Galaxy S23 FE models
• International Galaxy S23 FE models

The North American and international boards are physically or electrically different and should not be treated as interchangeable.

Important: Select the board according to the phone’s complete model number, not merely the Galaxy S23 FE product name.

Compatible Models

Choose the daughter board designed for the exact regional version.

US and Canadian Version

Compatible with supported North American Galaxy S23 FE models, including:

• Samsung Galaxy S23 FE 5G
• SM-S711U – United States carrier version
• SM-S711U1 – United States factory-unlocked version
• SM-S711W – Canadian version

US and Canadian variants may use closely related hardware, but carrier, antenna, mmWave, board-revision, and production differences may still exist.

Before installation, compare the replacement board with the original.

International Version

Compatible with supported international Galaxy S23 FE models, including:

• Samsung Galaxy S23 FE 5G
• SM-S711B
• SM-S711B/DS – International dual-SIM version

The international SM-S711B family generally uses a different hardware platform and daughter-board configuration from North American SM-S711U, SM-S711U1, and SM-S711W devices.

Other Regional Models

This listing should not automatically be assumed compatible with:

• SM-S7110
• SM-S711N
• Other regional or carrier-specific SM-S711 variants

These versions may use different:

• Board layouts
• Antenna contacts
• Coaxial sockets
• SIM configurations
• Radio-frequency components
• Main-board connectors
• Charging circuitry
• Production revisions

Compatibility with another regional model must be independently confirmed by comparing the original board.

How to Confirm the Model Number

The complete model number can normally be found under:

Settings > About phone > Model name / Model number

It may also appear:

• On the original device packaging
• Through the carrier account
• On the purchase receipt
• On internal product labels
• Through Samsung diagnostic software
• On the rear housing label in certain regions

Do not order solely by:

• Phone colour
• Storage capacity
• Carrier name
• Processor name
• External appearance
• The general “Galaxy S23 FE” product name

Not Compatible With

This component is not compatible with:

• Samsung Galaxy S23
• Samsung Galaxy S23+
• Samsung Galaxy S23 Ultra
• Samsung Galaxy S24 FE
• Samsung Galaxy S21 FE
• Samsung Galaxy S22 series
• Other Samsung Galaxy models

It is also not safe to assume interchangeability between:

• SM-S711U and SM-S711B
• SM-S711W and SM-S711B
• North American and international boards
• Galaxy S23 FE and standard Galaxy S23 boards

Similar USB-C connector shapes do not establish complete board compatibility.

Available Options

Select one of the following:

• US / Canadian Version – SM-S711U, SM-S711U1 and SM-S711W
• International Version – SM-S711B and SM-S711B/DS

Each option includes one regional charging-port daughter board.

The exact supported board revisions may vary according to current inventory.

Before installation, compare:

• Printed board number
• USB-C connector orientation
• Overall board shape
• Screw-hole placement
• Interconnect socket
• Coaxial sockets
• Antenna contacts
• Microphone position
• Component layout
• Frame alignment
• SIM-related openings

Do not install the board if it differs materially from the original.

North American and International Board Differences

The Galaxy S23 FE was produced with different regional hardware configurations.

North American versions generally include:

• SM-S711U
• SM-S711U1
• SM-S711W
• Snapdragon-based main hardware platform
• Region-specific antenna and cellular configuration

International versions commonly include:

• SM-S711B
• SM-S711B/DS
• Exynos-based main hardware platform
• International radio and SIM configuration

These differences may affect:

• Main-board interconnect compatibility
• Charging communication
• Antenna routing
• Coaxial cable placement
• Microphone circuitry
• USB data operation
• Cellular reception
• Board dimensions
• Component arrangement
• Diagnostic behaviour

A board that physically fits may still produce incomplete or unstable operation if it is intended for a different region.

Product Type

This listing is for a charging-port daughter-board assembly.

It may also be described as:

• USB-C charging board
• Charging sub-board
• Lower daughter board
• Dock connector board
• USB charging flex board
• Charging-port PCB
• Bottom board
• USB Type-C board

The USB-C connector is soldered directly to the daughter board.

The complete board is normally replaced when the original USB-C port is mechanically or electrically damaged.

Component-level replacement of only the USB-C connector requires specialized microsoldering equipment and repair skill.

Package Contents

This listing generally includes:

• One selected regional replacement daughter board
• One pre-soldered USB Type-C charging connector
• Installed board-level components as supplied

Depending on the exact version, the board may include:

• Primary microphone
• Main-board interconnect socket
• Coaxial antenna sockets
• Antenna spring contacts
• USB and charging-support components
• Grounding contacts
• Other surface-mounted circuitry

The following are not included unless expressly stated:

• Samsung Galaxy S23 FE phone
• Main logic board
• Battery
• Loudspeaker
• Wireless-charging coil
• NFC antenna
• USB-C charging cable
• Wall charger
• Main-board interconnect flex cable
• Coaxial antenna cables
• SIM tray
• Rear-cover adhesive
• Repair tools
• Installation service
• Diagnostic service

Components shown in generic photographs should not be assumed included unless specifically identified.

Key Features

• Replacement USB-C charging-port daughter board
• Designed for Samsung Galaxy S23 FE 5G
• Separate North American and international versions
• US compatibility for supported SM-S711U and SM-S711U1 models
• Canadian compatibility for supported SM-S711W models
• International compatibility for supported SM-S711B and SM-S711B/DS models
• USB Type-C connector pre-soldered to the board
• Designed to restore compatible wired charging
• Designed to restore compatible USB data transfer
• Supports applicable Samsung Super Fast Charging
• May restore computer recognition
• May restore wired Android Auto connectivity
• May include primary lower microphone
• May include antenna and interconnect contacts
• Advanced internal installation required
• Professional diagnosis strongly recommended
• No tools or adhesive included
• 30-day limited parts-only warranty

Common Charging-Port Failure Symptoms

Replacement may be appropriate when the phone:

• Does not charge through USB-C
• Charges only when the cable is held at an angle
• Disconnects when the cable moves
• Has a physically loose charging port
• Has bent or missing USB-C contacts
• Has a broken connector tongue
• Shows intermittent wired charging
• Charges unusually slowly with known-good equipment
• Does not recognize a USB cable
• Is not detected by a computer
• Cannot transfer files by USB
• Repeatedly disconnects from Android Auto
• Shows a moisture or debris warning after the port is confirmed clean and dry
• Has corrosion on the lower daughter board
• Has a failed lower microphone
• Has damaged coaxial or interconnect sockets
• Has a USB-C connector separated from the board
• Has physical damage caused by a foreign object

Similar symptoms may be caused by other components.

Proper diagnosis is recommended before board replacement.

Functions This Board May Restore

A correct and functional replacement board may restore:

• Standard wired charging
• Fast charging
• Samsung Super Fast Charging
• USB Power Delivery communication
• USB data transfer
• Computer detection
• Android Auto connection
• USB accessory recognition
• Supported wired audio accessories
• Primary lower microphone function
• Certain lower antenna connections
• Stable cable retention

Successful repair depends on the condition of the rest of the device.

Functions This Board May Not Restore

Daughter-board replacement may not solve a problem caused by:

• Damaged USB-C cable
• Defective power adapter
• Incompatible charger
• Compacted debris in the port
• Moisture inside the phone
• Battery failure
• Main-board charging failure
• Power-management IC failure
• USB controller failure
• Main-board short circuit
• Damaged interconnect flex cable
• Damaged main-board connector
• Liquid-damaged main board
• Software problem
• Excessive device temperature
• Failed wireless-charging coil
• Antenna-cable damage
• Baseband or cellular-radio failure
• Incorrect regional daughter board

Do not assume that every charging symptom originates from the USB-C port.

Galaxy S23 FE Charging Capability

The Samsung Galaxy S23 FE supports wired Samsung Super Fast Charging up to 25W when all required conditions are met.

A compatible charging setup generally requires:

• USB Power Delivery power adapter
• PPS charging support
• Suitable USB-C cable
• Fast charging enabled in device settings
• Battery temperature within the permitted range
• Battery percentage low enough to accept higher charging power
• Properly functioning battery
• Properly functioning main-board charging circuitry
• Correct regional daughter board

Installing a replacement board does not increase the phone beyond its original charging capability.

Charging-Speed Notice

The Galaxy S23 FE does not necessarily draw 25W continuously.

Charging speed changes according to:

• Battery percentage
• Battery temperature
• Device temperature
• Screen activity
• Background applications
• Charger output
• USB cable quality
• Software
• Battery condition
• Charging settings
• Main-board condition

The device may reduce charging power as the battery becomes full.

A phone charging below 25W does not automatically indicate a defective daughter board.

Super Fast Charging Requirements

To obtain the supported Samsung charging indication, use:

• Compatible USB PD PPS adapter
• Suitable USB-C to USB-C cable
• Known-good charging equipment
• Charging settings enabled
• Battery and phone within safe temperature limits

A charger advertised only as “fast charging” may not support PPS.

A damaged or low-quality cable may cause:

• Slow charging
• Intermittent charging
• Connection failure
• Excessive heat
• No Super Fast Charging indication

Test the repaired phone with more than one known-good charger and cable.

USB Data Transfer

The daughter board participates in wired USB data communication.

Replacement may be appropriate when the phone:

• Charges but is not recognized by a computer
• Disconnects during file transfer
• Cannot enter USB data mode
• Cannot connect to wired Android Auto
• Does not recognize supported USB accessories

USB data problems may also be caused by:

• Charge-only cable
• Damaged cable
• Computer USB-port failure
• Driver issue
• USB security settings
• Main-board fault
• Interconnect flex damage
• Software problem
• Incorrect regional board

Use a known-good data-capable cable during testing.

Android Auto Compatibility

A functioning USB data connection may be necessary for wired Android Auto.

Daughter-board replacement may restore Android Auto when the original port has:

• Worn data contacts
• Corroded contacts
• Intermittent pins
• Physical damage
• Loose connection

Android Auto problems may also arise from:

• Unsupported USB cable
• Vehicle USB-port damage
• Vehicle software
• Phone software
• Application permissions
• Connection settings
• Main-board USB failure

The replacement board does not guarantee compatibility with every vehicle or infotainment system.

USB Accessory Compatibility

A functioning daughter board may support compatible USB accessories such as:

• USB flash drives
• USB-C hubs
• Data cables
• Wired audio adapters
• Diagnostic interfaces
• Computer connections

Accessory recognition also depends on:

• Phone software
• Accessory power requirements
• USB standards
• Adapter compatibility
• Main-board condition
• Regional hardware configuration

The daughter board does not add unsupported USB features to the phone.

Charging-Port Inspection

Before replacing the board, inspect the existing USB-C port for:

• Pocket lint
• Dirt
• Dust
• Corrosion
• Bent contacts
• Missing contacts
• Burn marks
• Liquid residue
• Cracked connector tongue
• Excessive movement
• Foreign objects
• Damaged solder joints

Compacted lint may prevent full cable insertion while the port itself remains electrically functional.

Do not use sharp metal objects inside a powered USB-C port.

Improper cleaning may:

• Bend contacts
• Short the connector
• Damage the centre tongue
• Push debris deeper
• Damage charging circuitry
• Create a fire hazard

Power off the phone before internal cleaning or inspection.

Moisture-Detection Warning

Samsung devices may display a moisture or foreign-material warning when abnormal electrical conditions are detected at the USB-C connection.

Possible causes include:

• Actual moisture
• Corrosion
• Conductive debris
• Damaged USB-C contacts
• Contaminated connector
• Failed daughter-board circuitry
• Damaged interconnect flex cable
• Main-board fault
• Software state

Do not bypass a genuine moisture warning simply to force charging.

A replacement daughter board may not resolve a warning caused elsewhere in the device.

Integrated Microphone Notice

Depending on the exact regional version and board revision, the primary lower microphone may be integrated into the daughter board.

Board replacement may restore microphone operation when the original board-level microphone has failed.

Possible microphone symptoms include:

• Callers cannot hear the user
• Voice recordings are silent
• Audio sounds muffled
• Audio sounds distorted
• Microphone cuts in and out
• Microphone stopped working after liquid exposure
• Bottom microphone was damaged during port cleaning

Microphone issues may also be caused by:

• Blocked acoustic opening
• Damaged microphone mesh
• Missing acoustic gasket
• Phone case obstruction
• Software
• Main-board audio circuit
• Another microphone
• Incorrect regional board
• Improper installation

Confirm the supplied board’s microphone configuration before installation.

Microphone Acoustic Seal

Proper microphone performance may depend on a gasket, mesh, or acoustic channel between the daughter board and phone frame.

If this component is:

• Missing
• Torn
• Misaligned
• Blocked
• Contaminated
• Compressed incorrectly

the microphone may sound:

• Quiet
• Muffled
• Distorted
• Echoed
• Inconsistent

Transfer the original acoustic components where required and safe to do so.

Antenna and Cellular Considerations

The lower board may include antenna contacts or coaxial-cable sockets used by the device’s radio system.

Regional board differences may affect:

• Cellular reception
• 5G operation
• LTE operation
• Antenna tuning
• Signal stability
• Call quality
• Mobile data
• Carrier compatibility

Improper installation may produce:

• Weak signal
• No service
• Intermittent reception
• Reduced data speeds
• Antenna diagnostic faults

Carefully inspect and reconnect:

• Coaxial antenna cables
• Spring contacts
• Grounding points
• Interconnect connectors
• Loudspeaker contacts
• Frame contacts

A charging-board replacement cannot repair:

• Damaged modem
• Baseband failure
• Main-board radio fault
• Broken antenna cable
• Carrier lock
• Blacklisted IMEI
• Unsupported network bands

North American Antenna Configuration

US and Canadian models may use region-specific radio and antenna layouts.

Possible differences may include:

• Additional antenna contacts
• Carrier-specific RF components
• mmWave-related hardware on certain US configurations
• Different coaxial cable routing
• Different grounding points
• Different board revision numbers

A North American board should not be replaced with an international board merely because the USB-C port appears to align.

International Dual-SIM Configuration

SM-S711B/DS identifies an international dual-SIM version.

The charging-port daughter board may interact with model-specific:

• SIM-related hardware
• Antenna routing
• Regional RF components
• Main-board connectors
• Grounding contacts

An SM-S711B/DS board should be matched to the appropriate international hardware family.

Dual-SIM capability itself is not added or removed solely by daughter-board replacement.

Board Quality and Condition

Depending on inventory, the component may be supplied as:

• New aftermarket board
• OEM-specification replacement
• Refurbished original board
• Pulled original board
• Supplier-selected compatible board

Unless expressly identified as a genuine Samsung Service Pack, the component should not be represented as:

• Brand-new genuine Samsung
• Samsung-authorized service component
• Factory-paired part
• Genuine Samsung Service Pack

The exact condition and grade should be determined from the selected inventory option.

New Aftermarket Board

A new aftermarket board generally uses newly manufactured materials and components.

Potential variation may occur in:

• USB-C connector quality
• Microphone performance
• Charging communication
• Data-transfer stability
• Antenna contacts
• Component layout
• Printed markings

The board should be tested fully before final assembly.

Refurbished Original Board

A refurbished original board may retain an original Samsung PCB with a replaced USB-C connector or repaired board-level components.

Potential benefits may include:

• Original board shape
• Original connector placement
• Original antenna layout
• Original microphone characteristics

However, prior operating history and refurbishment workmanship may vary.

Pulled Original Board

A pulled original board is removed from another compatible phone.

It may retain original components but has previous operating history.

Possible signs include:

• Minor cosmetic marks
• Residual adhesive
• Used screw points
• Original production labels
• Previous contact wear

Pulled does not mean brand new.

Software Pairing

The charging-port daughter board is not normally a serialized biometric component.

Replacement generally does not require:

• Samsung account pairing
• Fingerprint calibration
• IMEI programming
• Device activation
• Knox enrollment

However, regional and hardware compatibility remains essential.

The replacement board cannot change:

• IMEI
• Carrier lock
• Storage capacity
• Samsung account
• Network blacklist status
• Regional firmware
• Processor type

Installation Difficulty

Replacing the daughter board is an advanced internal repair.

The procedure may require:

• Heating the rear glass
• Removing the back cover
• Removing old rear-cover adhesive
• Disconnecting the battery
• Removing the wireless-charging and NFC assembly
• Removing the loudspeaker
• Disconnecting the main interconnect cable
• Disconnecting coaxial antenna cables
• Removing screws and brackets
• Releasing the original daughter board
• Transferring required seals or components
• Installing new rear-cover adhesive
• Testing and reassembling the phone

Improper installation may damage:

• Rear glass
• Battery
• Main logic board
• Interconnect flex cable
• Coaxial cables
• Antenna sockets
• Loudspeaker
• Wireless-charging coil
• NFC assembly
• Cameras
• Display
• Replacement daughter board

Professional installation is strongly recommended.

Installation Preparation

Before installation:

1. Confirm the exact Galaxy S23 FE model number.
2. Select North American or international compatibility correctly.
3. Compare the replacement board with the original.
4. Compare all printed board numbers.
5. Inspect all connectors and antenna contacts.
6. Inspect the USB-C connector.
7. Test the phone with known-good charging equipment.
8. Back up important data.
9. Power off the phone.
10. Remove the SIM tray.
11. Work on a clean, static-safe surface.
12. Prepare suitable rear-cover adhesive.
13. Review the correct repair procedure.

Do not install a visibly damaged or incompatible board.

Installation Notes

During installation:

1. Apply controlled heat to soften the rear-cover adhesive.
2. Avoid inserting opening tools too deeply.
3. Protect the battery from puncture.
4. Disconnect the battery before disconnecting or connecting the daughter board.
5. Keep all screws organized by exact position.
6. Release coaxial connectors vertically.
7. Do not pull coaxial cables by their wires.
8. Inspect the main interconnect flex for tears or creases.
9. Transfer required microphone gaskets or brackets.
10. Seat the replacement board flat in the frame.
11. Confirm that no cable is trapped beneath it.
12. Align the USB-C connector with the frame opening.
13. Reconnect all cables without forcing them.
14. Confirm all coaxial connectors are fully seated.
15. Test the phone before resealing the rear cover.

Incorrect screw placement or excessive force may damage the board or phone.

Connector Handling

Board-to-board and coaxial connectors are delicate.

Do not:

• Force a misaligned connector
• Press on surrounding components
• Pry with sharp metal tools
• Pull coaxial cables sideways
• Repeatedly connect and disconnect without need
• Apply power while connectors are partially seated

Connector damage may cause:

• No charging
• No data connection
• Microphone failure
• Signal loss
• Intermittent operation
• Main-board damage

Installation-related connector damage is not covered by the parts warranty.

Battery Safety

The repair requires work near the lithium-ion battery.

Do not:

• Puncture the battery
• Bend the battery
• Crush the battery
• Overheat the battery
• Short battery contacts
• Use sharp tools near the cell
• Reassemble a swollen or damaged battery

Stop work if the battery:

• Swells
• Smokes
• Hisses
• Leaks
• Produces a chemical smell
• Becomes excessively hot
• Has damaged outer wrapping

A damaged lithium-ion battery can ignite or release hazardous material.

Testing Before Final Assembly

Before resealing the phone, test:

• USB-C cable insertion
• Standard wired charging
• Fast charging
• Samsung Super Fast Charging
• Charging stability
• USB data transfer
• Computer recognition
• Android Auto where available
• USB accessory recognition
• Primary microphone
• Voice recording
• Cellular signal
• Mobile data
• Wi-Fi
• Bluetooth
• Loudspeaker
• Earpiece
• Cameras
• Wireless charging
• NFC
• SIM detection
• Display
• Touchscreen
• Fingerprint reader
• Device temperature

Test with:

• More than one known-good USB-C cable
• Compatible USB PD PPS power adapter
• Data-capable cable
• Computer
• Samsung diagnostic software where available

Do not reseal the back cover until all relevant functions have been confirmed.

Charging Test Procedure

A practical charging test may include:

1. Inspect the replacement USB-C connector.
2. Insert a known-good cable.
3. Confirm that charging begins.
4. Check the displayed charging status.
5. Test with a compatible USB PD PPS adapter.
6. Confirm charging remains stable with gentle cable movement.
7. Monitor phone and port temperature.
8. Test at a lower battery percentage where faster charging is more likely.
9. Confirm the phone does not repeatedly connect and disconnect.
10. Repeat with another charger and cable.

A USB power meter can provide additional diagnostic data but does not prove that every board function is working correctly.

Wireless Charging Notice

The Galaxy S23 FE supports wireless charging independently of the USB-C daughter board.

A phone may continue charging wirelessly even when the USB-C port is damaged.

The daughter board does not include:

• Wireless-charging coil
• NFC antenna
• Rear charging assembly

If both wired and wireless charging fail, inspect:

• Battery
• Main-board charging system
• Power-management circuitry
• Software
• Temperature
• Liquid damage
• Other internal faults

Rear-Cover Adhesive

Opening the phone normally damages the original rear-cover adhesive.

New rear-cover adhesive is not included unless expressly stated.

The installer should obtain suitable model-specific adhesive.

Improper sealing may cause:

• Rear-cover lifting
• Cosmetic gaps
• Dust entry
• Moisture entry
• Loose fitment
• Reduced structural security

Adhesive does not guarantee restoration of the original factory ingress-resistance rating.

Water-Resistance Notice

Opening the Galaxy S23 FE compromises the original factory seal.

Even when new rear-cover adhesive is installed, the original IP rating cannot be restored or guaranteed by a typical repair.

Avoid exposing the repaired phone to:

• Water
• Rain
• Steam
• High humidity
• Condensation
• Showers
• Swimming pools
• Liquid spills

Liquid damage is not covered by the component warranty.

No Tools or Adhesive Included

No repair tools or adhesive are included.

The installer may require:

• Rear-cover adhesive
• Heating equipment
• Opening picks
• Suction tool
• Precision screwdrivers
• Plastic disconnect tools
• Fine tweezers
• Static-protection equipment
• Cleaning materials
• Controlled clamping tools

The purchaser and installer are responsible for obtaining all required tools and consumables.

Product Condition and Packaging

Product appearance and packaging may vary according to:

• Selected regional version
• Supplier
• Production batch
• Board revision
• Manufacturing source
• Product condition
• Packaging revision

Possible differences include:

• PCB colour
• Printed numbers
• Connector colour
• Microphone appearance
• Shielding
• Surface-mounted components
• Protective packaging

Do not rely solely on a generic product photograph.

Compatibility should be verified through:

• Complete phone model
• Regional version
• Board number
• Physical layout
• Connector arrangement

Important Notes

• Replacement USB-C charging-port daughter board
• Designed for Samsung Galaxy S23 FE 5G
• Separate North American and international versions
• US versions include supported SM-S711U and SM-S711U1 models
• Canadian version includes supported SM-S711W models
• International version includes supported SM-S711B and SM-S711B/DS models
• North American and international boards are not interchangeable
• SM-S7110 and SM-S711N compatibility is not assumed
• USB-C port is pre-soldered to the board
• May restore wired charging
• May restore USB data transfer
• May restore wired Android Auto
• May include the primary microphone
• May include antenna and interconnect contacts
• Supports compatible charging up to 25W
• Requires compatible USB PD PPS equipment for Super Fast Charging
• Does not repair main-board charging faults
• Does not include wireless-charging coil
• Advanced internal installation required
• Professional installation strongly recommended
• Regional compatibility must be confirmed
• Rear-cover adhesive is not included
• No tools or adhesive included
• Original water resistance cannot be guaranteed after repair
• Test charging, data, microphone, signal, and wireless functions before sealing
• 30-day limited parts-only warranty
• Product appearance and markings may vary

30-Day Limited Parts-Only Warranty

This replacement daughter board includes a 30-day limited parts-only warranty against confirmed manufacturing defects, subject to the applicable 3C-Easy Markham Component Warranty.

Potential covered defects may include:

• Non-functional USB-C connector before installation
• Board-level charging failure confirmed during initial testing
• Defective integrated microphone where included
• Defective USB data connection confirmed with compatible equipment
• Another verified manufacturing defect

The warranty does not cover:

• Installation labour
• Removal labour
• Diagnostic charges
• Shipping costs
• Damage to the phone
• Data loss
• Incorrect model selection
• Incorrect regional-version selection
• North American board installed in an international phone
• International board installed in a North American phone
• Unsupported SM-S7110 or SM-S711N installation
• Incompatible board revision
• Bent or damaged USB-C connector
• Bent, broken, or missing connector contacts
• Damaged board-to-board connectors
• Damaged coaxial sockets
• Torn interconnect flex cables
• Damaged antenna cables
• Physical or impact damage
• Liquid or corrosion damage
• Heat damage
• Improper installation
• Incorrect screw placement
• Forced connectors
• Battery puncture
• Static-electricity damage
• Damage caused by unsuitable charging equipment
• Main-board charging faults
• Power-management IC faults
• USB-controller faults
• Battery faults
• Software problems
• Android Auto compatibility problems unrelated to the board
• Moisture warnings caused by another component
• Cellular faults caused by regional incompatibility
• Antenna faults unrelated to the supplied board
• Microphone problems caused by missing seals or frame damage
• Reduced water resistance after repair
• Removed, altered, or damaged warranty labels

The board must be inspected and fully tested before final reassembly.

Warranty coverage applies only to the supplied component and does not include labour, installation, removal, device replacement, data recovery, or consequential damage.

Intellectual Property Disclaimer

Samsung, Galaxy, Galaxy S, Galaxy S23 FE, Samsung Super Fast Charging, Android, Android Auto, USB Type-C, USB Power Delivery, PPS, Snapdragon, Exynos, and related names, logos, and trademarks belong to their respective owners.

3C-Easy Markham is not affiliated with, authorized by, sponsored by, or endorsed by Samsung Electronics, Google, Qualcomm, the USB Implementers Forum, or any applicable mobile carrier.

All brand names and model references are used solely to identify product compatibility and intended use.