Refurbished Replacement Screen with Frame for Motorola Moto G Stylus 5G 2024
Restore display, touchscreen, fingerprint, and front-frame functionality on a compatible Motorola Moto G Stylus 5G 2024 with this refurbished replacement screen assembly with frame.
This assembly uses a refurbished original-type pOLED display panel that has undergone restoration, typically including replacement of damaged outer glass and rebonding to a compatible front frame. It includes the display panel, integrated touchscreen digitizer, and front housing frame as one assembled component.
A frame-inclusive assembly reduces the need to separate and bond the display directly onto the original damaged frame. Internal components must still be transferred from the original phone during installation.
Important: This is a refurbished replacement component. It is not a brand-new Motorola Service Pack, aftermarket LCD conversion, complete phone housing, or glass-only part.
Compatible Models
Compatible with the Motorola Moto G Stylus 5G 2024 model family:
- Motorola Moto G Stylus 5G 2024
- XT2419
- XT2419-1
- XT2419-2
- XT2419-3
- XT2419V
- Other XT2419 regional variants where the physical frame and internal layout match
Please verify the complete device model before ordering.
The model number may be found:
-
Under Settings > About phone
- On the original device packaging
- Through the carrier account
- On internal device labels where applicable
- Through Motorola or carrier diagnostic information
This screen is not compatible with:
- Moto G Stylus 5G 2023
- Moto G Stylus 5G 2022
- Moto G Stylus 2024 non-5G
- Moto G 5G 2024
- Moto G Power 5G 2024
- Motorola Edge 2024
- Other Motorola models
Similar names, dimensions, or display sizes do not guarantee compatibility.
Regional Compatibility Notice
The XT2419 model family includes carrier and regional variants.
Known variants may differ in areas such as:
- Antenna-contact layout
- Carrier-specific internal hardware
- SIM configuration
- mmWave antenna provisions
- Grounding contacts
- Internal brackets
- Frame openings
- Side-button components
- Screw-hole positions
- Colour availability
Before installation, compare the replacement frame with the original phone and confirm:
- Complete model number
- Internal mounting points
- Antenna-contact positions
- Side-button openings
- SIM-tray position
- Charging-port opening
- Speaker and microphone openings
- Stylus slot
- Screw locations
- Connector positions
- Frame colour
Do not install the assembly if the physical layout does not match the original phone.
Available Option
Refurbished pOLED Screen with Frame
This listing includes a refurbished replacement display preinstalled into a compatible front frame.
The assembly generally includes:
- Refurbished pOLED display panel
- Newly replaced outer glass where applicable
- Integrated capacitive touchscreen digitizer
- Compatible front housing frame
- Display flex cables
- Factory-style or professional display-to-frame bonding
Components not expressly identified or shown should not be assumed to be included.
Depending on the production batch, the frame may also contain selected:
- Meshes
- Contacts
- Brackets
- Adhesive
- Small structural components
Internal functional components generally require transfer from the original device.
Key Features
- Refurbished replacement display assembly
- Designed for Motorola Moto G Stylus 5G 2024
- Compatible with the XT2419 model family where regional layout matches
- Original-type pOLED display technology
- 6.7-inch display class
- FHD+ 2400 Ă 1080 resolution
- Designed to support up to 120Hz refresh operation
- Integrated capacitive touchscreen digitizer
- Compatible front housing frame
- Centre front-camera opening
- Designed for optical in-display fingerprint operation
- Supports normal stylus touch interaction
- Suitable for replacing cracked glass or failed display assemblies
- May restore display and touchscreen functionality
- Reduces the need for screen-only frame bonding
- Suitable for professional repair technicians
- 30-day limited parts-only warranty
Original Display Specifications
The Motorola Moto G Stylus 5G 2024 was originally manufactured with a:
- 6.7-inch pOLED display
- FHD+ 2400 Ă 1080 resolution
- Approximately 395 pixels per inch
- 120Hz refresh rate
- 240Hz touch-sampling rate
- 10-bit colour support
- DCI-P3 colour-space support
- Peak brightness rated up to approximately 1,200 nits
- Optical on-screen fingerprint system
- Centred front-camera opening
A refurbished original-type pOLED panel is intended to preserve these display characteristics more closely than an aftermarket LCD conversion.
Actual refurbished-panel performance may vary according to:
- Original panel condition
- Refurbishment quality
- Replacement-glass quality
- Polarizer condition
- OLED usage history
- Panel manufacturer
- Production revision
- Installation quality
Common Screen-Failure Symptoms
Replacement may be appropriate when the phone:
- Has cracked or shattered front glass
- Shows a black or blank display
- Displays vertical or horizontal lines
- Shows spreading black OLED damage
- Displays green, white, pink, or abnormal colours
- Has screen flickering
- Has intermittent image
- Has partial or complete touchscreen failure
- Registers unintended or ghost touches
- Has inaccurate touch response
- Shows severe image retention
- Shows OLED burn-in
- Has pressure damage beneath intact outer glass
- Has damaged display edges
- Has a lifting or separated screen
- Has frame damage affecting screen fitment
- Produces an image but does not respond to touch
- Responds to touch but does not display an image
Similar symptoms may also be caused by:
- Damaged logic-board connectors
- Bent or missing connector pins
- Display-circuit failure
- Liquid ingress
- Corrosion
- Battery or power faults
- Software problems
- Previous repair damage
- Another defective component
Proper diagnosis is recommended before replacing the screen.
Refurbished Display Quality Notes
A refurbished display generally retains an original pOLED panel while replacing damaged exterior materials such as the front glass.
The refurbishment process may include:
- Separation of damaged outer glass
- Removal of old optical adhesive
- Cleaning of the original OLED panel
- Installation of replacement glass
- Optical lamination
- Bubble removal
- Frame installation
- Functional testing
Potential advantages include:
- Original-type pOLED technology
- Better black levels than LCD
- Better contrast than LCD
- Thinner construction than LCD
- Better viewing angles than LCD
- Better frame fitment than many LCD conversions
- More original-like power consumption
- More original-like colour and motion performance
- Better compatibility with the optical fingerprint system
Because the OLED panel has been previously used, a refurbished display may show variation in:
- Brightness
- Colour temperature
- White balance
- Low-brightness uniformity
- Panel age
- Image retention
- Burn-in
- Previous usage hours
- Refurbishment workmanship
- Glass finish
Refurbished Does Not Mean Brand New
This component should not be represented as a new Motorola Service Pack.
A refurbished display may retain:
- A previously used OLED panel
- Previous operating hours
- Minor brightness variation
- Minor colour variation
- Minor cosmetic marks on non-visible areas
- Internal production markings
- Previous panel revision labels
Protective films, frame surfaces, and display glass should be inspected before installation.
Minor marks on removable protective films do not necessarily indicate damage to the display glass.
pOLED Display Technology
pOLED uses an organic light-emitting display layer on a flexible substrate.
Unlike an LCD, pOLED does not require a continuously illuminated backlight. Individual pixels produce their own light.
Potential advantages include:
- True black levels
- High contrast
- Wide viewing angles
- Thin panel construction
- Fast pixel response
- Strong colour reproduction
- Improved dark-mode appearance
- Potential power efficiency with dark content
- Better fitment than thicker LCD conversion panels
The OLED panel remains sensitive to:
- Impact
- Pressure
- Bending
- Twisting
- Heat
- Liquid exposure
- Incorrect installation
- Frame distortion
Internal OLED damage can occur even when the outer glass remains intact.
Black Levels and Contrast
OLED pixels can switch off completely when displaying black content.
This provides:
- True black backgrounds
- Strong perceived contrast
- Reduced glow in dark scenes
- Better dark-mode appearance
- Improved image depth
- Better separation between bright and dark content
Test the screen using:
- Solid black backgrounds
- Dark gray backgrounds
- Low brightness
- Medium brightness
- High brightness
- Dark video scenes
Minor low-brightness variation may be present on some used or refurbished OLED panels.
Resolution and Image Quality
The original display resolution is 2400 Ă 1080.
The refurbished screen is intended to reproduce the deviceâs supported resolution when operating correctly.
Perceived sharpness may also depend on:
- Display scaling
- Font size
- Screen zoom
- Application rendering
- Video resolution
- Image quality
- Accessibility settings
- Software processing
A replacement screen cannot improve low-resolution source content.
120Hz Refresh-Rate Support
The original Moto G Stylus 5G 2024 supports a refresh rate of up to 120Hz.
A correctly functioning refurbished original-type display should support the phoneâs intended high-refresh-rate operation.
Potential benefits include:
- Smoother scrolling
- More fluid animations
- Reduced perceived motion blur
- Improved gaming responsiveness
- More natural stylus movement
- Better visual response during navigation
Refresh-rate operation may depend on:
- Display settings
- Application support
- Battery Saver
- Device temperature
- Battery level
- Software
- Content being displayed
Confirm the refresh-rate setting after installation.
A phone operating at a lower refresh rate does not automatically indicate a defective screen.
Touch-Sampling and Responsiveness
The original display supports touch sampling up to 240Hz under supported conditions.
Touch response may be affected by:
- Software
- Application
- Screen protector
- Device temperature
- Charger quality
- Battery Saver
- Installation pressure
- Display connector condition
- Refurbishment quality
Test the complete touch surface before final assembly.
Stylus Compatibility
The Moto G Stylus 5G 2024 includes an integrated passive stylus.
The stylus interacts with the capacitive touchscreen and does not use the same active digitizer technology found in certain professional pen-enabled devices.
The replacement screen should support normal stylus functions such as:
- Writing
- Drawing
- Note-taking
- Tapping
- Scrolling
- Text selection
- Handwriting input
- Supported Motorola stylus shortcuts
Stylus response may depend on:
- Touchscreen condition
- Stylus-tip condition
- Screen protector
- Software
- Application
- Touch sensitivity
- Display refresh rate
- Installation quality
A replacement screen will not repair:
- A damaged stylus
- Missing stylus
- Stylus-detection sensor faults
- Hall-sensor faults
- Software problems
- Logic-board faults
Stylus-Detection Notice
The phone contains a Hall or magnetic sensor used to detect stylus insertion or removal.
Screen replacement alone does not replace or repair this sensor.
After installation, test:
- Stylus insertion
- Stylus removal
- Stylus shortcuts
- Moto Note
- Screen-off note functions where enabled
- Stylus settings
- Stylus-loss reminders where supported
Failure to detect the stylus may be caused by a transferred component, frame alignment, sensor issue, magnet issue, software setting, or logic-board fault rather than the display.
Optical In-Display Fingerprint Sensor
The Moto G Stylus 5G 2024 uses an optical fingerprint reader beneath the display.
The sensor reads the fingerprint through the display panel.
Fingerprint operation depends on:
- Correct display technology
- OLED optical transparency
- Fingerprint-sensor condition
- Correct sensor position
- Correct internal contact
- Display bonding
- Installation quality
- Software
- Finger cleanliness
- Screen-protector type
A refurbished original-type pOLED panel generally offers better fingerprint compatibility than an LCD conversion.
Fingerprint Sensor Transfer
The fingerprint sensor may require transfer from the original phone if it is not included with the replacement frame.
Do not assume that the fingerprint sensor is included unless expressly stated.
During transfer:
- Avoid touching the optical sensing surface
- Keep the sensor clean
- Maintain correct alignment
- Avoid tearing the sensor flex cable
- Reinstall brackets and seals correctly
- Avoid trapping dust between the sensor and display
- Do not apply excessive adhesive
Incorrect sensor positioning may cause:
- Failed fingerprint enrollment
- Slow recognition
- Intermittent recognition
- Fingerprint unavailable messages
- Repeated scanning failure
Fingerprint Re-Registration and Calibration
After screen replacement, it may be necessary to:
- Delete stored fingerprints
- Clean the display
- Re-register fingerprints
- Register the same finger more than once
- Remove an incompatible screen protector
- Update the phone software
- Perform available diagnostic or calibration procedures
Calibration availability may depend on:
- Device software
- Regional firmware
- Repair tools
- Service software
- Component configuration
- Sensor condition
A refurbished display does not guarantee that an existing fingerprint-sensor fault will be repaired.
Screen-Protector Compatibility
A compatible case-friendly screen protector may be installed after the replacement display has been fully tested.
Thick, opaque, privacy, matte, poorly adhered, or low-quality protectors may affect:
- Fingerprint recognition
- Stylus response
- Touch sensitivity
- Display clarity
- Edge gestures
After installing a protector:
- Re-register fingerprints where necessary
- Test the entire touch surface
- Confirm stylus operation
- Remove bubbles over the fingerprint area
- Confirm case compatibility
Do not install a protector until display quality and touch operation have been confirmed.
Front-Camera Opening
The display assembly includes an opening for the centred front-facing camera.
Correct installation requires:
- Proper front-camera alignment
- Clean camera glass
- Correct internal bracket placement
- No dust around the camera opening
- No adhesive covering the opening
- Correct frame positioning
After installation, test:
- Front-camera image
- Photo capture
- Video recording
- Face unlock
- Camera focus
- Image clarity
- No haze or dust
The replacement screen will not repair a defective front-camera module.
Touchscreen Testing
Before final installation, test:
- Centre of the screen
- All four edges
- All four corners
- Keyboard input
- Multi-touch gestures
- Pinch-to-zoom
- Long presses
- Dragging
- Scrolling
- Notification gestures
- Navigation gestures
- Stylus input
- Touch while charging
- Touch with the intended screen protector
Touch problems may also be caused by:
- Bent connector pins
- Logic-board faults
- Housing pressure
- Poor-quality chargers
- Software
- Moisture
- Improper sensor transfer
- Frame distortion
Frame-Inclusive Assembly
This display is preinstalled into a compatible front housing frame.
Compared with a screen-only replacement, a frame assembly may provide:
- More consistent screen alignment
- Reduced display-bonding difficulty
- Better perimeter fitment
- Reduced risk of adhesive contamination
- Replacement of damaged front-frame areas
- Easier installation for equipped technicians
- More reliable display-to-frame adhesion
A frame-inclusive repair still requires substantial disassembly.
It is not a simple plug-in repair.
Components Requiring Transfer
Depending on the exact assembly contents, installation may require transferring:
- Logic board
- Battery
- Charging-port assembly
- Loudspeaker
- Earpiece speaker
- Rear cameras
- Front camera
- Fingerprint sensor
- Stylus-related components
- Side-button flex cables
- Vibration motor
- Antennas
- NFC components
- Wireless charging assembly
- Internal shields
- Thermal materials
- Brackets
- Screws
- Grounding contacts
Inspect the replacement assembly before beginning installation.
Do not assume that every component visible in a product image is included.
Frame Colour Notice
The front frame forms part of the visible exterior of the repaired phone.
Confirm the required frame colour before ordering.
Frame colour may affect:
- Side rails
- Button surrounds
- Stylus opening
- SIM-tray appearance
- Antenna-line appearance
- Overall cosmetic matching
A different colour may remain physically functional but will change the appearance of the device.
Colour shade may vary slightly from the original phone because of:
- Production batch
- Age
- Lighting
- Original-phone wear
- Refurbishment process
- Coating variation
Housing and Fitment Inspection
Before transferring components, inspect both the replacement frame and original device.
Check the replacement assembly for:
- Bends
- Dents
- Scratches
- Cracks
- Display separation
- Shipping damage
- Damaged screw threads
- Incorrect openings
- Incorrect regional layout
- Incorrect colour
- Damaged connectors
- Stylus-slot obstruction
Check the original phone for:
- Rear-housing damage
- Swollen battery
- Liquid ingress
- Corrosion
- Missing brackets
- Damaged screws
- Previous modifications
- Bent internal components
A damaged rear housing or swollen battery may prevent correct assembly even when the replacement frame is undamaged.
Installation Difficulty
Screen replacement with frame is an advanced internal repair.
The repair may require removal and transfer of:
- Rear cover
- Internal covers
- Wireless charging components
- NFC components
- Battery
- Logic board
- Cameras
- Loudspeakers
- Charging-port assembly
- Fingerprint sensor
- Side-button components
- Stylus-related parts
- Antennas
- Multiple screws and brackets
Incorrect installation may damage:
- Display
- Battery
- Logic board
- Fingerprint sensor
- Cameras
- Charging port
- Rear cover
- Flex cables
- Stylus system
- Other internal components
Professional installation is strongly recommended.
Installation Notes
Before installation:
- Confirm that the phone is a Moto G Stylus 5G 2024.
- Verify the complete XT2419 model number.
- Confirm the frame colour.
- Compare the replacement frame with the original phone.
- Inspect the OLED, glass, frame, flex cables, and connectors.
- Confirm which components are included.
- Test the phone where possible.
- Power off the phone.
- Remove the SIM and microSD tray.
- Remove the stylus.
- Disconnect the battery before connecting or disconnecting internal components.
- Organize all screws and brackets by exact location.
During installation:
- Use controlled heat and suitable opening tools.
- Avoid damaging the rear cover.
- Do not puncture, bend, crush, or overheat the battery.
- Disconnect flex cables using non-metal tools where appropriate.
- Transfer components in the correct order.
- Keep camera and fingerprint surfaces clean.
- Route flex cables exactly as originally installed.
- Reinstall all shields, contacts, brackets, and thermal materials.
- Confirm that no flex cable is trapped beneath the battery or logic board.
- Align all connectors carefully.
- Do not force connectors into place.
- Do not install screws in incorrect locations.
- Confirm that the fingerprint sensor is correctly positioned.
- Confirm that the stylus slot is unobstructed.
- Test all functions before reinstalling the rear cover.
Testing Requirements
Connect and test the display before final assembly and before removing protective films.
Verify:
- Display image
- Touch response across the complete screen
- Stylus input
- Stylus insertion and removal detection
- Low, medium, and high brightness
- Automatic brightness
- Colour consistency
- Black, white, red, green, blue, and gray backgrounds
- 120Hz operation
- No lines, flickering, spots, or OLED bleeding
- Fingerprint enrollment
- Fingerprint unlocking
- Front camera
- Rear cameras
- Face unlock
- Proximity sensor
- Earpiece speaker
- Loudspeaker
- Microphones
- Wired charging
- Wireless charging
- NFC where applicable
- Cellular signal
- Wi-Fi
- Bluetooth
- Side buttons
- Vibration
- USB-C data connection
- No abnormal heat
- No repeated restart behaviour
Do not complete final sealing until all functions have been tested.
Battery Removal and Transfer Notice
Battery removal may be hazardous.
A lithium-ion battery may ignite, vent, swell, or become damaged if it is:
- Punctured
- Bent
- Crushed
- Overheated
- Short-circuited
- Removed using unsuitable tools
Do not reuse a battery that is:
- Swollen
- Punctured
- Bent
- Leaking
- Overheated
- Physically damaged
- Behaving abnormally
Battery adhesive and replacement installation materials are not included unless expressly stated.
Pressure and OLED Damage Notice
OLED panels are sensitive to pressure even when the outer glass remains intact.
Pressure may be caused by:
- Swollen batteries
- Bent frames
- Internal debris
- Misplaced screws
- Incorrect brackets
- Trapped flex cables
- Excessive adhesive
- Forceful assembly
- Tight protective cases
- Impact
- Twisting
Pressure damage may cause:
- Black spots
- Coloured lines
- OLED bleeding
- Flickering
- Partial image
- Touch failure
- No image
Pressure, impact, bending, or installation damage is not considered a manufacturing defect.
Rear-Cover Adhesive
Installation generally requires removing the rear cover.
The original rear adhesive normally cannot be relied upon after removal.
New rear-cover adhesive should be used during final assembly.
Rear-cover adhesive is not included unless expressly stated.
Water-Resistance Notice
Opening and repairing the phone compromises its original factory seal.
New adhesive may help reduce exposure to dust and incidental moisture, but the original water-repellent performance cannot be restored or guaranteed after repair.
Avoid exposing the repaired device to:
- Water
- Rain
- Steam
- High humidity
- Condensation
- Swimming pools
- Showers
- Liquid spills
Liquid damage is not covered by the component warranty.
No Tools or Adhesive Included
This listing includes the selected refurbished display assembly with frame only unless expressly stated otherwise.
The following are not included unless specifically shown or identified:
- Phone
- Battery
- Rear cover
- Rear-cover adhesive
- Battery adhesive
- Fingerprint sensor
- Stylus
- Camera modules
- Charging-port assembly
- Speakers
- Logic board
- Repair tools
- Screwdrivers
- Calibration equipment
- Installation service
- Diagnostic service
Inspect the package contents before beginning installation.
30-Day Limited Parts-Only Warranty
This refurbished screen assembly includes a 30-day limited parts-only warranty against confirmed manufacturing or refurbishment defects, subject to the applicable 3C-Easy Markham Component Warranty.
The warranty does not cover:
- Installation labour
- Removal labour
- Diagnostic charges
- Calibration charges
- Shipping costs
- Damage to the phone
- Data loss
- Incorrect model selection
- Incorrect frame-colour selection
- Incorrect regional selection
- Cracked, chipped, or scratched glass
- Internal OLED damage
- Black spots, lines, or bleeding caused by pressure or impact
- New burn-in or image retention caused by use
- Minor variation inherent to refurbished OLED panels
- Torn, folded, punctured, stretched, or damaged flex cables
- Bent or damaged connectors
- Bent or missing logic-board connector pins
- Damage caused during component transfer
- Damage caused by incorrect screw placement
- Damage caused by excessive heat
- Damage caused by a swollen or defective battery
- Damage caused by unsuitable tools
- Impact, pressure, bending, or twisting damage
- Liquid, moisture, or corrosion damage
- Fingerprint-sensor faults unrelated to the display
- Fingerprint issues caused by sensor transfer or incompatible protectors
- Stylus or stylus-detection faults unrelated to the display
- Logic-board or power-circuit faults
- Software or calibration issues
- Damage to transferred components
- Improper installation
- Removed, altered, or damaged warranty labels
The screen must be connected and fully tested before final installation.
Protective films should remain in place until display, touch, stylus, fingerprint, brightness, refresh-rate, and fitment performance have been confirmed.
Warranty coverage applies only to the supplied component and does not include labour, installation, removal, calibration, data loss, or damage to other parts of the device.
Important Notes
- Refurbished replacement screen with frame
- Designed for Motorola Moto G Stylus 5G 2024
- Compatible with XT2419 variants where the physical layout matches
- Known variants include XT2419-1, XT2419-2, XT2419-3, and XT2419V
- Refurbished original-type pOLED display
- 6.7-inch FHD+ 2400 Ă 1080 display
- Designed to support up to 120Hz refresh operation
- Integrated capacitive touchscreen digitizer
- Preinstalled into a compatible front frame
- Designed for normal passive stylus input
- Designed for optical in-display fingerprint compatibility
- Fingerprint sensor may require transfer
- Stylus is not included
- Not a new Motorola Service Pack
- Not an aftermarket LCD conversion
- Refurbished OLED panels may show minor variation
- Internal components require transfer from the original phone
- Advanced installation is required
- Professional installation is strongly recommended
- Test all functions before final sealing
- No tools or adhesive included unless expressly stated
- Water resistance cannot be guaranteed after repair
- Product appearance, markings, and packaging may vary
Intellectual Property Disclaimer
Motorola, Moto, Moto G, Moto G Stylus, TurboPower, Android, pOLED, and related names, logos, and trademarks belong to their respective owners.
3C-Easy Markham is not affiliated with, authorized by, sponsored by, or endorsed by Motorola Mobility LLC or Lenovo.
All product names and model references are used solely to identify product compatibility.
files/Replacement-Screen-for-Motorola-G-Stylus-5G-2024-_XT-2419_-3C-Easy-Markham-138159712.png
files/Replacement-Screen-for-Motorola-G-Stylus-5G-2024-_XT-2419_-3C-Easy-Markham-138159864.png
files/Replacement-Screen-for-Motorola-G-Stylus-5G-2024-_XT-2419_-3C-Easy-Markham-138159948.png
files/Replacement-Screen-for-Motorola-G-Stylus-5G-2024-_XT-2419_-3C-Easy-Markham-138160079.png
