UAG's Mouve Case w/ MagSafe Compatible with Samsung Z Fold 8

UAG Mouve Case with MagSafe Compatibility for Samsung Galaxy Z Fold8 – Ash

Protect your Samsung Galaxy Z Fold8 while maintaining its slim folding functionality with the UAG Mouve Case with MagSafe Compatibility.

Engineered specifically for Samsung’s foldable Galaxy Z Fold8, the Mouve combines a lightweight polycarbonate backplate with a flexible, impact-resistant TPU surround. Its precision-fit two-piece construction protects both sections of the phone while leaving the hinge open for unrestricted folding and unfolding.

An embedded magnetic module provides compatibility with many MagSafe-style magnetic accessories, Qi wireless chargers, magnetic stands, wallets, grips, battery packs, and vehicle mounts. Air-Soft corners help cushion common impacts, while raised screen and camera protection reduce direct contact with flat surfaces.

The case meets MIL-STD-810G 516.6 military drop-test standards, providing streamlined everyday protection without the weight and bulk of a traditional heavy-duty foldable case.

Compatible Device: Samsung Galaxy Z Fold8
Series: UAG Mouve
Colour: Ash
Manufacturer SKU: 214562113131
UPC: 840283931635

Compatible Models

Designed specifically for:

• Samsung Galaxy Z Fold8

Always confirm the exact phone model before purchasing or installing the case. Device information can normally be found under:

Settings → About Phone → Model Name / Model Number

This case is engineered around the Galaxy Z Fold8’s specific:

• Exterior dimensions
• Folding mechanism
• Cover display
• Rear camera arrangement
• Side-button placement
• Speaker and microphone openings
• USB-C charging port
• Wireless-charging coil position

It should not be assumed to fit:

• Samsung Galaxy Z Fold8 Ultra
• Samsung Galaxy Z Fold7
• Samsung Galaxy Z Fold6
• Samsung Galaxy Z Fold5
• Samsung Galaxy Z Flip8
• Other Samsung Galaxy phones

Foldable smartphones with similar appearances may still have different dimensions, hinge clearances, camera layouts, and button positions.

Package Contents

• 1 × UAG Mouve two-piece protective case
• Adhesive components pre-installed or included for secure attachment
• Colour: Ash

Samsung Galaxy Z Fold8, screen protectors, chargers, magnetic accessories, and other pictured items are not included.

Key Features

Precision Two-Piece Foldable Design

The UAG Mouve uses a model-specific two-piece construction designed for the front and rear sections of the Samsung Galaxy Z Fold8.

Each section fits around the corresponding half of the phone, allowing the device to open and close normally while maintaining protective coverage around the exterior frame.

The two-piece design provides:

• Full folding and unfolding functionality
• Protection for both phone sections
• Access to the exterior cover display
• Access to the side buttons
• Access to the USB-C charging port
• Minimal interference with the folding mechanism
• A slimmer profile than many full-hinge rugged cases

The two sections are not interchangeable and must be installed in the correct orientation.

Open-Hinge Design

The Mouve uses an open-hinge design, leaving the Galaxy Z Fold8’s folding hinge exposed rather than enclosing it inside a moving protective cover.

This design helps preserve:

• Smooth folding and unfolding
• The phone’s relatively slim profile
• Easier pocket and bag storage
• Reduced hinge-area bulk
• Full access to the folding mechanism

The open-hinge design does not protect the hinge from every scratch, impact, or direct drop. Customers requiring complete hinge coverage should select a case specifically designed with an integrated hinge protector.

Adhesive-Assisted Secure Fit

The case includes adhesive to help secure its two sections to the phone.

Adhesive support is particularly important for foldable-phone cases because the front section cannot wrap fully around the device in the same manner as a conventional one-piece case.

The adhesive helps reduce:

• Case movement
• Sliding during folding
• Accidental separation
• Uneven alignment
• Loose-fitting case sections

For best adhesion:

1. Clean and dry the phone before installation.
2. Remove all dust, oil, and moisture.
3. Avoid touching exposed adhesive.
4. Align each section before applying pressure.
5. Press the case firmly and evenly into place.
6. Avoid removing and reinstalling the case unnecessarily.

Adhesive strength may decrease after repeated removal or exposure to dust, skin oils, moisture, heat, or cleaning products.

Built-In Magnetic Module

The Mouve includes an embedded magnetic module built into the polycarbonate section of the case.

It can provide magnetic attachment for many compatible:

• MagSafe-style chargers
• Qi wireless chargers with magnetic alignment
• Magnetic vehicle mounts
• Magnetic wallets
• Magnetic grips
• Magnetic stands
• Magnetic battery packs
• Other magnetic accessories

Because the magnetic module is built into the case, a separate adhesive magnetic ring is not normally required. UAG also states that the case supports compatible contactless payment functions.

MagSafe-Style Accessory Compatibility

MagSafe is an Apple-developed magnetic accessory system. This UAG case uses a compatible magnetic arrangement so many MagSafe-style accessories can attach to the Samsung Galaxy Z Fold8.

The case does not convert the Galaxy Z Fold8 into an Apple-certified MagSafe device.

Accessory performance depends on:

• Accessory design
• Magnetic strength
• Alignment
• Charger compatibility
• Phone software
• Device temperature
• Accessory size and weight
• Installation position

Some accessories may attach magnetically without supporting their maximum advertised charging speed or full functionality.

Qi Wireless-Charging Compatibility

The case is designed to remain compatible with supported Qi wireless chargers.

Wireless charging requires:

• A Samsung Galaxy Z Fold8 that supports wireless charging
• A compatible wireless charger
• A suitable power adapter
• Correct alignment
• A properly installed case
• Supported temperature and charging conditions

The magnetic module helps position compatible chargers but does not independently generate charging power.

Actual charging speed depends on the phone, charger, power adapter, software, battery level, device temperature, and accessory configuration.

Magnetic Accessory Placement

The magnetic ring is positioned around the compatible wireless-charging area of the phone.

Because the Galaxy Z Fold8 has a large foldable body and prominent camera assembly, certain magnetic accessories may:

• Extend beyond the rear panel
• Sit close to the camera area
• Prevent the phone from resting flat
• Feel unbalanced when the phone is unfolded
• Interfere with comfortable one-handed use
• Reduce compatibility with other attached accessories

Confirm the fit and stability of each magnetic accessory before regular use.

MIL-STD-810G 516.6 Drop-Test Compliance

The UAG Mouve meets MIL-STD-810G 516.6 military drop-test standards.

This standard evaluates protective performance through repeated controlled drops under specified laboratory conditions. UAG describes the case as providing increased shock protection under this standard.

Military drop-test compliance does not make the phone indestructible and does not guarantee protection against every accident.

Damage may still occur depending on:

• Drop height
• Impact angle
• Surface hardness
• Whether the hinge is struck
• Whether the phone is open or folded
• Existing phone damage
• Installation quality
• Repeated impacts
• Case condition
• Environmental temperature

Foldable phones contain moving components and flexible display layers that may remain vulnerable even when the exterior is protected.

Impact-Resistant Soft Core

The flexible TPU surround creates an impact-resistant layer around the compatible exterior edges of the phone.

This soft core helps:

• Absorb minor shock
• Cushion everyday bumps
• Protect exterior edges
• Reduce direct frame contact
• Improve grip and handling

UAG identifies an impact-resistant soft core as one of the Mouve case’s primary protective features.

Air-Soft Corner Protection

The case incorporates UAG’s Air-Soft corner cushioning.

Phone corners commonly receive concentrated impact energy during a drop. The Air-Soft design provides additional cushioning around these vulnerable areas to help manage and distribute impact.

Air-Soft corners reduce certain risks but cannot prevent all frame, display, hinge, camera, or internal damage.

Polycarbonate Backplate

The Mouve uses a lightweight polycarbonate backplate to provide structure and exterior protection.

Polycarbonate helps provide:

• Structural rigidity
• Resistance to everyday impacts
• Protection from direct surface contact
• Support for the embedded magnetic module
• Reduced flex across the rear case section
• A lightweight overall design

Polycarbonate is durable but may still develop scratches, scuffs, discolouration, or other cosmetic wear with regular use.

TPU Surround Frame

The flexible TPU frame surrounds the compatible edges of the phone.

TPU helps provide:

• Shock absorption
• Flexibility during installation
• Edge protection
• Improved handling
• Resistance against minor bumps
• Secure contact around the phone frame

TPU may gradually show wear, stretching, staining, or material ageing after prolonged exposure to heat, sunlight, skin oils, chemicals, or repeated removal.

Tactile Side Grip

The case features textured side surfaces intended to improve grip and reduce accidental slipping.

The tactile grip may assist when:

• Opening or closing the phone
• Holding the phone while unfolded
• Operating the cover display
• Taking photographs
• Removing the phone from a pocket or bag
• Using the phone one-handed

No grip texture can prevent every drop, especially when the case is wet, oily, dusty, or contaminated.

Raised Screen Surround

The Mouve includes raised protection around the compatible exterior screen area.

When the folded phone is placed face-down on a smooth, flat surface, the raised edge helps reduce direct contact between the cover display and the surface below.

Protection remains limited when:

• The phone lands on an uneven object
• An impact strikes the display directly
• The screen is already cracked
• The case is installed incorrectly
• No screen protector is installed
• The raised border becomes worn or damaged

A compatible cover-screen protector is recommended for additional protection.

Raised Camera Bezel

A raised camera bezel helps reduce direct contact between the rear camera lenses and smooth, flat surfaces.

It may help protect the camera area against:

• Surface abrasion
• Minor scratches
• Routine placement wear
• Dust and debris on desks or counters

The camera lenses may remain vulnerable to direct impacts, sharp objects, sand, metal fragments, and uneven surfaces.

Featherlight Construction

The Mouve is designed to provide impact resistance without adding the bulk associated with many heavy-duty foldable cases.

Its lightweight PC and TPU construction helps preserve:

• Comfortable handheld use
• Easier pocket and bag storage
• Normal folding operation
• Convenient access to the cover display
• The relatively slim character of the Galaxy Z Fold8

UAG describes the Mouve as featherlight and durable.

Clean Matte Ash Finish

The Ash colour provides a neutral, understated appearance with a clean matte finish.

The matte surface may reduce the visibility of some fingerprints compared with a glossy case, although it can still show:

• Skin oils
• Dust
• Makeup
• Fabric dye
• Scuffs
• Cleaning residue
• Normal surface wear

Colour and finish may appear slightly different depending on lighting, screen settings, and production batch.

Cover-Screen Accessibility

The case maintains access to the Galaxy Z Fold8’s exterior cover display.

The cover screen can continue to be used for supported functions such as:

• Calls
• Messages
• Notifications
• Applications
• Camera controls
• Media playback
• Navigation
• Quick settings

The case does not include a built-in glass protector for the cover display unless specifically shown or stated on the retail packaging.

A separate compatible, case-friendly cover-screen protector may be installed.

Inner Foldable Display Notice

The Samsung Galaxy Z Fold8 uses a flexible internal folding display.

This case does not provide a rigid protector for the inner display and cannot prevent:

• Pressure damage
• Punctures
• Internal OLED damage
• Crease development
• Damage caused by trapped debris
• Fingernail marks
• Damage caused by closing objects inside the phone
• Damage caused by removing the factory-installed film
• Damage caused by unauthorized screen protectors

Do not install standard rigid tempered glass over the internal folding display.

Follow Samsung’s instructions regarding the factory-applied inner screen protector and any required replacement service.

Hinge-Protection Limitation

The open-hinge design leaves the folding hinge exposed.

The hinge may remain vulnerable to:

• Direct impacts
• Scratches
• Sand
• Dust
• Metal debris
• Cosmetic wear
• Damage during open-position drops

The open design prioritizes slimness and full folding functionality rather than complete hinge enclosure.

Wireless-Charging Guidance

For best wireless-charging performance:

1. Remove magnetic wallets, grips, and stands.
2. Centre the charger over the magnetic ring.
3. Confirm that the charging indicator appears.
4. Use a suitable power adapter and cable.
5. Keep the phone and charger ventilated.
6. Stop charging if excessive heat develops.

Some warmth during wireless charging is normal. Excessive heat, repeated charging interruptions, deformation, or a burning smell is not normal.

Magnetic Wallets

A compatible magnetic wallet may attach to the case, but:

• Attachment strength varies by accessory.
• Excessive cards may weaken the connection.
• Wireless charging normally requires wallet removal.
• Magnetic-stripe cards may be affected by strong magnets.
• NFC and payment performance may vary.
• Large wallets may feel unbalanced on an unfolded phone.

Always confirm that the wallet is securely attached before carrying the phone.

Magnetic Vehicle Mounts

Before driving:

1. Attach the phone while the vehicle is stationary.
2. Confirm that the mount securely supports the phone’s size and weight.
3. Test the mount with the phone folded and unfolded.
4. Position it outside all airbag deployment areas.
5. Ensure that it does not obstruct the driver’s view.
6. Do not adjust the phone or mount while driving.

The Galaxy Z Fold8 is larger and heavier than a conventional smartphone. Not every magnetic vehicle mount is designed to support a foldable phone securely.

Rough roads, sudden movement, vibration, heat, or insufficient magnetic strength may cause detachment.

Magnetic Battery Packs

Compatible magnetic battery packs may attach to the case, but fit and charging performance vary.

Confirm that the battery pack:

• Aligns with the charging coil
• Does not interfere with the hinge
• Does not press against the camera bezel
• Does not cause the phone to become unstable
• Does not generate excessive heat
• Remains securely attached during handling

Some battery packs may be too large to fit comfortably around the Galaxy Z Fold8 camera layout.

Magnetic Grip and Stand Accessories

Magnetic grips and stands may provide easier handling or hands-free viewing.

However:

• The unfolded phone creates greater leverage against the magnetic connection.
• A weak accessory may rotate or detach.
• Heavy accessories may make the phone difficult to balance.
• The phone should not be lifted solely by an untested magnetic grip.
• Attachment strength should be tested over a soft surface.

The standard Mouve case does not include an integrated kickstand or grip. Those features are offered on the separate Mouve XTE product.

Contactless Payment Notice

UAG states that the embedded magnetic module supports compatible payment functions.

Contactless payment performance depends on:

• The phone’s NFC hardware
• Samsung Wallet or another supported payment application
• Bank and card compatibility
• Payment-terminal design
• Phone settings
• Regional service availability
• Attached accessories

Remove magnetic wallets, metal plates, or other rear accessories when they interfere with NFC communication.

Screen-Protector Compatibility

The case may be compatible with properly sized, case-friendly protectors for the exterior cover display.

Compatibility may vary with:

• Edge-to-edge tempered glass
• Privacy protectors
• Extra-thick protectors
• Off-centre installation
• Protectors extending too close to the case edge
• Full-body protective films

An incompatible screen protector may lift when the case is installed.

Do not install unauthorized rigid glass over the inner folding display.

Camera-Lens Protector Compatibility

Separate camera-lens protectors may fit when they remain within the Mouve’s raised camera opening.

Compatibility is not guaranteed with:

• Oversized camera-island protectors
• Thick metal lens rings
• One-piece glass camera covers
• Decorative protectors
• Off-centre installations

An incompatible protector may prevent the case from sitting evenly or may create pressure around the camera assembly.

S Pen and Stylus Notice

Where supported by the connected Galaxy Z Fold8 model, stylus performance depends on the device, stylus, display, and attached magnetic accessories.

Strong magnetic chargers, wallets, mounts, or battery packs may temporarily affect stylus detection or accuracy in nearby areas.

When stylus performance appears inconsistent:

1. Remove the attached magnetic accessory.
2. Test the stylus again.
3. Reposition or discontinue use of the interfering accessory.

The case does not include an S Pen or an integrated S Pen holder unless specifically stated on the retail packaging.

Installation Preparation

Before installation:

1. Confirm that the phone is a Samsung Galaxy Z Fold8.
2. Remove any previous case.
3. Disconnect cables and accessories.
4. Clean the phone’s exterior.
5. Remove all dust, oil, and moisture.
6. Identify the front and rear case sections.
7. Review the supplied installation instructions.
8. Avoid touching the adhesive unnecessarily.

Do not install the case on a wet, dirty, damaged, bent, or swollen phone.

Installation Instructions

1. Place the Galaxy Z Fold8 on a clean, padded surface.
2. Identify the front cover-screen section and rear camera section.
3. Remove the protective liners from the adhesive areas when instructed.
4. Align the front section around the cover display.
5. Press the front section gently and evenly into place.
6. Align the rear section with the camera and USB-C port.
7. Press the rear section securely into place.
8. Apply firm, even pressure over the adhesive areas.
9. Open and close the phone slowly.
10. Confirm that neither section shifts.
11. Check all buttons, microphones, speakers, cameras, and ports.
12. Test wireless charging and magnetic accessories separately.

Do not force the case onto the phone when the sections are misaligned.

Removal Instructions

Adhesive-assisted foldable cases should be removed carefully.

1. Disconnect all chargers and magnetic accessories.
2. Turn off the phone.
3. Work over a soft, clean surface.
4. Slowly release one case section from an exterior corner.
5. Avoid inserting metal tools between the phone and case.
6. Do not pull sharply near the hinge or displays.
7. Remove the second section carefully.
8. Clean remaining adhesive using a device-safe method.

Repeated removal may weaken the adhesive. Replacement adhesive may be required before reinstalling the case.

Cleaning and Care

To clean the case:

1. Remove it carefully from the phone.
2. Wipe away loose dust and debris.
3. Use a soft, slightly damp microfiber cloth.
4. Apply a small amount of mild soap when necessary.
5. Avoid saturating adhesive areas.
6. Dry the case completely before reinstalling it.

Do not use:

• Bleach
• Acetone
• Paint thinner
• Strong solvents
• Abrasive cleaners
• Scouring pads
• Metal brushes
• Dishwashers
• Washing machines
• Hair dryers
• Open flames
• Excessive heat

Strong chemicals may damage the finish, weaken the case, affect the adhesive, or degrade the surrounding materials.

Preventing Trapped Debris

Dust, sand, and small particles can collect between the phone and case.

Inspect and clean the case periodically, particularly after exposure to:

• Beaches
• Workshops
• Construction areas
• Outdoor environments
• Dusty pockets or bags
• Food spills
• Metal particles

Debris trapped beneath the case may scratch the phone’s frame or exterior surfaces.

Device Heat and Charging

Some warmth during wireless charging, gaming, navigation, video recording, software updates, multitasking, or demanding applications can be normal.

Wireless charging may generate more heat than wired charging.

Remove attached accessories and discontinue charging when:

• The phone becomes unusually hot
• Charging repeatedly starts and stops
• The case begins to deform
• The phone displays temperature warnings
• A burning smell develops
• The battery appears swollen
• The phone housing begins to separate

A swollen or damaged battery requires professional inspection. Do not use the case to force a separating phone back together.

Important Protection Limitations

• Meets MIL-STD-810G 516.6 drop-test standards, but device survival is not guaranteed.
• Does not provide complete hinge protection.
• Does not include an inner-display protector.
• Does not prevent every scratch, crack, dent, or impact.
• Does not protect against severe bending, twisting, or crushing.
• Is not waterproof.
• Is not a sealed dustproof enclosure.
• Does not restore the phone’s original water-resistance rating.
• Does not repair existing device damage.
• Does not protect data stored on the phone.
• Magnetic compatibility does not guarantee compatibility with every accessory.
• Wireless-charging speed depends on the complete charging setup.
• Adhesive strength may decrease after repeated removal.
• Does not include an integrated stand or grip.
• Chargers and magnetic accessories are sold separately.

A protective case reduces certain risks but cannot eliminate them.

Product Quality Notes

This is a genuine UAG Mouve Series case, not an unbranded or generic magnetic foldable-phone cover.

UAG specifies the following features for the Galaxy Z Fold8 model:

• Lightweight polycarbonate backplate
• Shock-absorbing TPU surround
• Air-Soft corner cushioning
• Impact-resistant soft core
• Tactile side grip
• Raised screen protection
• Raised camera bezel
• Open-hinge construction
• Two-piece precision fit
• Adhesive-assisted installation
• Embedded magnetic module
• MagSafe-style accessory compatibility
• Qi wireless-charging compatibility
• Payment support
• MIL-STD-810G 516.6 drop-test compliance

Product packaging, finish texture, adhesive presentation, printed graphics, and minor construction details may vary by production batch without affecting the case’s intended compatibility.

Warranty

This product is covered by the applicable UAG limited manufacturer warranty, subject to UAG’s current warranty period, proof-of-purchase requirements, authorized-retailer requirements, regional policies, exclusions, and claim procedures.

Manufacturer warranty coverage generally applies to qualifying defects in materials or workmanship. It does not normally cover:

• Damage to the Samsung phone
• Normal wear and material ageing
• Cosmetic scratches or scuffs
• Accidental drops or impacts
• Improper installation
• Adhesive contamination or weakening
• Repeated removal and reinstallation
• Modification of the case
• Misuse or abuse
• Heat or liquid damage
• Damage caused by incompatible accessories
• Magnetic-accessory detachment
• Loss or theft

The warranty applies to the UAG case and does not insure or replace the connected phone, charger, wallet, mount, battery pack, or other accessory.

Please retain the original purchase receipt and packaging.

Intellectual Property Disclaimer

UAG, Urban Armor Gear, Mouve, Air-Soft, Samsung, Galaxy, S Pen, Samsung Wallet, MagSafe, Qi, and all related names, logos, designs, and trademarks are the property of their respective owners.

2718240 Ontario Inc. O/A 3C-Easy Markham is an independent retailer and is not affiliated with, sponsored by, authorized by, or endorsed by Samsung Electronics, Apple Inc., Urban Armor Gear, or the Wireless Power Consortium unless expressly stated.

Samsung Galaxy, MagSafe, and Qi references are used solely to identify device and accessory compatibility.

Product Specifications

• Brand: UAG / Urban Armor Gear
• Product series: Mouve
• Product type: Two-piece magnetic protective case
• Compatible device: Samsung Galaxy Z Fold8
• Manufacturer SKU: 214562113131
• Colour: Ash
• Construction: Polycarbonate backplate with TPU surround
• Built-in magnetic module: Yes
• MagSafe-style accessory compatible: Yes
• Qi wireless-charging compatible: Yes
• Contactless-payment compatible: Yes
• Open-hinge design: Yes
• Full hinge coverage: No
• Air-Soft corner cushioning: Yes
• Impact-resistant soft core: Yes
• Tactile side grip: Yes
• Raised screen surround: Yes
• Raised camera bezel: Yes
• Adhesive-assisted installation: Yes
• Military drop-test standard: MIL-STD-810G 516.6
• Built-in inner-screen protector: No
• Built-in cover-screen protector: No
• Built-in kickstand: No
• Built-in phone grip: No
• Built-in S Pen holder: No
• Waterproof: No
• Condition: New retail product
• UPC: 840283931635