Samsung S23 FE 5G Replacement Screen

Genuine Samsung Service Pack Replacement Screen Without Frame for Galaxy S23 FE 5G

Restore display image, touchscreen operation, adaptive refresh-rate performance, and in-display fingerprint functionality on a compatible Samsung Galaxy S23 FE 5G with this genuine Samsung Service Pack replacement screen assembly supplied without frame.

The Samsung Galaxy S23 FE uses a flat 6.4-inch FHD+ Dynamic AMOLED 2X display with a resolution of 2340 × 1080 pixels and refresh-rate operation up to 120 Hz.

This Service Pack replacement is intended for customers and repair professionals seeking genuine Samsung display quality, brightness, colour reproduction, touch response, fingerprint-sensor compatibility, panel thickness, and overall performance closest to the original factory-installed screen.

This screen is supplied without a middle frame. The original frame must be reused, and the replacement display must be aligned and bonded into the housing using suitable screen adhesive.

The original housing must be straight, clean, and free from dents, adhesive buildup, glass fragments, corrosion, or internal pressure points before installation.

Compatible Models

Samsung Galaxy S23 FE 5G

• SM-S711W — Canadian version
• SM-S711U — United States carrier version
• SM-S711U1 — United States factory-unlocked version
• SM-S711B
• SM-S711B/DS — International dual-SIM version
• SM-S7110
• SM-S711N
• Other compatible SM-S711 regional variants where the display connector, frame dimensions, fingerprint-sensor position, and internal layout match

Please confirm the complete model number before ordering.

The model number can normally be checked under:

Settings > About Phone > Model Name or Model Number

It may also appear on:

• Original packaging
• Purchase documentation
• Device information labels
• Carrier account records
• Internal service labels

Do not select this component based only on the Galaxy S23 FE name. Regional models may differ in:

• Cellular antenna layout
• mmWave hardware
• SIM and eSIM configuration
• Internal brackets
• Connector revisions
• Frame openings
• Supporting components
• Service-part revisions

Available Option

Genuine Samsung Service Pack OLED Screen Without Frame

This option includes:

• Genuine Samsung Dynamic AMOLED 2X display
• Integrated capacitive touchscreen
• Display flex cable
• Genuine Samsung service replacement screen
• Screen assembly without middle frame

The original middle frame must be reused.

No frame, battery, adhesive, tools, clamps, fingerprint sensor, cameras, or installation service is included unless specifically stated.

Key Features

• Genuine Samsung Service Pack replacement display
• Designed for compatible Samsung Galaxy S23 FE 5G models
• Compatible with selected SM-S711 regional variants
• Supplied without middle frame
• Flat 6.4-inch display format
• FHD+ 2340 × 1080 resolution
• Dynamic AMOLED 2X display technology
• Designed to support refresh rates up to 120 Hz
• Integrated capacitive touchscreen
• Designed to support in-display fingerprint recognition
• Original-style true black levels
• High OLED contrast
• Wide viewing angles
• Factory-style colour reproduction
• Designed to restore image, touch, and fingerprint operation
• Genuine Samsung service replacement quality
• Requires bonding into the original housing
• Professional installation strongly recommended

Common Screen-Failure Symptoms

Replacement may be appropriate when the phone:

• Has cracked or shattered front glass
• Displays no image
• Shows green, white, pink, or vertical lines
• Has black spots or spreading OLED damage
• Shows screen bleeding or discolouration
• Produces flickering or intermittent images
• Has reduced or uneven brightness
• Shows image distortion
• Displays an image but does not respond to touch
• Has areas of missing or inaccurate touch response
• Registers unintended or ghost touches
• Produces sounds or vibrations while the display remains black
• Has internal OLED damage without an external glass crack
• Has damaged display edges
• Has separated display layers
• Has failed after impact, pressure, bending, twisting, or liquid exposure
• Shows abnormal refresh-rate behaviour
• Has fingerprint-recognition problems caused by display damage

These symptoms may also be caused by:

• Logic-board damage
• Display-connector damage
• Liquid ingress or corrosion
• Battery failure
• Charging or power-management faults
• Damaged fingerprint-sensor hardware
• Software or firmware issues
• Damaged internal flex cables
• Incorrect installation
• Another defective component

Proper diagnosis is recommended before replacing the display.

Samsung Service Pack Quality Notes

This product is a genuine Samsung replacement display supplied through Samsung’s service-parts distribution channel.

A Samsung Service Pack screen is generally the preferred option for customers seeking:

• Genuine Samsung display construction
• Factory-style brightness
• Original-style colour accuracy
• Consistent touchscreen response
• Original-style refresh-rate operation
• Strong fingerprint-sensor compatibility
• Original-style panel thickness
• Original housing fitment
• More predictable long-term performance than aftermarket or refurbished alternatives

Packaging, labels, protective films, part numbers, installed small components, and service-part revision may vary by Samsung distribution region and production batch.

A genuine Samsung Service Pack screen is intended to provide performance closest to the original factory-installed display, but exact visual calibration may still vary slightly between individual panels and software versions.

Dynamic AMOLED 2X Display Characteristics

The Galaxy S23 FE uses a Dynamic AMOLED 2X display rather than an LCD panel.

OLED pixels illuminate individually and do not require a conventional separate backlight.

Potential benefits include:

• True black levels
• High contrast
• Wide viewing angles
• Strong dark-scene performance
• Thin display construction
• Fast pixel response
• Efficient operation with darker screen content
• Smooth high-refresh-rate performance
• Original-style Always-On Display presentation

OLED panels are sensitive to:

• Impact
• Pressure
• Bending
• Twisting
• Internal debris
• Uneven frame surfaces
• Excessive heat
• Incorrect adhesive application
• Battery swelling
• Incorrect screw placement
• Improper alignment

Internal OLED damage may occur even when the outer glass remains intact.

Flat Display and Housing Fitment Notice

The Galaxy S23 FE uses a flat display panel.

Although the flat design simplifies edge alignment compared with curved displays, the OLED panel remains rigid and pressure-sensitive.

Before installation, confirm that the original housing is:

• Straight
• Free from dents
• Free from twisted corners
• Free from raised metal edges
• Free from glass fragments
• Free from old adhesive
• Free from corrosion
• Free from internal debris
• Suitable for accurate panel alignment

A bent or damaged frame may cause:

• Internal OLED pressure damage
• Black spots
• Vertical lines
• Touch failure
• Fingerprint-recognition problems
• Raised screen edges
• Uneven gaps
• Premature adhesive failure
• Cracked glass
• Screen separation

Do not force the replacement screen into a bent or damaged housing.

Refresh-Rate Notice

The Galaxy S23 FE is designed to support refresh-rate operation up to 120 Hz.

Actual refresh-rate behaviour may depend on:

• Display settings
• Power Saving Mode
• Displayed content
• Device temperature
• Battery condition
• Software version
• Firmware configuration
• Replacement-screen revision
• Logic-board condition

After installation, test:

• Standard display operation
• Scrolling smoothness
• Touch responsiveness
• Motion clarity
• Refresh-rate behaviour
• Low- and high-brightness operation
• Always-On Display
• Video playback
• Gaming performance
• Screen wake and sleep
• Battery drain during normal use

A refresh-rate problem does not automatically confirm that the replacement screen is defective.

Touchscreen Notice

The replacement screen includes an integrated capacitive touchscreen layer.

After installation, test:

• Standard taps
• Swipe gestures
• Long presses
• Pinch-to-zoom
• Edge and corner response
• Keyboard input
• Gesture navigation
• Notification-panel access
• App navigation
• Multi-touch input
• Touch operation while charging
• Touch sensitivity settings where applicable

Touch problems may also be caused by:

• Damaged display connectors
• Bent connector pins
• Logic-board faults
• Incorrect screen alignment
• Excessive adhesive pressure
• Housing distortion
• Poor-quality chargers
• Software problems
• Another defective component

In-Display Fingerprint-Sensor Notice

The Galaxy S23 FE uses an in-display fingerprint sensor positioned beneath the display.

The fingerprint sensor is a separate internal component and is not normally included with the replacement screen.

After installation:

• Confirm the fingerprint sensor is correctly positioned.
• Ensure the sensor surface is clean.
• Confirm all brackets, pads, and cushioning materials are installed correctly.
• Ensure no debris or excessive adhesive is present between the sensor and display.
• Delete and re-enrol fingerprints where necessary.
• Test fingerprint recognition repeatedly.
• Test with and without a screen protector where applicable.

Fingerprint performance may be affected by:

• Incorrect sensor alignment
• Damaged sensor hardware
• Missing brackets or pads
• Excessive adhesive
• Internal pressure
• Dry or damaged skin
• Thick or incompatible screen protectors
• Software configuration
• Logic-board faults
• Installation damage

Fingerprint recognition cannot be guaranteed when the original sensor is damaged or improperly installed.

Always-On Display Notice

After installation, test:

• Always-On Display visibility
• Screen wake
• Tap to Wake
• Lift to Wake
• Brightness transitions
• Lock-screen operation
• Notification display
• Battery consumption

Always-On Display behaviour may also depend on:

• Software version
• Display settings
• Power Saving Mode
• Battery condition
• Device temperature
• Logic-board condition

Without-Frame Installation Notice

This screen is supplied without a replacement middle frame.

The original frame must be:

• Structurally straight
• Free from dents and bends
• Free from old adhesive
• Free from glass fragments
• Free from corrosion
• Clean around the bonding surface
• Suitable for accurate alignment

Installing the replacement screen into a damaged frame may cause:

• Raised edges
• Uneven gaps
• Internal OLED pressure
• Black spots
• Display lines
• Touch problems
• Fingerprint-recognition problems
• Screen separation
• Flex-cable stress
• Cracked glass
• Premature failure

Do not force the panel into a damaged housing.

Adhesive and Bonding Notice

A without-frame display must be bonded into the original housing using suitable model-specific screen adhesive.

Proper installation requires:

• Complete removal of old adhesive
• Removal of broken glass and debris
• Cleaning of the housing bonding surface
• Inspection for frame distortion
• Dry fitting before adhesive application
• Correct screen alignment
• Correct display-flex routing
• Even pressure during curing
• Full functional testing before permanent bonding

Poor adhesive installation may result in:

• Raised screen edges
• Uneven gaps
• Dust entry
• Moisture entry
• Display movement
• Touch problems
• Fingerprint-recognition issues
• Flex-cable stress
• Premature separation

No adhesive, clamps, tools, or installation materials are included unless specifically stated.

Frame Inspection Notice

Before installation, inspect the original frame for:

• Bent corners
• Distorted side rails
• Raised metal edges
• Old glass fragments
• Adhesive residue
• Corrosion
• Missing brackets
• Damaged screw posts
• Misaligned components
• Debris beneath the panel
• Battery swelling
• Pressure points near the fingerprint sensor
• Pressure points around the display perimeter

Even minor frame deformation may place damaging pressure against the OLED panel.

The replacement screen should not be permanently bonded until the frame has been confirmed straight and suitable for reuse.

Battery and Internal-Pressure Notice

Inspect the battery before installing the replacement display.

Do not continue installation when the battery shows:

• Swelling
• Deformation
• Puncture damage
• Leakage
• Torn wrapping
• Unusual odour
• Excessive heat
• Pressure against the display

A swollen or damaged battery may cause:

• Internal OLED pressure damage
• Black spots
• Display lines
• Touch failure
• Fingerprint-recognition problems
• Screen lifting
• Cracked glass
• Short circuits
• Excessive heat
• Fire or chemical hazards
• Logic-board damage

Replace a swollen or physically damaged battery before installing the screen.

Regional and Service-Part Compatibility Notice

Galaxy S23 FE models sold in different regions may use different:

• Cellular antenna layouts
• mmWave hardware
• SIM configurations
• Internal brackets
• Connector revisions
• Display service-part numbers
• Supporting components
• Frame details

Before installation, compare:

• Complete SM-S711 model number
• Display dimensions
• Flex-cable shape
• Connector position
• Printed Samsung part numbers
• Fingerprint-sensor location
• Frame shape
• Internal clearances

Installing an incompatible display revision may cause:

• No image
• Failed touch
• Fingerprint-recognition failure
• Intermittent operation
• Poor fitment
• Connector damage
• Flex-cable damage
• Internal pressure
• Logic-board damage

Model Compatibility Notice

This replacement screen is intended only for the Samsung Galaxy S23 FE 5G.

It is not intended for:

• Samsung Galaxy S23
• Samsung Galaxy S23+
• Samsung Galaxy S23 Ultra
• Samsung Galaxy S24 FE
• Samsung Galaxy S22 FE
• Other Galaxy S-series models

Similar screen size, flat design, or external appearance does not confirm compatibility.

Before ordering, confirm:

• The phone is a Galaxy S23 FE.
• The model number begins with SM-S711.
• The display-flex and connector layout match.
• The screen dimensions match.
• The fingerprint-sensor position matches.
• The original frame is suitable for reuse.

Installation Notes

Professional installation is strongly recommended.

Replacing a genuine OLED screen without frame requires controlled heat, precision tools, careful panel removal, thorough frame preparation, adhesive application, and accurate alignment.

Improper handling may damage:

• Genuine Samsung OLED display
• Touchscreen
• Display flex cable
• Logic board
• Battery
• Fingerprint sensor
• Cameras
• Charging-port components
• Wireless-charging coil
• NFC components
• Antennas
• Speakers
• Microphones
• Internal connectors
• Original frame

Before final installation:

• Confirm the complete SM-S711 model number.
• Confirm the Samsung service-part revision.
• Compare the replacement screen with the original display.
• Inspect the glass, OLED panel, flex cable, and connector.
• Inspect the original frame for bends, dents, corrosion, or debris.
• Inspect the battery for swelling.
• Power off the phone.
• Use controlled heat when removing the damaged display.
• Avoid inserting tools excessively deep.
• Disconnect the battery before connecting or disconnecting the display.
• Remove all broken glass and old adhesive.
• Clean the frame bonding surface thoroughly.
• Avoid bending, folding, puncturing, or stretching the display flex cable.
• Do not flex the OLED panel.
• Do not force the connector into place.
• Route the display flex without pinching or twisting it.
• Confirm correct fingerprint-sensor position.
• Dry fit the screen before applying adhesive.
• Test the screen before permanent bonding.
• Test black, white, grey, red, green, and blue backgrounds.
• Test brightness at low and high levels.
• Test automatic brightness.
• Test refresh-rate operation.
• Test Always-On Display.
• Test touch response across the complete screen.
• Test all edges and corners.
• Test multi-touch gestures.
• Test fingerprint recognition.
• Test the front and rear cameras.
• Test proximity and ambient-light functions.
• Test the earpiece speaker and loudspeaker.
• Test all microphones.
• Test vibration.
• Test wired charging and USB connectivity.
• Test wireless charging.
• Test NFC where applicable.
• Test Wi-Fi, Bluetooth, cellular reception, 5G, and GPS.
• Check for overheating or abnormal battery drain.
• Confirm the screen sits evenly in the frame.
• Apply suitable adhesive only after all functions have been tested.
• Use even pressure while the adhesive cures.
• Do not permanently seal the phone until compatibility and functionality are confirmed.

Bent connector pins, damaged sockets, torn flex cables, excessive heat, pressure, poor adhesive application, or incorrect alignment may permanently damage the screen or phone.

Water-Resistance Notice

Opening the Samsung Galaxy S23 FE compromises its original factory adhesive and water-resistant sealing.

Replacement adhesive may help reduce exposure to dust and incidental moisture, but the original IP rating and factory water resistance cannot be restored or guaranteed after repair.

A repaired device should not be relied upon for:

• Swimming
• Showering
• Underwater photography
• Exposure to steam
• Heavy rain
• High-humidity environments
• Other intentional liquid exposure

Sealing performance may be reduced by:

• Frame damage
• Adhesive quality
• Improper cleaning
• Uneven pressure
• Display variation
• Component misalignment
• Previous repairs
• Corrosion
• Production tolerances

Avoid exposing the repaired device to water, steam, high humidity, or other liquids.

Package Contents

• 1 × Genuine Samsung Service Pack replacement screen for Galaxy S23 FE 5G

The following are not included unless specifically stated:

• Middle frame
• Battery
• Fingerprint sensor
• Cameras
• Charging-port assembly
• Wireless-charging coil
• NFC components
• Adhesive
• Tools
• Clamps
• Installation materials
• Installation service

Warranty

This component includes a 30-day limited parts-only warranty against confirmed manufacturing defects, subject to the applicable 3C-Easy Markham Component Warranty.

The warranty does not cover:

• Cracked, chipped, scratched, or shattered glass
• Internal OLED damage
• Black spots, lines, bleeding, or discolouration caused by impact or pressure
• Touch failure caused by installation damage
• Fingerprint-recognition problems caused by the original sensor, alignment, adhesive, screen protectors, software, or unrelated hardware
• Damage caused by a bent or damaged frame
• Damage caused by a swollen battery
• Damage caused by excessive adhesive or uneven bonding pressure
• Brightness, colour, or refresh-rate problems caused by software, settings, temperature, or logic-board faults
• Torn, folded, punctured, stretched, or damaged flex cables
• Bent connector pins or damaged logic-board sockets
• Incorrect model, region, or service-part revision selection
• Installation in an incompatible device
• Improper installation
• Physical, impact, pressure, bending, or twisting damage
• Liquid, moisture, or corrosion damage
• Damage caused by excessive heat
• Adhesive or sealing failure
• Water-resistance limitations
• Display faults caused by the logic board
• Software, firmware, calibration, pairing, or compatibility limitations
• Damage to the battery, frame, fingerprint sensor, or other components during installation
• Labour, diagnostics, programming, installation, removal, shipping, or related repair costs

The screen must be connected and fully tested before permanent installation.

Remove protective films only after confirming correct image, touch, brightness, refresh-rate behaviour, fingerprint recognition, compatibility, alignment, and fitment.

Screens showing installation marks, adhesive residue, flex-cable damage, pressure damage, scratched coating, or other physical damage may not qualify for warranty coverage.

Important Notes

• Genuine Samsung Service Pack replacement screen for Galaxy S23 FE 5G.
• Intended for compatible SM-S711 model variants.
• Supplied without middle frame.
• Confirm the complete model number before ordering.
• Confirm the Samsung service-part revision before installation.
• This screen is not compatible with the Galaxy S23, S23+, or S23 Ultra.
• Genuine Samsung Dynamic AMOLED 2X display.
• Designed to support refresh rates up to 120 Hz.
• Designed to support in-display fingerprint recognition when correctly installed.
• The original frame must be straight, clean, and suitable for reuse.
• The original fingerprint sensor is not included.
• Screen adhesive is not included unless specifically stated.
• No tools or installation materials are included.
• Inspect the battery for swelling before installation.
• Test image, touch, brightness, refresh rate, fingerprint recognition, cameras, sensors, charging, wireless charging, NFC, audio, vibration, and connectivity before permanent bonding.
• Original water resistance cannot be restored or guaranteed after repair.
• Professional installation is strongly recommended.
• Product appearance, labels, protective films, service-part numbers, flex layout, and packaging may vary between production batches.

Samsung, Galaxy, Galaxy S, Dynamic AMOLED, and related trademarks belong to Samsung Electronics Co., Ltd. and are used only to identify product compatibility. 3C-Easy Markham is not affiliated with or endorsed by Samsung Electronics.