Replacement Earpiece Speaker for Apple iPhone 7, 7 Plus, 8, 8 Plus, SE 2020, and SE 2022
Restore call audio from the upper receiver area of a compatible Apple iPhone with this replacement earpiece speaker.
This internal component is designed to replace an earpiece speaker affected by low volume, distorted sound, crackling, intermittent audio, or complete loss of sound during regular phone calls.
Each supported iPhone model uses a model-specific earpiece speaker. Select the exact phone model before ordering, as these components should not be assumed to be interchangeable.
Compatible Models
Apple iPhone 7
Apple iPhone 7 Plus
Apple iPhone 8
Apple iPhone 8 Plus
Apple iPhone SE 2020 — 2nd Generation
Apple iPhone SE 2022 — 3rd Generation
- A2595
- A2782
- A2783
- A2784
- A2785
Please confirm the exact model number under Settings > General > About before ordering.
Available Options
- Replacement earpiece speaker for iPhone 7
- Replacement earpiece speaker for iPhone 7 Plus
- Replacement earpiece speaker for iPhone 8
- Replacement earpiece speaker for iPhone 8 Plus
- Replacement earpiece speaker for iPhone SE 2020
- Replacement earpiece speaker for iPhone SE 2022
Select the exact option for the device being repaired.
Key Features
- Model-specific upper earpiece speaker
- Designed to restore call audio from the receiver area
- May resolve weak, muffled, distorted, crackling, or missing earpiece sound
- Suitable for replacing a damaged, contaminated, corroded, or non-responsive speaker
- Designed for internal installation
- Cost-effective alternative to replacing the complete device
- Professional installation strongly recommended
- Inspected or tested before shipment when applicable
Common Earpiece-Speaker Failure Symptoms
Replacement may be appropriate when the device:
- Produces no sound from the earpiece during calls
- Has very low call volume despite the volume being increased
- Produces muffled or unclear speech
- Crackles, buzzes, or distorts during calls
- Produces intermittent earpiece audio
- Sounds normal on speakerphone but not through the upper receiver
- Stops producing receiver audio after impact or liquid exposure
- Has corrosion, debris, or physical damage around the speaker
- Produces abnormal vibration or rattling from the top speaker area
These symptoms may also be caused by blocked speaker mesh, damaged front-sensor flex cables, display damage, logic-board faults, audio-circuit problems, software settings, liquid ingress, or another defective component.
Proper diagnosis is recommended before replacing the earpiece speaker.
Product Quality Notes
This replacement earpiece speaker may be aftermarket, refurbished original, pulled original, or otherwise sourced depending on the selected product option and available inventory.
Volume, tonal balance, clarity, bass response, physical appearance, markings, and acoustic performance may vary depending on the component grade and production batch.
The replacement speaker does not normally include:
- Front camera
- Proximity sensor
- Ambient-light sensor
- Front-sensor flex cable
- Speaker mesh
- Bracket
- Screws
- Display assembly
Compare the replacement component carefully with the original speaker before installation.
An earpiece-speaker replacement will not resolve audio problems caused by the logic board, audio codec, damaged flex cables, clogged mesh, software, or unrelated components.
Front-Sensor and FaceTime Audio Notice
The earpiece speaker is installed near the front camera and sensor assembly.
Depending on the model, surrounding components may include:
- Front camera
- Proximity sensor
- Ambient-light sensor
- Front microphone
- Front-sensor flex cable
- Earpiece-speaker bracket
These components are delicate and may be damaged during removal or installation.
Damage to the front microphone or sensor flex may cause:
- Proximity-sensor failure
- Screen remaining active during calls
- Front-camera problems
- Poor audio during video calls
- Voice-recording problems
- Automatic-brightness issues
- Other sensor-related faults
Replacing the earpiece speaker alone will not repair a defective front-sensor or camera flex assembly.
Touch ID and Home-Button Notice
The iPhone 7, 7 Plus, 8, 8 Plus, SE 2020, and SE 2022 use a paired Touch ID home button.
The original home-button assembly must be protected during display removal and repair.
Damage to the original home button, home-button flex cable, display connector, or related circuitry may permanently disable Touch ID or home-button functionality.
The replacement earpiece speaker does not include a home button or Touch ID components.
Installation Notes
Professional installation is strongly recommended.
Earpiece-speaker replacement requires opening the device, disconnecting the display, and removing components attached to the upper portion of the screen assembly.
Improper handling may damage the display, battery, front camera, sensor flex cable, home button, Touch ID-related components, logic board, or connector sockets.
Before final installation:
- Confirm the exact iPhone model
- Compare the replacement speaker with the original component
- Inspect the speaker contacts and surrounding components
- Disconnect the battery before disconnecting or reconnecting display components
- Protect the original home button and Touch ID-related components
- Carefully remove the earpiece-speaker bracket
- Avoid tearing or folding the front-sensor flex cable
- Inspect the speaker mesh for dirt, adhesive, or blockage
- Clean the speaker opening carefully where appropriate
- Position the replacement speaker correctly
- Ensure all contacts align properly
- Reinstall the original bracket and screws in their correct positions
- Test call audio before resealing the device
- Test at several volume levels
- Test the proximity sensor during a call
- Test the front camera and video calling
- Test speakerphone and microphone performance
- Test the home button and Touch ID before final assembly
- Confirm that no abnormal buzzing or rattling is present
Do not mix screws or install screws in the wrong locations. Incorrect screw placement may damage internal components or the logic board.
Do not apply excessive pressure to the display or sensor assembly.
No tools, adhesive, display seal, bracket, screws, or installation materials are included.
Water-Resistance Notice
Opening the device compromises the original factory seal.
A replacement display adhesive seal may help reduce exposure to dust and incidental moisture, but original water resistance cannot be restored or guaranteed after repair.
Avoid exposing a repaired device to water, steam, high humidity, or other liquids.
Warranty
This component includes a 30-day limited parts-only warranty against manufacturing defects, subject to the applicable 3C-Easy Markham Component Warranty.
The warranty does not cover:
- Blocked or contaminated speaker mesh
- Dust, debris, fingerprints, or adhesive affecting sound quality
- Torn, folded, punctured, stretched, or damaged flex cables
- Damaged speaker contacts or connector points
- Damage to the front camera or sensor assembly
- Damage to the home button or Touch ID-related components
- Incorrect screw placement
- Improper installation or incorrect part selection
- Physical, impact, or pressure damage
- Liquid, moisture, or corrosion damage
- Damage caused by excessive heat
- Audio problems caused by the logic board or audio circuitry
- Software, volume-setting, or accessibility-setting issues
- Distortion caused by unrelated components
- Labour, diagnostics, installation, removal, or related repair costs
The component must be connected and fully tested before final installation.
Important Notes
- Earpiece speaker only unless otherwise stated.
- Front camera, sensor flex cable, bracket, screws, and speaker mesh are not included.
- Phone, tools, adhesive, display seal, and installation materials are not included.
- Select the exact option for the iPhone 7, 7 Plus, 8, 8 Plus, SE 2020, or SE 2022.
- Earpiece speakers should not be assumed to be interchangeable between models.
- Protect the original home button and Touch ID components during installation.
- Inspect and clean the earpiece mesh before replacing the speaker.
- Test call audio, proximity sensing, front camera, microphone, home button, and Touch ID before final installation.
- Water and dust resistance cannot be guaranteed after the device has been opened or repaired.
- Professional installation is strongly recommended.
- Product appearance, markings, component grade, acoustic performance, and packaging may vary between production batches.
Apple, iPhone, Touch ID, FaceTime, and related trademarks belong to Apple Inc. and are used only to identify product compatibility. 3C-Easy Markham is not affiliated with or endorsed by Apple Inc.
files/2024-01-17163749.png
files/2024-01-17163844.png
