Replacement Housing for Apple iPhone 11, 11 Pro, and 11 Pro Max

Replacement Housing for Apple iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max with Miscellaneous Parts Preinstalled

Restore the exterior structure, rear-glass appearance, button alignment, and internal mounting points of a compatible Apple iPhone with this replacement housing assembly featuring miscellaneous small parts preinstalled.

This listing includes model-specific replacement housing options for:

• Apple iPhone 11
• Apple iPhone 11 Pro
• Apple iPhone 11 Pro Max

A replacement housing may be suitable for devices with damaged rear glass, a bent or dented frame, worn exterior surfaces, damaged camera surrounds, stripped mounting points, or other structural and cosmetic damage.

These assemblies may include selected small components already installed to reduce the amount of component transfer required during repair. However, the exact preinstalled parts may vary by model, colour, supplier, production batch, and available inventory.

This product does not normally include the logic board, display, battery, cameras, Face ID components, charging-port assembly, speakers, Taptic Engine, wireless-charging coil, or other major internal components unless specifically stated.

Compatible Models

Apple iPhone 11

• A2111
• A2221
• A2223

Apple iPhone 11 Pro

• A2160
• A2215
• A2217

Apple iPhone 11 Pro Max

• A2161
• A2218
• A2220

Please confirm the exact iPhone model before ordering.

The model number can normally be checked under:

Settings > General > About > Model Number

Tap the displayed part number where necessary to reveal the A-number.

The model number may also appear on:

• Original packaging
• Purchase documentation
• Carrier account records
• Device-management software
• Diagnostic tools
• Internal component labels

Do not select a replacement housing based only on exterior appearance. The iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max use different dimensions, camera layouts, internal mounting points, antenna arrangements, and component configurations.

Available Models

iPhone 11 Replacement Housing

Designed for compatible iPhone 11 models with a 6.1-inch display format and dual rear-camera system.

iPhone 11 Pro Replacement Housing

Designed for compatible iPhone 11 Pro models with a 5.8-inch display format and triple rear-camera system.

iPhone 11 Pro Max Replacement Housing

Designed for compatible iPhone 11 Pro Max models with a 6.5-inch display format and triple rear-camera system.

Each housing option is model-specific and cannot be interchanged with another iPhone 11-series model.

Available Colours

Depending on the selected iPhone model, possible housing colours may include:

iPhone 11

• Black
• White
• Green
• Yellow
• Purple
• Red
• Other compatible replacement finishes where available

iPhone 11 Pro and iPhone 11 Pro Max

• Space Gray
• Silver
• Gold
• Midnight Green
• Other compatible replacement finishes where available

Colour availability varies by model and inventory.

Replacement colour may differ slightly from the original Apple finish in:

• Shade
• Saturation
• Surface texture
• Gloss level
• Matte appearance
• Frame finish
• Button colour
• Camera-ring colour
• Logo appearance
• Antenna-line colour

Product photographs are representative. Lighting, screen settings, manufacturing tolerances, and production batches may affect perceived colour.

Key Features

• Replacement rear housing assembly for selected iPhone 11-series models
• Available for iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max
• Includes rear housing, metal frame, and rear-glass structure
• Designed to replace cracked rear glass and damaged exterior framing
• May include miscellaneous small parts preinstalled
• Model-specific internal mounting points
• Model-specific rear-camera openings
• Preinstalled side buttons may be included
• Preinstalled camera rings or lens bezels may be included
• May reduce the number of small components requiring transfer
• Suitable for professional repair and experienced installation
• Multiple model-specific colours may be available
• Professional installation strongly recommended

Common Reasons for Housing Replacement

Housing replacement may be appropriate when the phone has:

• Cracked or shattered rear glass
• Missing sections of rear glass
• A bent middle frame
• Dented corners
• Deep exterior scratches
• Worn or damaged frame coating
• Damaged camera surrounds
• Loose or missing camera rings
• Damaged button openings
• Stripped internal mounting points
• Deformed display seating surfaces
• Poor screen fitment caused by frame damage
• Rear-glass separation
• Damage caused by impact or crushing
• Cosmetic damage that cannot be corrected through glass-only replacement

Housing replacement may not resolve:

• Logic-board damage
• Cellular or Wi-Fi faults
• Camera failure
• Face ID failure
• Battery problems
• Charging faults
• Display problems
• Liquid damage
• Software problems
• Sensor failures
• Other unrelated internal faults

Proper inspection and diagnosis are recommended before beginning the repair.

Miscellaneous Preinstalled Parts

The replacement housing may include a selection of small components already installed.

Depending on the exact model, supplier, and production batch, preinstalled parts may include:

• Rear glass
• Camera lens covers
• Camera rings or bezels
• Side-button caps
• Volume-button caps
• Ring/Silent switch hardware
• SIM-tray opening hardware
• Internal brackets
• Small metal clips
• Meshes
• Protective films
• Screw posts
• Selected flex-cable retaining pieces
• Adhesive elements
• Thermal or insulating materials
• Decorative exterior parts

The exact included components vary and are not guaranteed unless specifically identified in the selected product option.

The phrase “miscellaneous parts preinstalled” does not mean that the housing is a complete phone chassis with all internal components installed.

Compare the replacement housing carefully with the original device before beginning disassembly.

Components Normally Not Included

Unless specifically stated, the following components are not included:

• Logic board
• Display assembly
• Battery
• Rear-camera modules
• Front-facing camera
• TrueDepth camera system
• Face ID components
• Earpiece speaker and sensor assembly
• Charging-port flex cable
• Lightning connector
• Loudspeaker
• Taptic Engine
• Wireless-charging coil
• NFC components
• Power-button flex cable
• Volume-button flex cable
• Ring/Silent switch flex cable
• Cellular antennas
• Wi-Fi and Bluetooth antennas
• SIM tray
• SIM reader
• Microphones
• Screws
• Display adhesive
• Battery adhesive
• Tools
• Installation service

Some small components from this list may occasionally be included depending on the exact housing configuration. Do not assume inclusion unless specifically stated.

Housing Quality Notes

Replacement housings may be manufactured using a combination of new replacement materials and compatible preinstalled components.

Depending on the selected option, the housing may differ from the original Apple assembly in:

• Rear-glass material
• Frame alloy or finish
• Surface texture
• Colour shade
• Logo appearance
• Internal markings
• Camera-ring finish
• Button feel
• Antenna-line appearance
• Internal bracket design
• Screw-post tolerances
• Adhesive quality
• Water-resistance sealing
• Wireless-charging alignment
• Overall cosmetic consistency

Minor differences that do not materially prevent installation or normal use may be consistent with the replacement nature of the product.

Unless specifically described as an original pulled or refurbished Apple housing, this component should be considered a compatible replacement housing rather than a genuine new Apple service part.

Rear-Glass and Logo Notice

The rear glass may include a centred logo or other exterior markings depending on the selected version and applicable inventory.

Logo appearance may vary in:

• Size
• Position
• Reflectivity
• Colour
• Finish
• Etching depth
• Printed detail

Product markings are provided only to match the appearance and compatibility of the intended device.

Availability of particular markings may vary by region, supplier, or production batch.

Camera Lens and Camera-Ring Notice

Replacement housings may include camera lens covers and camera rings preinstalled.

Before transferring the rear-camera modules:

• Inspect every lens cover for scratches, cracks, haze, or contamination.
• Confirm the camera openings match the selected iPhone model.
• Remove protective films where applicable.
• Clean the inner lens surfaces carefully.
• Keep dust and fingerprints away from the camera area.
• Confirm the camera rings are securely installed.
• Check that no adhesive protrudes into the camera openings.
• Test all rear cameras before final assembly.

Poor camera image quality after housing replacement may be caused by:

• Dust inside the lens cover
• Fingerprints or adhesive residue
• Scratched replacement lens glass
• Misaligned camera modules
• Internal pressure against a camera
• Damaged original camera hardware
• Logic-board faults
• Incompatible camera openings

Housing replacement does not repair damaged camera modules.

Face ID and TrueDepth Notice

The Face ID and TrueDepth camera components are not included and must be transferred from the original device where required.

Face ID components are security-paired to the original logic board. Damage to these components may permanently disable Face ID.

Take particular care with:

• Front-facing camera assembly
• Dot projector
• Flood illuminator
• Infrared camera
• Earpiece speaker and sensor flex
• Proximity sensor
• Ambient-light sensor
• Related brackets and flex cables

Do not replace, mix, or damage paired Face ID components.

Housing replacement does not restore Face ID when the original paired hardware or logic-board circuitry is damaged.

Side-Button and Flex-Cable Notice

Exterior button caps may be preinstalled, but internal button flex cables are not necessarily included.

Depending on the housing configuration, the original phone may require transfer of:

• Power-button flex cable
• Volume-button flex cable
• Ring/Silent switch flex cable
• Flash and rear-microphone flex cable
• Associated brackets
• Metal clips
• Button-contact pieces
• Waterproof membranes
• Screws

After assembly, test:

• Power button
• Volume Up button
• Volume Down button
• Ring/Silent switch
• Camera flash
• Rear microphone
• Screenshot button combinations
• Emergency SOS button combinations

A button problem does not automatically confirm that the housing is defective. Incorrect flex routing, missing brackets, damaged original flex cables, and improper screw placement may cause similar symptoms.

Wireless-Charging and NFC Notice

The wireless-charging coil and NFC assembly are not normally included and must be transferred from the original phone unless specifically stated.

After transfer, test:

• Wireless charging
• MagSafe-style magnetic alignment where applicable to third-party accessories
• Apple Pay
• NFC reading
• Charging stability
• Device temperature during charging

Wireless-charging or NFC problems may be caused by:

• Damaged original charging coil
• Incorrect coil alignment
• Torn flex cables
• Missing grounding contacts
• Improper screw placement
• Logic-board faults
• Excessive adhesive
• Incompatible accessories
• Metal debris inside the housing

The iPhone 11 series does not include Apple’s later integrated MagSafe magnet array, although it supports Qi wireless charging.

Antenna and Cellular Notice

A housing replacement requires careful transfer and positioning of cellular, Wi-Fi, Bluetooth, and GPS antenna components.

Regional iPhone variants may use different antenna configurations.

After installation, test:

• Cellular signal
• Voice calls
• Mobile data
• Wi-Fi
• Bluetooth
• GPS and navigation
• SIM detection
• Emergency-call functionality where available

Poor reception may be caused by:

• Missing antenna contacts
• Incorrect bracket placement
• Loose screws
• Damaged coaxial cables
• Incorrect grounding
• Incompatible regional housing
• Bent contact springs
• Logic-board or baseband faults

A replacement housing should not be assumed to correct pre-existing signal or baseband problems.

Frame and Display Fitment Notice

The replacement housing forms the mounting surface for the display assembly.

Before installing the display:

• Inspect the frame for bends or dents.
• Confirm all corners are correctly formed.
• Check the display seating surface.
• Remove protective films and debris.
• Verify screw posts and brackets are secure.
• Confirm no internal component protrudes above its intended position.
• Dry fit the display before applying adhesive.
• Check for even gaps around the perimeter.

Improper fitment may cause:

• Raised display edges
• Uneven screen gaps
• Internal LCD or OLED pressure
• Touch problems
• Display lines
• Backlight pressure marks on iPhone 11
• OLED damage on iPhone 11 Pro or 11 Pro Max
• Cracked glass
• Premature screen separation
• Reduced sealing performance

Do not force the display into a housing that does not fit correctly.

Battery Transfer Notice

The original battery may require removal and transfer to the replacement housing.

Lithium-ion batteries can be hazardous if punctured, bent, crushed, overheated, or improperly handled.

Do not reuse a battery showing:

• Swelling
• Deformation
• Puncture damage
• Leakage
• Torn wrapping
• Unusual odour
• Excessive heat
• Damaged flex cables
• Corrosion
• Pressure against the display or rear housing

A damaged battery may cause:

• Screen lifting
• Rear-glass pressure
• Display damage
• Short circuits
• Overheating
• Fire
• Chemical exposure
• Logic-board damage

Use suitable battery adhesive during reinstallation. Battery adhesive is not included unless specifically stated.

Logic-Board Transfer Notice

The original logic board must normally be transferred into the replacement housing.

Logic-board removal and installation require careful handling of:

• Board connectors
• Shielding
• Grounding contacts
• Coaxial antenna cables
• Camera connectors
• Display connectors
• Battery connector
• Charging-port connector
• Face ID-related connectors
• Thermal pads
• Brackets and screws

Avoid touching exposed contacts unnecessarily.

Do not bend the logic board or force connectors into position.

Incorrect screw placement may damage the logic board or create a long-screw-related fault.

Regional Compatibility Notice

iPhone 11-series devices sold in different regions may differ in:

• Cellular antenna layout
• SIM configuration
• Dual-physical-SIM support
• eSIM configuration
• Internal antenna brackets
• Frame openings
• Regulatory markings
• Logic-board shape or related hardware
• SIM-tray design

Before installation, compare:

• Complete A-number
• SIM-tray opening
• Antenna windows and lines
• Internal mounting posts
• Logic-board mounting points
• Coaxial cable routing
• Speaker and microphone openings
• Button positions
• Camera openings
• Charging-port opening

Installing an incompatible regional housing may cause:

• Poor cellular reception
• SIM-tray incompatibility
• Missing mounting points
• Antenna contact problems
• Incorrect internal fitment
• Button misalignment
• Other functional faults

Model Compatibility Notice

Each replacement housing is designed for one specific iPhone model.

The following housings are not interchangeable:

• iPhone 11
• iPhone 11 Pro
• iPhone 11 Pro Max

Differences include:

• Overall dimensions
• Display size
• Rear-camera configuration
• Battery dimensions
• Logic-board layout
• Internal mounting points
• Speaker dimensions
• Antenna layout
• Button positioning
• Frame geometry
• Rear-glass design

This listing is not intended for:

• iPhone XR
• iPhone XS
• iPhone XS Max
• iPhone 12-series models
• Other iPhone generations

Confirm the exact device model before ordering.

Installation Notes

Professional installation is strongly recommended.

A complete housing replacement is an advanced repair requiring extensive disassembly and transfer of nearly every major internal component.

Improper installation may damage:

• Logic board
• Display
• Battery
• Face ID components
• Cameras
• Charging-port flex cable
• Button flex cables
• Wireless-charging coil
• NFC components
• Antennas
• Speakers
• Taptic Engine
• Microphones
• Internal connectors
• Replacement housing

Before final installation:

• Confirm the exact iPhone model and A-number.
• Confirm the selected housing colour.
• Compare the replacement housing with the original device.
• Identify which miscellaneous parts are preinstalled.
• Identify which original components require transfer.
• Inspect the housing for shipping damage, dents, or deformation.
• Inspect all camera lens covers and rings.
• Confirm internal mounting points and screw posts.
• Power off the phone.
• Disconnect the battery before disconnecting other components.
• Organize screws by exact location and length.
• Photograph the original component layout where helpful.
• Transfer all required brackets, shields, meshes, contacts, and cushions.
• Transfer the original paired Face ID components carefully.
• Do not mix screws of different lengths.
• Do not force connectors into place.
• Avoid sharply bending or puncturing flex cables.
• Inspect the battery before reuse.
• Apply suitable battery adhesive.
• Confirm correct antenna and grounding-contact placement.
• Confirm correct wireless-charging coil alignment.
• Check that no component protrudes above the internal frame.
• Dry fit the display before applying perimeter adhesive.
• Test all functions before sealing the phone.

After component transfer, test:

• Display image
• Touchscreen response
• Face ID
• Front-facing camera
• All rear cameras
• Camera flash
• Proximity sensor
• Ambient-light sensor
• Earpiece speaker
• Loudspeaker
• All microphones
• Power button
• Volume buttons
• Ring/Silent switch
• Taptic Engine
• Wired charging
• USB data connectivity
• Wireless charging
• Apple Pay and NFC
• Cellular signal
• Mobile data
• Wi-Fi
• Bluetooth
• GPS
• SIM detection
• Battery charging
• Battery temperature
• Screen fitment
• Camera-lens clarity
• Rear-glass and frame alignment

Do not permanently seal the display until all functions have been tested.

Water-Resistance Notice

Opening and rebuilding an iPhone compromises its original factory adhesive and water-resistant sealing.

Replacement adhesive may help reduce exposure to dust and incidental moisture, but the original IP rating and factory water resistance cannot be restored or guaranteed after housing replacement.

A repaired device should not be relied upon for:

• Swimming
• Showering
• Underwater photography
• Submersion
• Exposure to steam
• Heavy rain
• High-humidity environments
• Other intentional liquid exposure

Sealing performance may be affected by:

• Replacement-housing tolerances
• Frame condition
• Display condition
• Adhesive quality
• Improper surface preparation
• Uneven pressure
• Component misalignment
• Missing seals or meshes
• Previous repairs
• Production tolerances

Avoid exposing the rebuilt device to water, steam, high humidity, or other liquids.

Package Contents

Depending on the selected option:

• 1 × Replacement rear housing and frame assembly for the selected iPhone model
• 1 × Preinstalled rear-glass panel
• Miscellaneous small parts where included by the supplier

The exact included small parts may vary.

The following are not included unless specifically stated:

• Logic board
• Display
• Battery
• Front or rear cameras
• Face ID components
• Charging-port assembly
• Loudspeaker
• Earpiece speaker
• Taptic Engine
• Wireless-charging coil
• NFC assembly
• Antenna flex cables
• Internal button flex cables
• SIM tray
• Screws
• Display adhesive
• Battery adhesive
• Tools
• Installation materials
• Installation service

Warranty

This component includes a 30-day limited parts-only warranty against confirmed manufacturing defects, subject to the applicable 3C-Easy Markham Component Warranty.

The warranty does not cover:

• Cracked, chipped, scratched, or shattered rear glass
• Dents, bends, or frame deformation after delivery
• Cosmetic damage caused during installation
• Colour variation consistent with replacement manufacturing
• Normal wear, scratches, or coating loss
• Camera-lens damage after installation
• Dust, fingerprints, or adhesive contamination inside camera lenses
• Damaged or stripped screw posts caused by installation
• Damage caused by incorrect screw placement
• Damage caused by transferring components improperly
• Face ID failure
• Camera failure
• Signal or antenna problems
• Wireless-charging or NFC problems
• Button or flex-cable problems
• Damage caused by a swollen or punctured battery
• Damage to the logic board
• Damage to the display
• Damage to flex cables or connectors
• Bent connector pins or damaged sockets
• Incorrect model, region, colour, or revision selection
• Installation in an incompatible device
• Improper installation
• Physical, impact, pressure, bending, or twisting damage
• Liquid, moisture, or corrosion damage
• Damage caused by excessive heat
• Adhesive or sealing failure
• Water-resistance limitations
• Software, calibration, pairing, or compatibility limitations
• Pre-existing device faults
• Labour, diagnostics, installation, removal, shipping, or related repair costs

Inspect the housing and confirm compatibility before transferring components.

Components showing installation marks, adhesive residue, scratches, dents, stripped threads, broken glass, or other physical damage may not qualify for warranty coverage.

Important Notes

• Replacement housing for Apple iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max.
• Select the exact iPhone model before ordering.
• Housings are not interchangeable between the three models.
• Includes miscellaneous small parts preinstalled.
• Exact preinstalled components vary by model, supplier, and production batch.
• Do not assume that every bracket, flex cable, antenna, or internal component is included.
• Major internal components must normally be transferred from the original phone.
• Logic board, display, battery, cameras, Face ID components, and charging assembly are not included unless specifically stated.
• Confirm regional antenna and SIM compatibility before installation.
• Replacement colour and finish may differ slightly from the original Apple housing.
• Camera lens covers and rings should be inspected and cleaned before installation.
• The original paired Face ID components must be transferred carefully.
• Inspect the battery for swelling or physical damage before reuse.
• Test all functions before sealing the display.
• No tools, display adhesive, or battery adhesive are included unless specifically stated.
• Original water resistance cannot be restored or guaranteed after repair.
• Professional installation is strongly recommended.
• Product colour, markings, logo appearance, frame finish, internal layout, included parts, and packaging may vary between production batches.

Apple, iPhone, Face ID, Apple Pay, Lightning, and related trademarks belong to Apple Inc. and are used only to identify product compatibility. 3C-Easy Markham is not affiliated with or endorsed by Apple Inc.