Samsung S23 Plus 5G Replacement Screen

Samsung Galaxy S23+ 5G Replacement Screen with Frame

Restore display quality, touchscreen operation, and front-frame fitment on a compatible Samsung Galaxy S23+ 5G with this replacement screen assembly supplied with a preinstalled frame.

The Samsung Galaxy S23+ uses a flat 6.6-inch FHD+ Dynamic AMOLED 2X display with a resolution of 2340 × 1080 and a maximum refresh rate of 120 Hz. This listing offers two original-display options: a refurbished original OLED screen with frame and a genuine Samsung Service Pack screen with frame.

Both options are intended for customers and repair professionals seeking display quality, colour reproduction, brightness, touch response, refresh-rate performance, fingerprint-sensor compatibility, and housing fitment closer to the original factory screen than typical aftermarket alternatives.

Because the display is already installed in a compatible middle frame, there is no need to separate and rebond the OLED panel to the original damaged frame. However, most internal components from the original phone must still be transferred during installation.

Please specify in the order if the color is not listed.

Compatible Models

Samsung Galaxy S23+ 5G

• SM-S916W — Canadian version
• SM-S916U — United States carrier version
• SM-S916U1 — United States factory-unlocked version
• SM-S916B
• SM-S916B/DS — International dual-SIM version
• SM-S9160
• Other compatible SM-S916 regional variants where the screen revision, antenna configuration, frame design, and connector layout match

Samsung identifies the Canadian Galaxy S23+ as model SM-S916W. International and regional variants include model families such as SM-S916B/DS and SM-S9160.

Please confirm the complete model number under Settings > About Phone, on the original packaging, or on the device label before ordering.

Do not select this component based only on the Galaxy S23+ name. Regional versions may differ in:

• Cellular antenna placement
• 5G and mmWave antenna hardware
• Internal brackets
• Side-button flex cables
• SIM configurations
• Frame openings
• Connector layouts
• Component mounting positions
• Available frame colours

Available Options

Refurbished Original OLED Screen with Frame

This option uses an original Samsung OLED display panel that has been professionally restored and installed into a compatible replacement frame.

The refurbishment process may include:

• Removal of damaged outer glass
• Installation of replacement cover glass
• Replacement of optical adhesive
• Cleaning and reconditioning of the original OLED panel
• Replacement or restoration of touch-related layers where required
• Inspection of display flex cables and connectors
• Testing of image and touchscreen functionality
• Testing of brightness and refresh-rate behaviour
• Installation into a compatible replacement frame

This option is intended to provide original-style OLED performance at a lower cost than a new genuine Samsung Service Pack assembly.

Genuine Samsung Service Pack Screen with Frame

This option is a genuine Samsung replacement display assembly supplied through Samsung’s service-parts distribution channel.

A Samsung Service Pack assembly is generally the preferred option for customers seeking:

• Genuine Samsung replacement components
• Factory-style Dynamic AMOLED display performance
• Original brightness and colour characteristics
• Original-style adaptive refresh-rate operation
• Consistent touchscreen response
• Reliable ultrasonic fingerprint-sensor compatibility
• Factory-style frame construction
• More consistent cosmetic condition
• More predictable long-term performance than refurbished components

Packaging, labels, installed small parts, frame colour, and included components may vary by Samsung distribution region and production batch.

Frame-Colour Selection

The display assembly may be available with frames corresponding to original Galaxy S23+ finishes.

Possible colours may include:

• Phantom Black
• Cream
• Green
• Lavender
• Graphite
• Lime
• Other regional or limited-edition colours

Availability varies.

Confirm the selected frame colour before ordering. Frame shades may show minor variation due to lighting, manufacturing batches, previous use, refurbishment, or differences between the original phone and replacement assembly.

Key Features

• Replacement screen assembly for Samsung Galaxy S23+ 5G
• Compatible with selected SM-S916 regional variants
• Supplied with a preinstalled middle frame
• Available as refurbished original OLED or genuine Samsung Service Pack
• Integrated capacitive touchscreen
• 6.6-inch display format
• FHD+ 2340 × 1080 resolution
• Dynamic AMOLED 2X display technology
• Designed to support adaptive refresh rates up to 120 Hz
• Original-style true black levels
• High OLED contrast
• Wide viewing angles
• Designed to support ultrasonic in-display fingerprint recognition when properly installed
• Designed to restore image and touchscreen operation
• May resolve cracked glass, failed touch, damaged OLED, lines, black spots, or display failure
• Framed construction may simplify installation compared with a panel-only replacement
• Professional installation strongly recommended

Common Screen-Failure Symptoms

Replacement may be appropriate when the phone:

• Has cracked or shattered front glass
• Displays no image
• Shows green, white, pink, or vertical lines
• Has black spots or spreading OLED damage
• Shows screen bleeding or discolouration
• Flickers or produces intermittent images
• Has reduced or uneven brightness
• Shows image distortion
• Has areas of missing or inaccurate touch response
• Registers unintended or ghost touches
• Displays an image but does not respond to touch
• Produces sounds or vibrations while the display remains black
• Has internal OLED damage without an external glass crack
• Has a bent or damaged original display frame
• Does not seat properly because of housing damage
• Has failed after impact, pressure, twisting, or liquid exposure
• Shows abnormal refresh-rate behaviour
• Has fingerprint-recognition problems related to display damage

These symptoms may also be caused by:

• Logic-board damage
• Display-connector damage
• Liquid ingress or corrosion
• Battery failure
• Software or firmware faults
• Damaged internal flex cables
• Ultrasonic fingerprint-sensor damage
• Incorrect installation
• Another defective component

Proper diagnosis is recommended before replacing the display assembly.

Refurbished Original OLED Quality Notes

The refurbished option uses an original Samsung OLED panel that has previously been installed or used and has undergone professional restoration.

Because the OLED panel is refurbished, minor variation may be present in:

• Cosmetic condition
• Maximum brightness
• Colour temperature
• White balance
• Display uniformity
• Low-brightness performance
• Existing image retention
• Oleophobic coating
• Cover-glass finish
• Edge appearance
• Refurbishment adhesive
• Component markings
• Touch sensitivity
• Adaptive refresh-rate consistency
• Long-term reliability

Minor cosmetic or performance variation that does not materially affect normal operation may be consistent with the refurbished nature of the component.

A refurbished original OLED screen is not equivalent to a brand-new genuine Samsung Service Pack display.

Samsung Service Pack Quality Notes

The Service Pack option is intended to provide the closest available replacement to the original factory-installed screen assembly.

Depending on the specific Service Pack and distribution region, the assembly may include:

• Genuine Samsung OLED display
• Integrated touchscreen
• Preinstalled middle frame
• Side-button components
• Volume-button components
• Meshes or seals
• Adhesive elements
• Small brackets
• Internal hardware

Included components may vary. Do not assume the assembly includes every internal part required to complete the repair.

The battery, cameras, charging-port assembly, loudspeaker, earpiece speaker, vibration motor, wireless-charging coil, fingerprint sensor, antennas, logic board, back cover, and other internal components are not included unless specifically stated.

OLED Display Characteristics

OLED displays illuminate individual pixels and do not require a traditional separate backlight.

Potential benefits include:

• True black levels
• High contrast
• Wide viewing angles
• Strong dark-scene performance
• Thin panel construction
• Fast pixel response
• Efficient operation with darker screen content
• Original-style Always-On Display presentation
• Smooth high-refresh-rate performance

OLED panels are sensitive to:

• Impact
• Pressure
• Bending
• Twisting
• Internal debris
• Excessive heat
• Uneven frame surfaces
• Incorrectly positioned components
• Battery swelling

Internal OLED damage may occur even when the outer glass remains intact.

Adaptive Refresh-Rate Notice

The Galaxy S23+ display supports refresh rates up to 120 Hz. Actual refresh-rate behaviour may depend on device settings, displayed content, software, temperature, battery condition, and power-saving configuration.

After installation, test:

• Standard display operation
• Scrolling smoothness
• Touch responsiveness
• Motion clarity
• Adaptive refresh-rate behaviour
• Power Saving Mode
• Always-On Display
• Low- and high-brightness operation
• Video playback
• Screen wake and sleep
• Battery drain during normal use

Refresh-rate issues may also be caused by:

• Device settings
• Power Saving Mode
• Software or firmware
• Overheating
• Battery condition
• Logic-board faults
• Incompatible display revisions
• Installation damage

A refresh-rate problem does not automatically confirm that the replacement display is defective.

Touchscreen Notice

The display assembly includes an integrated capacitive touchscreen layer.

After installation, test:

• Standard taps
• Swipe gestures
• Long presses
• Pinch-to-zoom
• Edge and corner response
• Keyboard input
• Gesture navigation
• Notification-panel access
• App navigation
• Multi-touch input
• Touch operation while charging

Touch problems may also be caused by:

• Damaged display connectors
• Bent connector pins
• Logic-board faults
• Incorrect screen alignment
• Internal pressure
• Housing distortion
• Incompatible charging accessories
• Software problems
• Another defective component

Ultrasonic Fingerprint-Sensor Notice

The Samsung Galaxy S23+ uses an ultrasonic fingerprint sensor positioned beneath the display.

The fingerprint sensor is a separate internal component and may need to be transferred from the original frame unless it is specifically included with the selected assembly.

After installation:

• Confirm that the fingerprint sensor is correctly positioned.
• Ensure no debris or excessive adhesive is present between the sensor and display.
• Confirm that the sensor bracket and cushioning materials are installed correctly.
• Delete and re-enrol stored fingerprints where necessary.
• Test fingerprint recognition across multiple attempts.
• Test with and without a screen protector where applicable.

Fingerprint recognition may be affected by:

• Incorrect sensor alignment
• Damaged sensor hardware
• Missing brackets or cushioning materials
• Excessive adhesive
• Thick or incompatible screen protectors
• Dry or damaged skin
• Software configuration
• Logic-board faults
• Incompatible display revisions
• Installation pressure
• Refurbished-glass thickness or bonding variation

Fingerprint recognition cannot be guaranteed when the original sensor is damaged or improperly transferred.

Frame and Internal-Component Transfer Notice

This display is supplied with a frame, but installation still requires transferring compatible internal components from the original phone.

Components that may require transfer include:

• Logic board
• Battery
• Charging-port assembly
• Front-facing camera
• Rear-camera assemblies
• Earpiece speaker
• Loudspeaker
• Vibration motor
• Wireless-charging coil
• NFC components
• Ultrasonic fingerprint sensor
• Side-button flex cables
• Antenna components
• SIM-related hardware
• Thermal pads
• Brackets
• Screws
• Adhesive elements

The exact transfer requirements depend on which components are preinstalled in the selected screen assembly.

Compare the replacement assembly with the original device before beginning installation.

Frame Fitment Notice

A screen-with-frame repair generally reduces the risk associated with separating and rebonding an OLED panel, but proper fitment still depends on:

• Correct regional frame selection
• Accurate transfer of internal components
• Proper screw placement
• Correct antenna installation
• Correct flex-cable routing
• Undamaged internal brackets
• Proper back-cover preparation
• Complete removal of old adhesive
• Suitable replacement adhesive
• Even pressure during curing

Incorrect assembly may cause:

• Raised back-cover edges
• Display pressure
• Antenna or reception problems
• Button misalignment
• Charging problems
• Camera alignment issues
• Wireless-charging failure
• Overheating
• Touch problems
• Internal OLED damage
• Premature separation

Battery and Internal-Pressure Notice

Inspect the battery before transferring it into the replacement frame.

Do not reuse a battery showing:

• Swelling
• Deformation
• Puncture damage
• Leakage
• Overheating
• Torn wrapping
• Unusual odour
• Pressure against the display or back cover

A swollen or damaged battery may cause:

• Internal OLED pressure damage
• Cracked glass
• Screen lifting
• Back-cover separation
• Touch failure
• Short circuits
• Excessive heat
• Fire or chemical hazards
• Logic-board damage

Replace a swollen or physically damaged battery before completing the screen repair.

Regional and 5G Compatibility Notice

Galaxy S23+ models sold in different regions may use different:

• 5G antenna layouts
• Cellular antenna modules
• SIM configurations
• Internal brackets
• Frame cut-outs
• Button components
• Flex cables
• mmWave hardware
• Connector arrangements

A frame intended for one region may physically resemble another version while lacking the correct mounting points, antenna openings, or supporting components.

Before installation, compare:

• Complete model number
• Frame shape
• Antenna openings
• Flex-cable layout
• Button positions
• SIM-tray position
• Internal mounting posts
• Printed part numbers
• Connector locations
• Camera openings
• Wireless-charging and NFC clearances

Installing an incompatible frame may result in poor reception, failed 5G operation, incorrect fitment, damaged flex cables, missing mounting points, or other functional problems.

Model Compatibility Notice

This replacement assembly is intended for the standard Samsung Galaxy S23+ 5G.

It is not intended for:

• Samsung Galaxy S23
• Samsung Galaxy S23 FE
• Samsung Galaxy S23 Ultra
• Samsung Galaxy S22+
• Samsung Galaxy S24+
• Other Galaxy S-series models

Screen assemblies are not interchangeable merely because two phones have similar display sizes or external appearances.

Before ordering, confirm:

• The device is a Samsung Galaxy S23+ 5G.
• The model number begins with SM-S916.
• The regional frame version is compatible.
• The selected frame colour is correct.
• The connector and antenna layouts match.
• The original device is not an S23, S23 FE, or S23 Ultra.

Installation Notes

Professional installation is strongly recommended.

Screen-with-frame replacement requires complete disassembly of the phone and transfer of multiple delicate internal components.

Improper handling may damage:

• OLED display
• Touchscreen
• Logic board
• Battery
• Cameras
• Fingerprint sensor
• Charging-port assembly
• Wireless-charging coil
• NFC components
• Antennas
• Side-button flex cables
• Speakers
• Microphones
• Internal connectors
• Back cover

Before final installation:

• Confirm the complete device model number.
• Confirm regional and frame compatibility.
• Confirm the selected frame colour.
• Compare the replacement assembly with the original frame.
• Inspect the screen, frame, flex cables, and connectors.
• Check for shipping or handling damage.
• Inspect the original battery for swelling or deformation.
• Power off the phone.
• Disconnect the battery before connecting or disconnecting the screen.
• Keep screws organized by location and length.
• Transfer all required thermal pads, brackets, meshes, seals, and cushions.
• Do not force connectors into place.
• Do not sharply bend, fold, puncture, or stretch flex cables.
• Avoid touching camera lenses and internal optical surfaces.
• Confirm correct fingerprint-sensor alignment.
• Confirm correct antenna and wireless-charging-coil placement.
• Test the display before resealing the back cover.
• Test black, white, grey, red, green, and blue backgrounds.
• Test brightness at low and high levels.
• Test adaptive brightness.
• Test Always-On Display.
• Test refresh-rate operation.
• Test touch response across the complete display.
• Test all edges and corners.
• Test multi-touch gestures.
• Test fingerprint recognition.
• Test the front and rear cameras.
• Test the earpiece speaker and loudspeaker.
• Test all microphones.
• Test vibration.
• Test wired charging and USB connectivity.
• Test wireless charging.
• Test NFC where applicable.
• Test Wi-Fi, Bluetooth, cellular reception, and 5G where available.
• Test proximity and ambient-light functions.
• Check for overheating or abnormal battery drain.
• Confirm that the back cover sits evenly.
• Do not permanently seal the phone until all functions have been tested.

Bent pins, damaged sockets, torn flex cables, excessive heat, pressure, incorrect screw placement, or improper component transfer may permanently damage the display or phone.

Water-Resistance Notice

Opening the Samsung Galaxy S23+ compromises its original factory seal.

Replacement adhesive may help reduce exposure to dust and incidental moisture, but the original IP rating and factory water resistance cannot be restored or guaranteed after repair.

A repaired device should not be relied upon for:

• Swimming
• Showering
• Underwater photography
• Exposure to steam
• Heavy rain
• High-humidity environments
• Other deliberate liquid exposure

Sealing performance may be reduced by:

• Frame damage
• Back-cover damage
• Adhesive quality
• Improper cleaning
• Uneven pressure
• Component misalignment
• Previous repairs
• Corrosion
• Production tolerances

Avoid exposing the repaired device to water, steam, high humidity, or other liquids.

Package Contents

Depending on the selected option:

Refurbished Original OLED with Frame

• 1 × Refurbished original OLED replacement screen assembly
• 1 × Compatible preinstalled middle frame

Genuine Samsung Service Pack with Frame

• 1 × Genuine Samsung Service Pack display assembly
• 1 × Genuine preinstalled middle frame
• Additional small components only where included by Samsung

No battery, back cover, fingerprint sensor, cameras, charging-port assembly, tools, clamps, adhesive, or installation service is included unless specifically stated.

Warranty

This component includes a 30-day limited parts-only warranty against confirmed manufacturing or refurbishment defects, subject to the applicable 3C-Easy Markham Component Warranty.

The warranty does not cover:

• Cracked, chipped, scratched, or shattered glass
• Internal OLED damage
• Black spots, lines, bleeding, or discolouration caused by impact or pressure
• Touch failure caused by installation damage
• Damage caused by a swollen battery
• Damage caused by incorrect component transfer
• Existing burn-in or image retention on a refurbished panel
• Minor brightness, colour, or uniformity variation on a refurbished panel
• Minor cosmetic variation consistent with a refurbished component
• Reduced brightness compared with a new Service Pack display
• Fingerprint-recognition problems caused by the original sensor, alignment, installation, software, screen protectors, or unrelated hardware
• Adaptive refresh-rate issues caused by settings, software, battery condition, or logic-board faults
• Torn, folded, punctured, stretched, or damaged flex cables
• Bent connector pins or damaged logic-board sockets
• Damaged antennas or cellular components
• Incorrect model, region, frame colour, or revision selection
• Installation in an incompatible device
• Improper installation
• Physical, impact, pressure, or twisting damage
• Liquid, moisture, or corrosion damage
• Damage caused by excessive heat
• Back-cover or adhesive failure
• Water-resistance or sealing limitations
• Display faults caused by the logic board
• Software, firmware, calibration, or compatibility limitations
• Damage to the battery or other internal components during installation
• Labour, diagnostics, installation, removal, shipping, or related repair costs

The screen must be connected and fully tested before final installation.

Remove protective films only after confirming correct image, touch, brightness, refresh-rate behaviour, fingerprint compatibility, frame fitment, and overall function.

Components showing installation or physical damage may not qualify for warranty coverage.

Important Notes

• Replacement screen assembly for Samsung Galaxy S23+ 5G.
• Intended for compatible SM-S916 models.
• Available as refurbished original OLED with frame or genuine Samsung Service Pack with frame.
• Confirm the complete model number before ordering.
• Regional frame and antenna configurations may differ.
• Confirm the selected frame colour before ordering.
• This screen is not compatible with the S23, S23 FE, or S23 Ultra.
• The refurbished option uses an original Samsung OLED panel with restored glass and related materials.
• The refurbished option is not equivalent to a new Samsung Service Pack display.
• Minor cosmetic, brightness, colour, uniformity, or image-retention variation may be present on refurbished displays.
• Service Pack contents and preinstalled components may vary.
• Internal components must be transferred from the original phone unless specifically included.
• The fingerprint sensor may require transfer and careful alignment.
• Fingerprint performance may be affected by screen protectors and installation quality.
• Check the battery for swelling before transferring it.
• Test image, touch, refresh rate, fingerprint recognition, charging, cameras, speakers, microphones, vibration, sensors, wireless charging, NFC, and connectivity before sealing the phone.
• No tools or adhesive are included unless specifically stated.
• Original water resistance cannot be restored or guaranteed after repair.
• Professional installation is strongly recommended.
• Product appearance, markings, frame shade, flex layout, included components, and packaging may vary between production batches.

Samsung, Galaxy, Galaxy S, Dynamic AMOLED, and related trademarks belong to Samsung Electronics Co., Ltd. and are used only to identify product compatibility. 3C-Easy Markham is not affiliated with or endorsed by Samsung Electronics.