Replacement Housing for Apple iPhone 12 Mini, 12, 12 Pro, and 12 Pro Max

Replacement Housing with Small Components Pre-Installed for Apple iPhone 12 Series

Restore the exterior structure, rear-glass appearance, and internal component mounting points of a compatible Apple iPhone 12-series device with this replacement housing assembly featuring selected small components pre-installed.

This listing includes housing options for:

• Apple iPhone 12 Mini
• Apple iPhone 12
• Apple iPhone 12 Pro
• Apple iPhone 12 Pro Max

A replacement housing may be suitable when the original rear glass, metal frame, camera surround, button openings, internal mounting points, or structural body has been damaged.

Selected small components are pre-installed to reduce the number of parts that must be transferred individually. However, this is not a complete phone assembly. Major functional components must still be transferred from the original device.

Each iPhone 12-series model uses a different housing size, internal layout, camera opening, antenna configuration, and component mounting design. Select the exact device model, colour, and regional version before ordering.

Compatible Models

Apple iPhone 12 Mini

• A2176
• A2398
• A2399
• A2400

Apple iPhone 12

• A2172
• A2402
• A2403
• A2404

Apple iPhone 12 Pro

• A2341
• A2406
• A2407
• A2408

Apple iPhone 12 Pro Max

• A2342
• A2410
• A2411
• A2412

Please confirm the complete model number before ordering.

The model number can normally be checked under:

Settings > General > About > Model Number

Tap the displayed part number where necessary to reveal the A-number.

When the phone cannot be turned on, confirm the model through the original packaging, purchase documentation, SIM-tray information where applicable, or the dimensions and internal layout of the device.

Regional models may differ in cellular antenna arrangements, mmWave hardware, SIM configuration, frame openings, brackets, flex cables, and internal mounting points.

Available Options

• Replacement housing for Apple iPhone 12 Mini
• Replacement housing for Apple iPhone 12
• Replacement housing for Apple iPhone 12 Pro
• Replacement housing for Apple iPhone 12 Pro Max

Colour availability may vary by model and production batch.

Possible finishes may include:

iPhone 12 Mini and iPhone 12

• Black
• White
• Blue
• Green
• Purple
• Red
• Other compatible finishes where available

iPhone 12 Pro and iPhone 12 Pro Max

• Graphite
• Silver
• Gold
• Pacific Blue
• Other compatible finishes where available

Select the exact model and colour before ordering.

Frame shade, rear-glass colour, camera-ring finish, antenna-line colour, button colour, and surface texture may differ slightly from the original device or product photographs.

Small Components Pre-Installed

The housing includes selected small components pre-installed to simplify the transfer process.

Depending on the model, supplier, colour, region, and production batch, pre-installed parts may include some of the following:

• Side-button brackets
• Volume-button brackets
• Mute-switch brackets
• Physical side buttons
• Volume buttons
• Mute-switch hardware
• Camera lens covers
• Camera lens rings
• Camera brackets
• SIM-tray components
• Speaker or microphone meshes
• Internal grounding contacts
• Small metal brackets
• Flex-cable retaining pieces
• Antenna contacts
• Adhesive elements
• Foam pads
• Protective films
• Other minor structural components

The exact included components may vary.

Do not assume that every small part shown in product photographs is included or pre-installed. Compare the replacement housing with the original device before beginning installation.

Major functional components are not included unless specifically stated.

Components Normally Requiring Transfer

Most internal components must be transferred from the original iPhone.

These may include:

• Logic board
• Battery
• Display assembly
• Face ID and front-sensor components
• Front-facing camera
• Rear-camera assemblies
• LiDAR scanner on supported Pro models
• Charging-port assembly
• Loudspeaker
• Earpiece speaker
• Taptic Engine
• Wireless-charging coil
• MagSafe magnet assembly where not included
• NFC-related components
• Side-button flex cable
• Volume and mute-switch flex cable
• Cellular antennas
• Wi-Fi and Bluetooth antennas
• mmWave antenna hardware on applicable regional models
• SIM-card hardware
• Microphones
• Thermal pads
• Shields
• Brackets
• Screws
• Gaskets
• Adhesive
• Other model-specific components

The exact transfer requirements depend on which parts arrive pre-installed in the selected housing.

Key Features

• Replacement rear housing and middle-frame assembly
• Available for Apple iPhone 12 Mini, 12, 12 Pro, and 12 Pro Max
• Selected small components pre-installed
• Designed to replace damaged rear glass and structural frame components
• Model-specific camera openings and internal geometry
• Available in compatible model colours where stocked
• May reduce the number of small brackets and cosmetic pieces requiring transfer
• Suitable for devices with severely cracked rear glass
• Suitable for damaged, dented, or cosmetically worn housings
• Designed to restore internal component mounting positions
• Designed to restore the general exterior appearance of the device
• Extensive internal-component transfer required
• Professional installation strongly recommended

Common Housing-Damage Symptoms

Housing replacement may be appropriate when the iPhone has:

• Cracked or shattered rear glass
• Missing sections of rear glass
• Sharp or exposed glass edges
• A bent or twisted metal frame
• Severe dents around the corners
• Damaged camera lens rings
• Broken camera lens covers
• Misaligned camera openings
• Damaged button openings
• Loose or missing physical buttons
• A damaged SIM-tray opening
• Internal mounting-point damage
• Broken screw posts
• Poor display fitment caused by frame distortion
• Poor back-panel fitment
• Gaps around the display
• Cosmetic damage that cannot be repaired through glass replacement alone
• Damage caused by impact, crushing, pressure, or previous repair attempts
• Corrosion or residue affecting the original housing
• Structural damage preventing other components from seating correctly

Housing replacement will not correct problems caused by:

• Logic-board damage
• Cellular baseband faults
• Face ID failure
• Camera failure
• Battery failure
• Charging-port failure
• Display failure
• Liquid corrosion affecting transferred components
• Damaged antennas
• Software or iOS problems
• Another defective internal component

Proper diagnosis is recommended before transferring parts into the replacement housing.

Housing Quality Notes

This is a replacement housing assembly and may use a combination of aftermarket and refurbished components.

Depending on the selected option and production batch, differences from the original Apple housing may be present in:

• Rear-glass colour
• Frame colour
• Surface texture
• Gloss or matte finish
• Camera-ring finish
• Apple logo appearance or availability
• Regulatory markings
• Engraving
• Antenna-line colour
• Button feel
• Button colour
• Internal machining
• Screw-post alignment
• Bracket design
• Adhesive placement
• Mesh appearance
• Magnet strength or placement
• Weight
• Material thickness
• Overall cosmetic consistency

Minor cosmetic or construction variations that do not materially prevent normal installation may be consistent with the replacement nature of the product.

This housing is not equivalent to a brand-new Apple service housing unless specifically identified as such.

Logo, Marking, and Cosmetic Notice

Product photographs may be representative.

Depending on supplier availability and applicable marketplace requirements, the housing may differ in:

• Logo presence
• Logo positioning
• Regulatory text
• Model markings
• Serial-number markings
• Finish shade
• Camera-ring colour
• Internal printed codes
• Packaging

No replacement housing will retain the original device serial number or other device-specific factory identification markings.

Device identity, activation status, storage capacity, carrier status, and serial information are controlled by the transferred logic board rather than the housing.

Camera Lens and Camera-Ring Notice

The replacement housing may include camera lens covers or decorative camera rings.

Included lens covers are not the camera modules themselves.

Before installation, inspect each lens cover for:

• Cracks
• Scratches
• Dust
• Adhesive residue
• Misalignment
• Uneven seating
• Internal protective films
• Surface contamination

The rear cameras must remain clean during transfer.

Dust, fingerprints, adhesive, or debris inside the lens opening may cause:

• Blurred photographs
• Light flare
• Haze
• Autofocus problems
• Visible spots
• Poor low-light performance
• Camera stabilization noise
• Image distortion

Test all cameras and flash functions before final sealing.

LiDAR Notice for Pro Models

The iPhone 12 Pro and iPhone 12 Pro Max include LiDAR-related hardware that is separate from the replacement housing.

Housing replacement does not repair or replace:

• LiDAR scanner
• Rear-camera modules
• Camera stabilization hardware
• Flash assembly
• Logic-board camera circuitry

The original LiDAR and related camera components must be transferred carefully where applicable.

Improper transfer, contamination, alignment problems, pressure, or connector damage may affect:

• Portrait photography
• Autofocus
• Augmented-reality functions
• Low-light focusing
• Camera calibration
• Other depth-related features

MagSafe and Wireless-Charging Notice

The iPhone 12 series supports MagSafe and wireless charging.

Depending on the selected housing, the MagSafe magnet ring, alignment magnet, wireless-charging coil, NFC components, or related brackets may not be included.

These components may require transfer from the original device.

After installation, test:

• Wired charging
• Wireless charging
• MagSafe charger alignment
• Magnetic accessory attachment
• NFC functionality
• Apple Pay where applicable
• Charging temperature
• Charging stability

MagSafe or wireless-charging performance may be affected by:

• Missing magnets
• Incorrect magnet placement
• Damaged wireless-charging coil
• Damaged NFC components
• Excessive adhesive
• Internal misalignment
• Incompatible housing construction
• Logic-board faults
• Installation damage

Antenna and Regional Compatibility Notice

Different regional iPhone 12-series versions may use different antenna hardware and housing openings.

United States models may include mmWave antenna hardware and a corresponding side-frame window that may not be present on other regional housings.

Before installation, compare:

• Complete A-number
• mmWave antenna opening
• Cellular antenna brackets
• Internal grounding contacts
• SIM-tray position
• Side-button layout
• Screw posts
• Flex-cable routing
• Camera openings
• Speaker and microphone openings
• Wireless-charging clearances
• Logic-board mounting points

Installing the wrong regional housing may cause:

• Missing antenna mounting points
• Poor cellular reception
• Failed 5G or mmWave operation
• Poor Wi-Fi or Bluetooth performance
• Incorrect fitment
• Damaged antenna flex cables
• Button misalignment
• Missing internal contacts
• Difficulty transferring components

Matching only the exterior colour and model name is not sufficient.

Face ID and Front-Sensor Notice

Face ID components are separate from the replacement housing.

Housing replacement does not repair or replace:

• Dot projector
• Flood illuminator
• Infrared camera
• Front-facing camera
• Ambient-light sensor
• Proximity sensor
• Logic-board Face ID circuitry

Many Face ID components are paired to the original logic board.

Improper disassembly, component transfer, connector damage, flex-cable damage, contamination, or pressure may cause permanent loss of Face ID.

After installation, test:

• Face ID
• Front-facing camera
• Proximity sensing during calls
• Automatic brightness
• Tap to Wake
• Raise to Wake
• Earpiece-speaker operation
• Screen wake and sleep

Button and Flex-Cable Notice

Physical button pieces or brackets may be pre-installed, but the electronic button flex cables may still require transfer.

After installation, test:

• Side button
• Volume-up button
• Volume-down button
• Ring/Silent switch
• Screenshot shortcut
• Emergency SOS functions
• Apple Pay side-button activation
• Power-on and shutdown operation

Button problems may result from:

• Incorrect bracket placement
• Misaligned button flex cables
• Missing pads or spacers
• Bent housing sections
• Incorrect screws
• Damaged flex cables
• Excessive adhesive
• Incompatible pre-installed components

Battery and Safety Notice

The original battery may need to be removed and transferred during housing replacement.

Lithium-ion batteries must be handled carefully.

Do not reuse a battery showing:

• Swelling
• Deformation
• Puncture damage
• Leakage
• Torn wrapping
• Exposed internal material
• Unusual odour
• Excessive heat
• Damaged flex cables
• Corroded contacts

Do not puncture, fold, crush, twist, or sharply bend the battery.

A damaged lithium-ion battery may cause:

• Fire
• Smoke
• Toxic vapour
• Chemical leakage
• Burns
• Short circuits
• Excessive heat
• Damage to the phone or surrounding property

Replace a swollen, punctured, bent, or otherwise damaged battery rather than transferring it into the replacement housing.

Display Fitment Notice

Inspect the replacement housing before installing the display.

Confirm that:

• The frame is straight.
• All corners are correctly shaped.
• No screw posts are raised.
• No debris is present.
• Camera brackets sit correctly.
• Button hardware is properly positioned.
• The battery and other internal components sit flat.
• Display clips and mounting areas are unobstructed.
• No transferred component places pressure against the screen.

Incorrect component placement or housing distortion may cause:

• Internal OLED or LCD damage
• Black spots
• Display lines
• Touch failure
• Raised screen edges
• Uneven gaps
• Screen separation
• Flex-cable stress
• Cracked glass

Do not force the display into place.

Internal-Component Transfer Notice

Housing replacement is significantly more involved than a standard screen or battery replacement.

The repair may require near-complete disassembly of the original phone.

During transfer:

• Keep screws organized by exact position and length.
• Photograph component placement before removal.
• Preserve original brackets, shields, foam pads, and grounding contacts.
• Avoid mixing screws of different lengths.
• Disconnect the battery before removing or connecting other components.
• Avoid touching camera lenses and sensor surfaces.
• Keep adhesive away from microphones and speaker openings.
• Confirm that antenna contacts are not bent.
• Ensure all flex cables follow their original routing.
• Do not trap flex cables beneath the logic board or battery.
• Confirm that thermal pads and shields are reinstalled correctly.

Incorrect screw placement may damage the logic board, display, battery, or internal components.

Installation Notes

Professional installation is strongly recommended.

Housing replacement requires extensive disassembly, specialized tools, controlled heat, battery handling, and transfer of delicate paired components.

Improper handling may damage:

• Logic board
• Battery
• Display assembly
• Face ID components
• Front-facing camera
• Rear cameras
• LiDAR hardware
• Charging-port assembly
• Wireless-charging coil
• MagSafe components
• NFC hardware
• Antennas
• Speakers
• Microphones
• Taptic Engine
• Side-button flex cables
• Volume and mute flex cables
• Internal connectors
• Replacement housing

Before final installation:

• Confirm the exact iPhone model and A-number.
• Confirm regional housing compatibility.
• Confirm the selected housing colour.
• Compare the replacement housing with the original device.
• Identify which small components are pre-installed.
• Identify which original components require transfer.
• Inspect the housing for dents, bends, scratches, or machining defects.
• Inspect camera lens covers and rings.
• Confirm all required mounting posts and openings are present.
• Power off the phone.
• Disconnect the battery before removing other internal components.
• Keep screws organized by position and length.
• Transfer the logic board carefully.
• Transfer the charging-port assembly without sharply bending its flex cable.
• Transfer antennas and grounding contacts accurately.
• Transfer the wireless-charging coil and MagSafe components where required.
• Transfer cameras without contaminating the lenses.
• Transfer Face ID and sensor components carefully.
• Inspect the battery before reuse.
• Replace damaged adhesive, seals, gaskets, and foam pads.
• Confirm that all internal components sit flat.
• Check for trapped flex cables.
• Confirm that no screws or debris remain beneath the battery or display.
• Connect and test the phone before final sealing.
• Test display image and touchscreen response.
• Test Face ID.
• Test the front and rear cameras.
• Test LiDAR functions on supported models.
• Test the flash.
• Test proximity and automatic brightness.
• Test the side, volume, and mute controls.
• Test the earpiece and loudspeaker.
• Test all microphones.
• Test vibration and Taptic Engine operation.
• Test wired charging and data transfer.
• Test wireless charging.
• Test MagSafe alignment.
• Test NFC and Apple Pay where applicable.
• Test Wi-Fi, Bluetooth, GPS, cellular reception, and 5G where available.
• Test the SIM card and eSIM where applicable.
• Check for overheating or abnormal battery drain.
• Confirm that the display and back housing sit evenly.
• Do not permanently seal the phone until all functions have been tested.

Water-Resistance Notice

Replacing the housing requires extensive disassembly and compromises the original factory seals.

Replacement adhesive and seals may help reduce exposure to dust and incidental moisture, but the original water-resistance rating cannot be restored or guaranteed after repair.

A repaired iPhone should not be relied upon for:

• Swimming
• Showering
• Underwater photography
• Exposure to steam
• Heavy rain
• High-humidity environments
• Other intentional liquid exposure

Sealing performance may be reduced by:

• Replacement-housing tolerances
• Display condition
• Adhesive quality
• Missing gaskets or seals
• Improper cleaning
• Uneven pressure
• Component misalignment
• Previous repairs
• Corrosion
• Frame distortion

Avoid exposing the repaired device to water, steam, high humidity, or other liquids.

Package Contents

• 1 × Replacement housing for the selected Apple iPhone 12-series model
• Selected small components pre-installed

The following are not included unless specifically stated:

• Logic board
• Battery
• Display
• Face ID components
• Front or rear cameras
• LiDAR scanner
• Charging-port assembly
• Wireless-charging coil
• MagSafe components
• NFC hardware
• Speakers
• Taptic Engine
• Major flex cables
• Tools
• Installation adhesive
• Display seal
• Clamps
• Installation service

Exact included small components may vary by model, colour, supplier, and production batch.

Warranty

This component includes a 30-day limited parts-only warranty against confirmed manufacturing defects, subject to the applicable 3C-Easy Markham Component Warranty.

The warranty does not cover:

• Cracked, chipped, scratched, or shattered rear glass
• Dents, bends, twisting, or frame deformation
• Cosmetic damage occurring after delivery
• Damage caused during component transfer
• Damaged screw posts caused by over-tightening
• Stripped threads
• Damage caused by incorrect screws
• Broken camera lens covers after installation
• Dust or contamination inside camera lenses
• Colour or finish differences consistent with replacement components
• Minor shade variation
• Differences in logos, markings, engraving, or regulatory text
• Button problems caused by transferred flex cables or installation
• Camera, LiDAR, Face ID, charging, antenna, or sensor faults
• Poor reception caused by incorrect regional housing selection or antenna transfer
• Wireless-charging, MagSafe, or NFC problems caused by transferred components
• Damage caused by a swollen or punctured battery
• Torn, folded, punctured, stretched, or damaged flex cables
• Bent connector pins or damaged logic-board sockets
• Incorrect model, region, colour, or revision selection
• Installation in an incompatible device
• Improper installation
• Physical, impact, pressure, or twisting damage
• Liquid, moisture, or corrosion damage
• Damage caused by excessive heat
• Adhesive or sealing failure
• Water-resistance limitations
• Software, iOS, activation, calibration, pairing, or compatibility issues
• Damage to the logic board, display, battery, cameras, or other components during installation
• Labour, diagnostics, programming, installation, removal, shipping, or related repair costs

Inspect the housing carefully before transferring internal components.

Housing assemblies showing installation marks, transferred adhesive, stripped threads, damaged screw posts, bent sections, scratches, or other installation-related damage may not qualify for warranty coverage.

Important Notes

• Replacement housing for Apple iPhone 12 Mini, 12, 12 Pro, and 12 Pro Max.
• Select the exact device model before ordering.
• Select the correct housing colour before ordering.
• Regional and mmWave housing configurations may differ.
• Confirm the complete A-number and internal layout.
• Selected small components are pre-installed.
• Exact included small parts may vary between production batches.
• Major functional components are not included.
• Near-complete disassembly of the original phone is required.
• Most internal components must be transferred from the original device.
• The logic board controls the device serial number, storage capacity, activation status, and carrier identity.
• Replacement housings do not retain the original device-specific serial markings.
• Finish shade, logo, engraving, antenna-line colour, and internal machining may differ from the original housing.
• Verify whether the MagSafe magnets and wireless-charging components are included before installation.
• Inspect camera lens covers before transferring the cameras.
• Keep camera lenses and sensors free from dust and fingerprints.
• Inspect the battery for swelling or physical damage before transfer.
• Do not reuse a damaged lithium-ion battery.
• Test display, Face ID, cameras, LiDAR, buttons, charging, MagSafe, NFC, audio, vibration, sensors, antennas, and connectivity before final sealing.
• No tools or installation adhesive are included unless specifically stated.
• Original water resistance cannot be restored or guaranteed after repair.
• Professional installation is strongly recommended.
• Product appearance, finish, markings, included components, internal layout, and packaging may vary between production batches.

Apple, iPhone, iOS, Face ID, MagSafe, Apple Pay, LiDAR, and related trademarks belong to Apple Inc. and are used only to identify product compatibility. 3C-Easy Markham is not affiliated with or endorsed by Apple Inc.